Try to install service pack 1 on vista. 8007045D error code.

Similar Questions

• Error code 800F0811 when you try to install service pack 2 for vista

  Original title: error code 800F0811 when trying to install service pack 2 for vista tried booting in minimum mode and reset my compents windows update or where he worked?

  When try to install service pack 2 for vista tried clean boot and reset my windows update components or where he worked? This two things were proposed during this same error that happened to a customer trying to download sp1

  Hello

  Review the information in the site mentioned below that can help you work with the question:

  http://support.microsoft.com/kb/947366#resolution3.

• 490 error code when you try to install service pack 2 with vista

  I have service pack 1 installed on my computer but I get an error message when you try to install service pack 2

  blztcj,
  Take a look at this article and try the steps inside:
  Troubleshooting Vista Service Pack installation issues

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Service Pack 3. Get the error code 0 x 80240036

  Original title: update

  Download tells me service pack 3 will not install error report 0 x 80240036

  Hi, Corneille,.

  From your problem description, I understand that you can not install Windows XP Service Pack 3 and get an error code 0 x 80240036. I understand the inconvenience.

  (1) you are able to install all other updates successfully?

  (2) how you try to install Service Pack 3? Is it through Windows Update or Stand alone package?

  (3) have you made recent changes to the computer before the show?

  I suggest to perform the steps in the following article and check if it helps.

   

  How to troubleshoot an installation fails in Windows XP Service Pack 3: http://support.Microsoft.com/kb/950718

  Warning to temporarily disable security software: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Reference:--

   

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

   

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Error code 8024200d when you try to install service pack 2 on vista 32-bit

  SP2 and run system update tool update always fails.

  Hello

  **********************************************
  Rename the folder Catroot2 rename the Catroot2 folder (Windows XP and Windows Server 2003 only) and then try to install the program again.

  Note Skip this method if the operating system is Windows 2000.

  To rename the Catroot2 folder, follow these steps:

  1. Click Start , click run , type cmd, and then click OK .
  2. At the command prompt, type the following commands and press ENTER after each line:
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  3. Remove all tmp*.cat to the following folder:
     % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

     If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
  ***********************************************
  Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 /u softpub.dll
     regsvr32 /u wintrust.dll
     regsvr32 /u initpki.dll
     regsvr32 /u dssenh.dll
     regsvr32 /u rsaenh.dll
     regsvr32 /u gpkcsp.dll
     regsvr32 /u sccbase.dll
     regsvr32 /u slbcsp.dll
     regsvr32 /u mssip32.dll
     regsvr32 /u cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  3. Restart your computer.
  4. Click Start , click run , type cmd in the Open box, and then click OK .
  5. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 softpub.dll
     regsvr32 wintrust.dll
     regsvr32 initpki.dll
     regsvr32 dssenh.dll
     regsvr32 rsaenh.dll
     regsvr32 gpkcsp.dll
     regsvr32 sccbase.dll
     regsvr32 slbcsp.dll
     regsvr32 mssip32.dll
     regsvr32 cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.
     Restart the computer.

  ***********************************************
  Remove the hidden %windir%\System32 and its subfolders attribute

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands, pressing ENTER after each line:
     attrib s h % windir %
     attrib s h %windir%\system32
     attrib s h %windir%\system32\catroot2
     output

  ***********************************************
  Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

  To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

  1. Remove all tmp*.cat of the following folders:

     systemroot \system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

     systemroot \system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  2. Delete all the kb*.cat files in the following folders:
     % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
     % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
  3. Remove all the oem *. * files in the % systemroot % \inf folder.
  4. At the command prompt, type the following commands. Press ENTER after each command.
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  5. Restart the installation of the patch failed or the installation of the service pack.

  ***********************************************
  Empty the software distribution folder

  1. Click Start , click run , type services.msc and click OK .

     Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.msc and then click run as administrator .

  2. In the Services (Local) pane, click automatic updates , and then click stop .
  3. Reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

     Note By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. In this place, the drive is a placeholder for the drive where Windows is installed.

  5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6. In the Services (Local) pane, click automatic updates , and then click Start .
  7. Restart the computer, and then run Windows Update again.

  ***********************************************

  It may be useful

• When I try to install Service pack 2, I get an error "WindowsUpdate_80070570."

