try to install a program Runtime Error 52
original title: Runtime Error 52
There is a program that is given by my company for installation on our own pc/laptop. While the program works fine on pc/laptop to the all the other colleagues, but not mine. every time when I tried to install the program the error message 52 DURATION pop up and prevenet me install this program. Please let me know the reason and solution to fix this thanks a lot
Hi Guan,
1. what program are you trying to install?
2. how you try to install the program?
Method 1:
If you have any program of present old version installed on the system, then you can try to uninstall the same and check.
Method 2:
You can also perform a clean boot and see if you can install the program.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, you can refer to step 7 in the article mentioned above to put the computer to normal startup mode.
Tags: Windows
Similar Questions
-
When I try to install any programs, I receive the error message that the mia.lib was not found. What should I do to correct this?
Hello
Yes, it seems that this program is not running Windows XP. If the requirements for this program is Windows Vista or Windows 7, then the upgrade may solve your problem.I hope this helps. Just reply to the results.
-
Error 1327 Invalid drive: G:\ when I try to install a program
Hi all someone can help. When I try to install a program, it comes up with the error message above. Why? This has just started happening, and I don't know why. I have not changed any got to my knowledge.
Please, perform the following steps:
The ORB-click Start and type CMD into the search, command prompt right click the icon and left click on run as administrator
In the command prompt, type the following:
subst G: C:\
Press enterTry to install the software you want
-
Hello
I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:
C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.
I use a vista. I don't know how to solve this problem, many want to help.
Thank you.
Hi Colinthebrave:
Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.
Thank you for your message; Let us know how it goes.
o
o The System Restore tool
If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
To restore the operating system to an earlier point in time, follow these steps:
1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
2. in the System Restore dialog box, click on choose another restore point and then click Next.
3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
4. click on finish.
The computer restarts and system files and settings are back to the State they were in when the restore point was created.
Don
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I try to install a program I get error: "0045A3BB."
I got a new laptop, new computer for me has windows Vista. I try to install a program, directory of CAMPING, Woodall, I get an error message 0045A3BB. I have not had any problems with XP. What should I do?
Hello
See if that helps you.
!. Right-click on the setup.exe > and then select run as administrator to install it.
2. ask the manufacturer to program if it is Vista Compatible.
We can not help you with that that Microsoft no longer has the link Vista Compatibility Center available.
3. If the program is not Compatible Vista, install in XP Compatibility Mode
"Using Windows 7 or Vista Compatibility Mode.
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
See you soon.
-
c:\windows\winsxs\x86_microsoft. VC80.crt_... and so on is not designed to run on windows or it contains an error. Try to install the program using original install.
Hello
1. have you installed the driver of sound card on the computer?
2 is not available for a particular program or windows sound?Step 1: If you have not installed the sound card driver, then please visit the system manufacturer's Web site and download the driver audio compatible Vista and install it.For more information on "Hunting the drivers" visit this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardwareStep 2: If you have installed the driver for sound card and there is no sound on the computer, try the following steps.
1 visit the following link and click on "Run now" to diagnose and fix audio playback problems: http://support.microsoft.com/gp/no_sound
2. If the problem persists, visit the system manufacturer's Web site and download the driver audio compatible Vista and install it.Check this "Tips to solve common sound problems": http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problemsI hope this helps.Kind regards
Syed
Answers from Microsoft supports the engineer. -
Help, please!
I started my computer today and it came with this error:"sidebar.exe - incorrect image.
Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.I click on OK, then he said:
"Acrotray.exe - incorrect image.
Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.I click OK and then it says:
"hpqtra08.exe - incorrect image.
Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.Also I got an error report saying that windows sidebar stopped working.
My computer is VERY slow in all the commands I give.
I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.Do you have an idea what is happening with my computer and what I can do to fix this?
Thank you very much!
Hi deacon829,
You did changes to the computer before that happened?
Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,
Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Step 2: If you try to install any application before this program, try to uninstall them.
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.
Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.
Look for steps to restore of the system in the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
If the problem persists,
Step 4: A scanner online for any threat and try to correct
http://OneCare.live.com/site/en-us/Center/cleanup.htm
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How can I solve the error 2503 and 2502 codes when you try to install a program?
When I try to install a program I get the error 2503 and 2502 codes, what should I do to get rid of them?
2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer
http://support.Microsoft.com/kb/2438651
Also:
Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
1. in the menu 'Start', click on ' execute:.»
2. in the "Open" box, type "msiexec /unreg", and then press ENTER.
3. in the menu 'Start', click 'run '.
4. in the "Open" box, type "msiexec/regserver", and then press ENTER.
