Try to get Echo shopping list to connect with reminders of IOS

Try to use IFTTT to get the two to work together. I tried two recipes that are predefined:

"When I add something to my Amazon Echo shopping list, add it to my iOS reminders as well."

and

"When you add something to your Echo, Amazon shopping list add it to iOS reminders too"

I also tried to create the recipe manually after http://www.cnet.com/how-to/set-up-ifttt-channels-for-your-amazon-echo/#! as the best I could. When the two running the premade - those all said it works in newspapers, but the points never appear in the list of designated reminders (I have a commercial named list and this is where it is supposed to go). It will immediately appear on my shopping list Amazon Alexa on the Amazon site.

I even created a new shopping list called simply 'test' and who does not. The list that I named 'Shopping' is shared with my wife and I thought that would be a problem but obviously not.

I checked the channels and the channels of reminders and Alexa channel show connected.

Suggestions?

Nevermind, works when I put in place on the iphone and not on the ipad

Tags: iPhone

Similar Questions

  • Impossible to download avast antivirus get message... the connection with the server has been reset

    I have a laptop Samsung RV510 with windows 7, need a free antivirus software

    try to download avvas as wel as AVG

    Get message afte a vew of download twinks... Impossible to download avast antivirus get message... the connection with the server has been reset

    Help, please

    Other downloads, for example widows day running ok?

    You download from the site of decision makers or one of the other indirect sites?

    MSE of MS is free

    http://Windows.Microsoft.com/en-GB/Windows/Security-Essentials-download

  • I have subscription for adobe cc and when I try to get the first he comes up with an unusable version of first cs6 for some reason, I can't change it, please help me

    I have subscription for adobe cc and when I try to get the first he comes up with an unusable version of first cs6 for some reason, I can't change it, please help me

    Your system meets the criteria for more recent versions of first?

    Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

  • Problems to get my Vista PC to connect with my Xbox 360 with an ics connection.

    I have a HTC Touch Pro phone on the Sprint network.  I have their phone as modem data unlimited.  I'm attempting to use ICS to share my internet connection through my laptop using my HTC Touch Pro as a modem.  I get a message saying, "an error occurred while internet connection sharing was being enabled."  Ideas or suggestions on how to get this up and running?

    Hello

    Welcome to Microsoft Windows 7 answers Forum!

    You can try the steps below and check if the problem is resolved.

    Click Start, click Run, type services.msc and click OK. To activate a service, look for it in the right pane, double-click its entry. Don't forget that its Startup Type is set to automatic, and then click OK. All the following services must be configured to use ICS,

    Connection sharing services Internet (ICS) needs to function properly:
    1. the base filtering engine of
    2. remote Procedure Call (RPC)
    3 DCOM Server process Launcher
    4. network connections
    5. service of Network Store Interface
    6 DCOM Server process Launcher
    7 remote Access Connection Manager
    8 phone
    9. Windows Management Instrumentation.

    After checking and automatic startup for each of these services configuration, close the Services window and restart the computer, and look for the issue that you are facing.

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • Cannot get my android phone to connect with bluetooth on my computer help

    not a lot of details, click Add wireless bluetooth and make the phone discoverable.

    Hi bobbytedrich,

    ·         What happens when you try to connect the phone to the computer?

    ·         You receive an error message?

    ·         He has already worked on the computer?

    ·         What is the brand and model of the phone?

    Follow the steps in the article.

    Set up a Bluetooth compatible device

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    Also install the drivers and software on the computer. You can also consult the phone manual for more help and information.

  • Try to get my Centro to Hot Sync with my new Dell with Vista!

    I just bought a new computer and assume everything I had to do was download the latest version of Palm Desktop 6.2 and outlook 2007 and plug it in with my USB and click on the hot sync button. I get "driver software for your Palm Treo 680". My phone is a centro (I use a palm Treo 680 USB cord, but it worked on my last computer). It is said, insert the floppy disk provided with your phone, but the disk is not moving the problem at all. Any suggestions?

    What version of Vista?  32-bit or 64-bit?

    If 64-bit, you cannot synchronize via a cable.   There are number of threads of instruction at the top of this section relating to synchronization with Vista64.  One possible way is via BlueTooth or Infra-red...

    WyreNut

  • Rewrite the query, select below or try to get the necessary O/P

    Hello..

    My example of data.,.

    Create table customer (name varchar2 (10), telephone1 telephone2 number (10), number of phone3 (10), (10) number, bitwisephone number (10));

    Insert into customer values('a',23456,67890,null,12345);

    Insert into customer values ('b', 67459,89760,null, 37689);

    create table do_not_call (dont_call number (10));

    insert into do_not_call values (67890);

    insert into do_not_call values (37689);

    Question: -.
    --------------

    Customer 'a' has value of numbers1 as 23456.check if telephone1 exists in the do_not_call table.
    In fact there is no, so set the bit for numbers1 as "o" like wise search telephone2
    & phone3.after update of the bitwisephone for each client should be as the output below.


    Need to O/P: -.
    -------------------

    name bitwisephone

    a 010
    b 001


    For that matter... I use "any" operator...



    SELECT name, case when numbers1 = all (SELECT dont_call FROM do_not_call) and then put an end to '1' other '0'.
    -case when telephone2 = all (SELECT dont_call FROM do_not_call) and then put an end to '1' other '0'.
    -case when phone3 = all (SELECT dont_call FROM do_not_call) then '1' other '0' end 'Bits '.
    OF THE customer;


    Is there any other way to get the necessary O/P?


    Thank you!!

    Kind regards
    VijayRajaram.

    Looks like one already answered Re: rewrite the query, select below or try to get the necessary O/P

    with
    customer(name,phone1,phone2,phone3,bitwisephone) as
    (select 'a',23456,67890,12345,null from dual union all
     select 'b',67459,89760,37689,null from dual
    ),
    do_not_call(dont_call) as
    (select 67890 from dual union all
     select 23456 from dual union all
     select 37689 from dual
    )
    select name,
           to_char(mod(trunc(sum(weight)/4),2))||
           to_char(mod(trunc(sum(weight)/2),2))||
           to_char(mod(sum(weight),2)) bitwisephone
      from (select name,phone1 phone,4 weight
              from customer
            union all
            select name,phone2,2
              from customer
            union all
            select name,phone3,1
              from customer
           ) c,
           do_not_call d
     where c.phone = d.dont_call(+)
       and d.dont_call is not null
     group by name
    

    Please do not duplicate messages

    Concerning

    Etbin

  • How can I get the CompactRIO 9074 to communicate with TPC-2206 using variables of network?

    Hello
    I have trouble getting the Rio Compact to connect with my touch screen. The goal is to have the CRIO read in data values, update as network variables and then send them to the touch screen where they are displayed. I used the Distributed System Manager to verify that the CRIO updates the network variables.  I also created alias for the CRIO and PTC files to ensure they have the necessary IP addresses included.  I am able to PING the CRIO of the touch screen, so I don't think it's a problem of network connection. This leads me to believe that the CRIO works properly, hosts the variable library and broadcast on the network, but for some reason the touch panel knows not how to retrieve variables.  I have also noticed that when you change the "Properties" of the executable of touch panel, if the "Shared Variable deployment" section contains a box to checked then result is a mistake trying to "run" the executable file on the touchscreen, however if the box is left then repressed the executable runs without error. He still does not update the values of the CRIO however.
    I don't know what else to try, any help/ideas would be really appreciated!
    Thank you
    -Lindsey

    Equipment I use:
    PTC 2206 touch (Windows XP Embedded)
    CompactRIO 9074
    LabVIEW 2010

    Problem solved, thank you for your help!

    For anyone else having this problem in the future:

    As stated previously, the TPC2206 (touch screen) with Windows XP Embedded does not come with the support of shared variable engine installed.  To resolve this problem, I went to NI.com, typed in "LabVIEW Run-Time Engine 2010" in the search box (if you are using another version of LabVIEW, then find accordingly) and clicked on the second link "LabVIEW Run - Time Engine 2010 - (32-bit Standard RTE) - Windows 7/7 64 bit/Server 2003 R2 (32-bit) / XP/Vista/Vista x 64/Server 2008 R2 (64-bit)" "» downloaded, place the file on a USB key (my touch screen is not connected to the internet), connected to the touchscreen, installed the file and restarted the touch screen.

  • "Error 105: connection with a token to MaxUni" error when you add a server Essbase

    I was sent Hyperion Planning and Essbase 11.1.2.3 with Embedded WebLogic HTTP server under Windows 2008 Server R2. Then I applied the patch #17767309 (this is for server EAS - free 500). Then after connecting to the EAS web console as "admin", I added a knot of Essbase server and then trying to develop it, I get nothing underneath and the following message in the box at the bottom: "error 105: connection with a token to MaxUni.

    I have stopped all services of the EMP, deleted "tmp" folder "Oracle\Middleware\user_projects\domains\EPMSystem\servers\AdminServer" / I redeployed EAS server and Essbase using the EPM system configurator - it is the sequel to advice found in this thread: https://community.oracle.com/message/11325472#11325472

    Then I restarted all services of EPM and logged on to the console of Regional service as admin, once again, deleted and added an Essbase server again and I get the same "error 105: connection with a token to MaxUni ' when you try expand the Essbase server node again.

    How can I solve this? I'd appreciate a lot of clues!

    I saw something similar bez Essbase RTC was not updated to match the version of Essbase and EAS server. Download and apply the 17767299 hotfix that is Essbase RTC 500. This should solve the problem.

    THX

    Vivek

  • Bluetooth speaker no connection with iPod 5th generation

    Once solve you one problem, another pops up...