  Each update else installed to succeslfully, except for the one that says "Update important" which is be Service pack 2 for x 64 system. I tried to update, and I get this error code "WindowsUpdate_80070570"

  I rebooted my computer, cleared out memory... I would really like to fix this ASAP, I bought a video game that requires I have SP2 installed, please someone help me fix this :(

  Thanks in advance :)

  hobodealer,
  Please post with the information requested here: what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Run the System Update tool and then try to install SP2.
  Run System File Checker and test it.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get error code 80042306 when you try to install Service Pack 1 for Vista Business

  Am linking to get my eccentric Vista to work properly. Try to get the notice of failure load and obtaining of the SP.

  alabamacoasty,

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  System File Checker

  The system update tool

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

• Cannot install service pack 1 for Vista

  For almost 2 years, I try to install service pack 1. When installing to part 3 of 3 back changes and is not installed. I called the Vista support almost 10 times, they also helped me online. I've tried everything.
  What can I do?

  How to fix the Windows Vista and Windows Server 2008 service pack installation issues:
  http://support.Microsoft.com/kb/947366

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP1?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code: 0x800F0826 - trying to install service pack 1 for vista

  Error code: 0x800F0826 - trying to install service pack 1 for vista

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I get error Code 80070002 when I try to install Service Pack 1.

  Vista will not be updated to the Service Pack 1 or 2

  I have Vista and have windows automatically updates.  Of course, it is never updated with the Service Pack 1 or 2, and when I go to Windows updates, it says I have no updates available.  Recently I had trouble with my anti-virus software, and they said it was because my computer has not been updated.  I didn't know that I was not common.   However, I get error Code 80070002 when I try to install Service Pack 1, so SP2 cannot be downloaded until I get this one.  I tried everything I could find as an aid, but they were especially when people had problems years ago, when it came out.  What can I do?

  Hi kimber222,

  If these steps are not successful, the next step is and InPlace upgrade. This process is an alternative to reinstalling the operating system. During the process, some of your custom Windows settings may be lost.

  Run a repair installation will restore your current install of Windows to the version of the installtion CD/DVD. You will have to reinstall all the updates that are not included on the CD/DVD.

  Although this process should not damage files and the applications installed on your computer, it is always safe to make sure that you have a recent backup of your data and how to reinstall all software you have installed.

  Fill out the next step for the InPlace upgrade:

  1. Close all open applications.
  2. Insert the Windows Vista CD/DVD intot he computers CD/DVD drive.
  3. In the windows installation program, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exein the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yesto accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

• When you try to install Windows Service pack 3, I get an error code 517.

  Original title: update to Service Pack 3

  When you try to install Windows Service pack 3, I get an error code 517.  What is & how to fix it?

  Hello

  1. where did you get the service pack 3 for windows vista?
  2. which service pack is currently installed on the computer?

  There is no service pack 3 for windows vista. The latest service pack for vista is service pack 2.

  The following articles could be useful.
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

• Need to install Service pack 3 for Vista to download my Zune player

  Just need to install Service pack 3 for Vista to complete my download to my Zune Player...

  Thank you

  LEA Shauna Toenniges

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  As you can see not SP3 for Vista.

  As you can see, the Zune Player requires XP with SP3 not Vista with Service Pack 3.

  Requirements for the Zune Player-

  http://www.Zune.NET/EN-AU/products/LearningCenter/zunesoftware/gettingstarted/pcreqs.htm

  Microsoft Windows 7 (all editions), Windows Vista (all editions), Windows XP with Service Pack 3 (home, professional, Tablet PC, or Media Center Edition 2005 with Rollup Update 2) or Mac OS X with Boot Camp running Windows 7 or Windows Vista.

  If you use a Windows 7 64-bit edition or Windows Vista, please click here to download the Zune software.

  Software Zune will not work on versions of Windows prior to Windows XP SP3, all the versions of 64-bit of Windows XP or any version of Windows Server.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I try to install Service pack 3 on my Windows XP, how do you know if there are other programs running

  I try to install Service pack 3 on my windows XP system when I try to download I have the C:\windows\ssystem32\ntdll.dll message is opened or currently in use by another application you approach other applications & try again, I'm connected only to Microsoft, how know if there are other applications running.

  I hope it's because you just made a new installation of Windows XP?

  Through these two articles:

  • Steps to take before you install Windows XP Service Pack 3
  • Windows XP SP3 - read all the prerequisites for a successful installation

  What I propose is the following...

  1. Go to this web page: How to reset the Windows Update components? and use the FixIt utility in aggressive mode.
  2. Reset.
  3. Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.
  4. Reset.
  5. Double-click the installation file downloaded in step 3 and follow the instructions.

• Error unknown 80070005 error message when tried to install service Pack 2 for vista that someone know what it is

  I tried to install service Pack 2 for vista on toshiba laptop each attempt I get error message80070005 (unknown error) is not on the list of errors does anyone know what this message, or how to correct the problem.

  Hi Cassandra,

  Check if the following might help.

  Updated Windows error 0x80070005 - need a fix? Click here

  See also:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues