Try to install the new update and get the 8007371c error code. What is the solution?

Try to download a new updated Windows and get this error 8007371c code


read this

or please repost your question in the correct windows update forum

Tags: Windows

Similar Questions

  • I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

    Windows recovery disc 32-bit error code meaning version question

    I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

    You don't give any info on what was the original problem with the computer.

    You have set the Bios Setup to boot from the CD/DVD drive?

    At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

    And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

    Use up arrow key to do this, press on enter.

    Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

    See you soon.

    Mick Murphy - Microsoft partner

  • Try to install Windows Vista KB2904266 and it keeps fault - error code 800F0818

    I tried to install the update of Windows Vista KB2904266 for a few weeks now and it keeps failing. Really, it isn't as if it were still able to install anything - 0% installed.  Then I have a 800F0818 code error update failed.  Other updates were installed successfully, but it will not be installed.  I had others fail too in the past.  I do not understand why some updates install successfully while others do not.

    Q: is- KB2904266 theonly update that fails to install or...?
    Re: [Yes]

    Q: do you reside in Morocco, Libya, Fiji Islands or in the mid-Atlantic area (i.e., UTC - 2)?
    Re: [No.]

    Do not hesitate to leave hidden KB2904266.

  • Fresh install of Windows 8 the new SSD and Windows update found 127 updates and they failed with error code 80248007

    I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:

    1 PC is powerful enough with i7 and 16 GB chip.

    2. new SSD this week.

    2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.

    3 Ran install successfully and signed using my Microsoft Account.

    4 tried Windows Store for Windows 8.1, but said I need updates.

    4 Ran Windows Update in Control Panel.

    5. Windows update found 127 updates and they failed with error code 80248007.

    I don't understand how I can get these failures with a new facility.

    Any help will be greatly appreciated. Thank you all in advance!


    Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...

    They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...

  • Windows 7 - trying to install a new update, but get error code 66A

    UH code 66A

    * original title - try to install a new update (update of security for .NET Framework 4) get an error code of 66A, please advise.*

    Please see this thread for answers:

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D207 error code

    I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D error code

    update by downloading the files directly and then apply them:

    pre cc updates:

    CC updates:

    updates CC 2104:

  • My windows will not update, I get a 80072ee2 error code?

    My windows will not update, I get a 80072ee2 error code?

    I run Vista, and I know there have been some problems with updates in the past, would be Vista the reason why I'm getting this error?

    See you soon


    If Windows Update error 80072ee2 during updates, you may need to add the addresses of websites which Windows Update downloads updates to the exceptions to your firewall or 'green list '.

    To add the Windows Update Web sites to a firewall exceptions list

    • Windows Firewall ships with this version of Windows and should already include these sites in the exceptions list. If you are using another firewall, see Help for the software publisher to see how to add these websites to your firewall exceptions list:

      • >

    If the problem persists after these steps, see this>

    UTC/GMT is 15:13 Wednesday, February 1, 2012

  • Can not install windows KB973917 update and getting error code 8000FFF

    I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM.  I can't install the windows KB973917 update and getting error code 8000FFF.  I have tried everything to fix it, but have had no luck.  Someone had the same problem?

    A few suggestions here:

    8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer

  • Wount Windows Update, I get that 80244004 error code

    What is windows update error code 80244004? Tryied updating, but he wouldn't, and I got this message.


    (1) have you made changes on the computer?

    I suggest you to follow the steps and check if it helps.

    Method 1: You can run the system update tool and then try to install the update. Read the following article.
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Method 2: Reset Windows Update components, then check if it helps.
    How to reset the Windows Update components?

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 ( ) how to back up and restore the registry in Windows.

    Method 3: You try to run the System File Checker tool. Check out the following link.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    I hope this helps!
  • I have 8 important windows updates. I tried to install 5 times. I get 646 or error codes, and it has a Try Again tab.

    I have 8 updates important requiring installed via windows update. I tried to install 5 times. I get one or more updates without success. Error codes 646. What this mean and how do I get around it to get the updates installed?

    Thanks for any help.

    1 disconnect from the internet and then try and install updates.

    2. If no joy: -.

    Try to manually download the same and install.
    You can search the individual updates here:

    He just put in the KB number and then perform a search.

    If this still creates a problem, disconnect from the internet and then try to install updates, and another thing you can try is turn off UAC before downloading a first update manually. See: (Guided Help: settings to adjust user account control in Windows 7):

    How to use User Account Control (UAC) in Windows Vista

    TaurArian [MVP] 2005-2010 - Update Services

  • I try to install in Windows update and they fail. He said cannot acess Windows install.

    I tried all the solutions I've seen displayed and nothing has worked.  It was working fine and then 2 weeks ago everything just stopped. I get a code error 80070641 and a code 0641... There must be something out there.  The PATCH program says it fixed and it really didn't.  My System mechanic says he has set and he didn't.  I download a lot just impossible to install anything.