    A little more than a week ago, I bought an iHome iBT3, which is a protected against splashing, triangular-shaped speaker. It has bluetooth, which I used about three times now and it was working fine until today.

    The other day I had a problem with my iPod which translates into me trying the three methods; force reset, recovery of the device and reset all default settings. Although I have fixed my previous issue, when I tried to connect my speakers today, connected devices emerged as two things that I had never seen before. I chose the setting for iPod to 'forget' the devices and tried to connect my speakers.

    I watched for 15 minutes. The speaker tried to connect and connect and connect the iPod has tried to find the device, and they never linked between them; my iHome does not appear on my iPod and my iPod never read that there is a device in the region.

    I tried to force the delivery twice, the iPod and it has nothing and if it should happen again, I really, really don't like to restore my iPod because it took me two days and multiple handfuls of hair to do such a thing.

    Can I do to get my two devices to connect with each other?

    Thank you in advance.

    Update: The speaker is not connecting to my or my sister iPods.

    My father has a similar Bluetooth speaker if and which connects both of the devices.

  • I have lightroom cc... (how to get my mac laptop to synchronize with my desktop mac?)

    I have lightroom cc and I try to get my mac laptop to synchronize with my desktop mac...

    Lightroom is designed as a single user, single computer program. To synchronize two computers requires some hoops to jump through.

    Lightroom Mobile syncs one computer to multiple mobile devices.

    The easiest way (not prettier) synchronization of multiple computers is to catalog and images on an external drive and move the drive from one computer to another as needed.

  • whenever I try to connect to the internet (mozilla firfox) it says I have to buy vista security 2011 to clean my laptop. How can I get rid of this to connect online

    whenever I try to connect to the internet (mozilla firfox) it says I have to buy vista security 2011 to clean my laptop. How can I get rid of this to connect online

    Hello

    these rogue program names belong to a type of malware using different names but producing the same results

    Read and follow the EXACT at the below link removal instructions

    Read this information

    Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer.  When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:

    Windows XP rogue names
    Names of Windows Vista Rogue
    Windows 7 fake names
    XP Antivirus Vista anti-virus Win 7 antivirus
    XP Antivirus 2011 Vista anti-virus 2011 Win 7 anti-virus 2011
    XP Anti-Spyware Vista Anti-Spyware Win 7 AntiSpyware
    XP Antispyware 2011 Vista Antispyware 2011 Win 7 antispyware 2011
    XP Home Security Vista Home Security Win 7 Home Security
    XP Security 2011 Home Vista Security 2011 Home Win 7 Security 2011 Home
    XP Total Security Vista Total Security Win 7 Security Total
    XP Security 2011 Total Vista Total Security 2011 Win 7 Security 2011 Total
    XP security Vista security Win 7 Security
    XP security 2011 Vista Security 2011 Win 7 Security 2011
    XP Internet Security Vista Internet Security Win 7 Internet Security
    XP Internet Security 2011 Vista Internet Security 2011 Win 7 Internet Security 2011

    Follow the EXACT below removal instructions

    http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

  • When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#Cure please!"

    When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#".
    Cure please!

    Do you find it with other browsers?

    If not, then try asking using Firefox for a.

    That you get with other sites with Firefox?

  • When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

    problems of the DRC of vista for windows machine 7

    I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

    can someone shed light on this please?

    Hello

    Temporarily disable the security software on both computers and check if it makes a difference.

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • 'Local only' and 'Limited connectivity' is displayed when I try to connect with my laptop and I can't get online!

    Almost every day for the last 5 months or so, I try to get online and a "local only" or "limited connectivity" appears when trying to connect to my wireless internet.  It seems to do this whenever I try to get when another computer is also about that.  By example, if my mother found on the internet on his computer and I try to get on the internet too it does this thing 'local only' and I can't connect and it launches my mother of the internet too (she also has windows vista).  This seems to be a common problem with vista.  I don't understand all this technique _ so if you know how to fix it please don't try "computer talk" with me-keep simple or explain in detail.

    Hello
     
    Troubleshooting connection problems can be a challenge because there are so many possible causes. First of all, try the following steps:
    Step 1: Diagnose and repair the connection.
    1. open Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair.
    2. check the result.
     
    Step 2: Uninstall and reinstall the wireless card driver.
    Consult the manufacturer of the wireless device or the system manufacturer's Web site to download the driver of wireless network card.
    1. click on start, type devmgmt.msc and press to enter.
    2. expand network adapters.
    3. right click the network point sup wireless driver and click on uninstall.
    4 restart the computer for changes to take effect.
    5. install the driver for the wireless card and restart the computer.
    6. check connectivity.
     
    The other possible solution for this problem is to install the latest service pack on the computer. Visit this link for more information: http://support.microsoft.com/kb/932063
     
    Try the steps and post back with the results, so that we can help you better.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

Maybe you are looking for