-----------------
Check your hard drive for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
--------------
then
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
-
Error "Unable to create the setup directory" when I try to install new programs.
I get an error that reads "Setup cannot create directory... error 5: access is denied" when I try to install new programs. I checked my permissions, and there is full control for all three options. I moved my UAC goes up and down without result and tried all that I could find online that might be able to help. I don't know what to do. Any help is appreciated. Thank you!
Had the same problem. It turns out my virtual drive not started correctly, if the TEMP folder that I moved to this location was not available.
-
How can I solve the error 16 when I try to install a program?
How can I solve the error 16 when I try to install a program?
In Adobe Creative Suite or Adobe Creative Cloud configuration error
-
I try to install a program, but get a message came
I try to install a program, but get a message pop up - windows that install Service could not be accessed. This can occur if the Windows Installer is not installed properly. Contact your Supprt staff for help - can someone help me please. I don't know if this is part of the same problem but when I tried to install a game I got a message - 1607 unable to install InstallShield Scripting Runtime thank - you
I try to install a program, but get a message pop up - windows that install Service could not be accessed. This can occur if the Windows Installer is not installed properly. Contact your Supprt staff for help - can someone help me please. I don't know if this is part of the same problem but when I tried to install a game I got a message - 1607 unable to install InstallShield Scripting Runtime thank - you
RE: Windows Installer Service could not be accessed
Try this tutorialhttp://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/
I can't answer the last question about the error code 1607.
-
Original title: communication failure 145905 [invalid header]
When you try to install a program I always get this error each time message: Server error 145905 communication failure [invalid header] would appreciate any help that anyone can provide. Thank you.
Hello
That is the application that you are trying to install?
I suggest you follow these methods and check.
Method 1: Run the hotfix to correct the following problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
Method 2: Perform the clean boot, try to install application.
Follow the suggestions of this link.
http://support.Microsoft.com/kb/310353
NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.
If the problem is specific to the program, I suggest you please contact the manufacturer of the program for utilities.I hope this helps!
-
I used my code from adobe, but when I try to install my program it still says I need to buy it. But I already did and I used my code.
You get 'buy' on Creative Cloud App?
If yes then disconnect you from Creative Cloud App and back panel
Sign out, sign in | Creative cloud desktop application
If you get the same status and then check your entries once hosts file
Log, activation, or connection errors. CS5.5 and later versions
-
installation of Windows in windows xp service
I started receiving messages that Windows Installer service is not properly installed when I try to install a program.
Running XP Home edition.
I tried to install Windows Installation Service 4.5 but that doesn't seem to make a difference
I also tried unsubscribing/re-enrollment msiexec.exe and that doesn't seem to make a difference.I tried to reinstall my HP scanjet 4890 software but complains the installation Windows installation service.
Hello
You did changes to the computer before the show?
I suggest you try the steps from the following link:
How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651#reso3 -
I have Windows XP Media Center Edition 2002 SP2, whenever I try to install sp3, that an error and I need to go to a previous configuration, what do I do to be able to install sp3?
I have enough information about your computer to give you assistance-oriented. This might help:
How to troubleshoot an installation fails to WinXP SP3 - http://support.microsoft.com/kb/950718 MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
Questions of IOS 9.3.2
Some of my buddies told me to NOT UPDATE to the new 9.3.2 in my iPad 2 Air, there are some issues like battery draining, Wi - Fi issues, Bluetooth problems, activation, applications, installation, problems and random reboots. Some one has met such pr
-
How can satellite P300-156 - I clean it?
Don't clean my laptop inside, but I did not now what live I have to remove.If someone take the back cover of any P300 to clean the fans, maybe send me photo or instructions, I have to do step by step. Thank you very much. PS:Sorry for English has som
-
Restart to restore the recovery disk
I copied information from hard drive to a flash drive. When I try to boot the computer to run the recovery disk, the computer will get not to a point to the "run". He is stuck in a cycle of trying to restart. Tried rebooting normally, finally a go
-
2 windows xp hard disk systems, then I remove one without doing damage to the other?
I WAS INSTALLING WINDOWS XP ON A NEW HARD DRIVE. HE SEEMS TO HAVE STOPPED WORKING. I RESTARTED THE INSTALLATION. NOW I HAVE 2 OPERATING SYSTEMS ON MY COMPUTER; HOW CAN I REMOVE WITHOUT DAMAGING OTHERS. DON'T WANT TO REFORMAT AND START OVER AS I H
-
Lost my perferred photo program in Windows 7
When my computer crashed, the technicans removed my photo program I was using. [I forgot the name of it.] Now when I download pictures from my camera it goes to Microsoft Office or something like that. I want the return of the program were I can cha