    Here, any help would be greatly appreciated!


    tried this and when I right click on it the registry open in Notepad, and nothing happened.

    So not real - you what to try next.


    NOT continue using System Mechanic until there is a permanent fix of Iolo.

    Contact Iolo ( support

    System Mechanic "cleaning the registry" has put a double whammy on your system in having abducted two registry keys.

    The following will set things in order for the registry {at least for service setup}, so that you can then move on to redo the update of Windows.

    These are for VISTA systems<>

    Download this file from Ramesh S

    Save it to your DESKTOP.

    Extract the contents to your DESKTOP.

    Click Start, type

    REGEDIT and press ENTER key

    from the main menu, select file

    then Select IMPORT

    Access the dialog box (click the icon on the DESKTOP on the left to select)

    type regfix_vista.reg in the file name text box and click on the Open button.

    Once the merger is completed, you will see a confirmation message.

    Click OK when finished.

    Then download this second registry-fix

    Download and SAVE on your system (on the desktop or in a single folder) following the registry-fix file

    Right click on the msiserver.reg file and select MERGE

    Allow him to merge into registry.

    If you are prompted by User Account Control UAC, allow to go forward.

    If and only if the Merge option is not available, and then double-click the file and allow it to merge into the registry.

    IF and file '.reg' appears in REGEDIT, when you are prompted whether to merge answer Yes.

    When finished with two registry patches, leave / close REGEDIT.

    then the costs of closing of session and restart Windows.

    Now try Windows Update again in a new race.

    Only a custom scan.

    Simply select the critical or important updates. (non - select all those in option).

    Let me know if it helps. and if so, please click the Green useful icon to the left.

    If this solves the problem of the installer, please click MARK it on the right.

  • When you try to install an automatic update, I get an error Code 52D. What should I do?

    Error messages


    Welcome to Microsoft Windows 7 Forum!

    You can try the following steps and check whether the problem is resolved.

    This problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and find the number.

    You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

    How to reset the Windows Update components?

    Once the Windows Update components are reset, try to reinstall updates. To do so,

    1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

    2. click on the settings option to change on the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

    3. Select the option check for updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

    4. in the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

    5. you can then download the updates one or both.

    6. click on install updates to install updates currently selected.

    7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

    For more information about installing the windows updates, see

    Install Windows updates

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our Microsoft answers feedback Forumand let us know what you think.

  • Try to install Windows 8.1 and get error message: boot disk cannot be partitioned

    I am trying to reinstall Windows on my Mac 8.1 and get the message error "boot disk cannot be partitioned or restored to a single partition.  I ran across the 'bugs' usual suggested, that I found online with no luck.  Attached are the screenshots that can help.

    How have you managed to get two HDs of recovery on the same disc? You have two versions of OS X installed on this drive in the past?

  • I tried for weeks install windows updates and get this message error (s) found: code 80070645 windows has encountered an unknown error. How can I solve this problem?

    Windows Update
    Error (s) found: code 80070645 windows has encountered an unknown error.
    I had before the shock of two antivirus this proven system restoration started but no help.
    Fix it to charge microsoft, but has not helped any.

    How can we if this problem, so I can install the updates I need?

    Hi Wyattsdaddy,

    Thanks for posting your question.

    Step 1: Check if Windows update-related services are set to automatic and started.

    Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

    Check the above services below:
    (a) Background Intelligent Transfer Service
    (b) cryptographic service
    (c) Windows Update

    Step 2: Rename the Catroot2 folder

    To rename the Catroot2 folder, follow these steps:

    1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
    2. at the command prompt, type the following commands and press ENTER after each line:

    net stop cryptsvc
    Ren %systemroot%\System32\Catroot2 oldcatroot2
    net start cryptsvc

    3 remove all tmp*.cat to the following folder:

    % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

    If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

    Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

    Step 3: Reregister DLL files that are associated with Cryptographic Services

    To register .dll files that are associated with Cryptographic Services, follow these steps:

    1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

    2. at the command prompt, type the following commands and press ENTER after each command:

    regsvr32 /u softpub.dll
    regsvr32 /u wintrust.dll
    regsvr32 /u initpki.dll
    regsvr32 /u dssenh.dll
    regsvr32 /u rsaenh.dll
    regsvr32 /u gpkcsp.dll
    regsvr32 /u sccbase.dll
    regsvr32 /u slbcsp.dll
    regsvr32 /u mssip32.dll
    regsvr32 /u cryptdlg.dll

    regsvr32 softpub.dll
    regsvr32 wintrust.dll
    regsvr32 initpki.dll
    regsvr32 dssenh.dll
    regsvr32 rsaenh.dll
    regsvr32 gpkcsp.dll
    regsvr32 sccbase.dll
    regsvr32 slbcsp.dll
    regsvr32 mssip32.dll
    regsvr32 cryptdlg.dll

    Note: Click OK if prompted.

    Restart the computer.

    Step 4: Empty the software distribution folder

    1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
    2. in the Services (Local) pane, click Automatic updates and then click on stop.
    3. reduce the Services (local) window.
    4. Select all the contents of the Windows distribution folder, and then delete them.

    Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
    5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
    6. in the Services (Local) pane, click Automatic updates, and then click Start.
    7 restart the computer, and then run Windows Update again.

    Item appraised:

    Step 5: Disable the security software
    Note: You can enable it later.
    Step 6: Scan Run SFC
    Please follow the steps below to the auditor of the filesystem as the first steps:

    1. Click Start and type cmd in the box start the search.
    2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
    3. at the command prompt, type Sfc/scannow, and then press ENTER.

    Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

    Step 7: Components to reset Windows Update

    Let us know if that helps.

    Kind regards
    Clement Kumar.

    Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

  • All-in-one Pavilion 23 23-b034: 2 try to install the solution Center HP for printer HP Pavilion has failed. Screenshots

    I had to do a cover of the factory recently. I can print with the HP C7280 programs smoothly. I got this printer and the solution Center works on this pc before the resumption of the plant and another pc before that.  I tried to install my printer HP all One Printer Solution Center now twice with today fails. I hope that the help of screenshots.

    I 1) downloaded a complete new installation - 2) off all antivirus - 3) restarted and restarted the printer HP - 4) the fact that all windows updates have been applied for windows 8.1 - 5) tried after the provided HP solutions but always with failure. Installation all the way to the final "device configuration"... and then expires. Thanks for any help.

    Find thumbs upward, then click on to a KUDO
    Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

    RnrMusicMan: (btw, former musician of Navy for this purpose) I need to send thanks a lot for your answer. I have tried, almost to the point of questioning my sanity, too many times tried too many things and all have failed. Why not go and buy a new printer? Financial considerations. Here's what I've worked with... (finally a good result there, at least the best I know for the moment at the end)

    (1) start here, I have an older HP all C720 printer wireless. I do not think at the moment there is a download of the full version which will allow him to install it in a machine of 8.1. An 8 machine if necessary, but not a 8.1 I do not...? That's what I gathered. Where I made my mistake, so, I was this old horse to battle C7280 installed on my newer HP Pavilion and worked very well with 8.1, (read on before thinking 8.1 work with the C7280) when I say great worked, I mean the Solution Center has worked. Then after a while I improved the Pavilion to 8.1 and everything was fine. A couple of weeks, I had to do a cover of the plant on the HP Pavilion. Instead of installing the software of the printer with the center of solutions right then while he was still an OS 8, I upgraded to 8.1 Loaded my favorite of all the programs and tweaks and tricks. Then I said, I'll install the old workhorse C7280. It would not, not at all, regardless of how many tips I read here, and Googling. Then I tried to install the full version of XP on one of the XP machines. No go. Something I said is prevention. Who could know. I tried to purge the XP what I knew could be related to HP. Shut off all antivirus programs, download fees, etc. etc. ad naseum. I have read and read and tried and failed and failed. You get the drama.

    So, I decided that if I could get it on the Acer Aspire one Netbook I could use as a slave, small sorta Acer server. I barely use the netbook anyway. So I couldn't do. Frustration. So I decided JUST ONE MORE ATTEMPT. And here's what I did for Acer.

    I did a factory restore. No former antivirus autour. Nothing is added. Presitine and already had Service Pack 3 with the resumption of the plant.  What follows I have none to little idea of his touch, but that's what I did.

    (2) I have an old modem that I had used as a slave of my new modem D-Link. I got it, because many of my devices will not work on the new 'n'.  I think, old modem old printer, old BONES. I have set the printer to get the old o SSID of the slave and agreed which has no password. Fortunately, I know anyone personally that could use this wireless slave and they all have their own.

    (3) so once again, I downloaded the full version of XP on the netbook. Extracted, he ran, and so he went the full installation and works.

    That's a lot, but I'm a cheap guy who hates to throw even if old devices, good. I use this Chrome extension called Extension Office remotely in order to get on the netbook from any computer and print using the Solution Center.

    I don't know what I did but I know I've worked. So this is my solution. I'm sure some could find another work around, but probably way above my paygrade.

    Once again, thanks a lot for taking the time. I think I followed your solution several, much too long and did not work. Unless I was always doing something wrong.  My solution was radical but it works for me always try to use these appliances. I just take good care of them and they last. My most recent is the HP Pavilion and it's going on 2 years now.

    Differences or questions please ask. 'Jack :-{D '.

Maybe you are looking for