Try to install the printer HP LaserJet 5if gives errror "operation could not be completed.

Similar Questions

• This is the message I get when I try to install the latest version of DPS App Builder "application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  This is the message I get when I try to install the latest version of DPS App Builder "application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. On my Mac.

  
  

  I tried to uninstall and reinstall

  
  

  Help, please!
  

  What version of Mac OS do you have? I guess it's 10.6.8 which is not supported by the App Builder. You need to update to a newer version of Mac OS.

  Neil

• Try to install the printer HP laserjet 1012

  I just got a new computer with windows 7.  I tried to install my printer HP laserjet printer HP laserjet 1012.  I have the installation disc, but it does not work and the HP site does not list the drivers for this printer.  I'm out of luck, or there at - it a way to install this printer.  t works fine on windows XP

  Users have reported that the Laserjet 1015 driver will work for 32-bit systems with the LJ 1012.  In another forum users reported using the Laserjet 3055 PCL5 the 1012 Laserjet driver in x 64 systems.

• I have trouble to install the printer HP laserjet P2055 on my Windows 7 HP pavilion

  I have trouble to install the printer HP laserjet P2055 on my windows 7 HP pavilion

  original title: installation problem

  Local printers

  To install a printer, the most common method is to connect directly to your computer. This is known as a local printer.

  If your printer is a universal serial (USB) bus model, Windows should automatically detect and install it when you plug it in.

  If it is an older model that connects using the serial or parallel, you may need to install manually.

  To install the printer (add) a local

  1. Click to open devices and printers.

  2. Click Add a printer.

  3. In the Add Printer Wizard, click Add a local printer.

  4. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  5. On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

     • If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional.

     • If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.)

  6. Perform the steps in the wizard and then click Finish.

     Tips

     • You can print a test page to make sure that the printer is working correctly. See print a test page.

     • If you have installed the printer, but it does not work, check the Web site of the manufacturer for troubleshooting driver or updated information.

  My printer does not print.

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  First of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions.

  Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

  Then, try to update the printer driver on your computer. Sometimes printer problems come from out-of-date driver software, and can be solved by installing or reinstalling, the latest driver.

  To find the latest driver for your printer, first check Windows Update, which is designed to detect the hardware connected to your computer and automatically notify you when new drivers are available:

  1. Click to open Windows Update.

  2. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

  3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you do not see a listed updated printer driver, it is always possible that there are: your printer manufacturer might not have provided to Microsoft yet.

  Most printer manufacturers offer updated drivers on the sections of the support of their Web sites. Drivers are typically organized by edition and Windows printing model. When you have found the right driver, install it according to the instructions of the manufacturer. For more information, see update a hardware driver that is not working properly.

  If your printer still does not work, see the support section of the website of the manufacturer of your printer for model-specific troubleshooting tips.

• In XP, when you try to install the printer, get error "the specified port is unknown."

  See the title of the question.

  * original title - when I try to install the printer, I get the message "the specified port is unknown. This happened after cable tv and cable modem has been installed

  Thanks for your help. I am not a comp read and write to do all this.  here goes

  No printer listed. I deleted all.no ports usbxxx or dot4xxx. several others listed.

  Middle neck is the same. Intel

  the RT is Windows 2000 or xp.

  It's what I expected.

  Usbprint.sys figure 54 times more often in documents and settings. also in nt service pack driver PK. Ditto for usbmon.dll.

  This is not the case.

  1. open Windows Explorer and type C:\Windows\system32 into the address bar.
  2. find usbmon.dll
  3. right click on this file. Select properties, and then click the Version tab. Is - this version 5.1.2600.5512?  If not, is what version?
  4. now, go to the C:\Windows\system32\drivers folder
  5. what version is the usbprint.sys file?

  You have a copy of each file in C:\Windows\ServicePackFiles\i386?  If so, what are the versions of these files?

  If the usbprint.sys and usbmon.dll in C:\Windows\ServicePackFiles\i386 files are identical (or older) versions that the corresponding files in C:\Windows\system32 and C:\Windows\system32\drivers, copy the C:\Windows\ServicePackFiles\i386 files into their appropriate folders.  Then restart.

• Print spooler is not working, printers are missing from the printers and faxes, add a printer failed with operation could not be completed

  Hi all
  We have a problem on one of our field of PC:

  • Parts of the printer in printers and faxes are missing.
  • The print spooler service stops.
  • Add Printer failed with the operation could not be completed error

  Have tried the steps:

  1. Restart the print spooler service
     The service could be restarted, but stops again when I tried to do something in the windows printers and fax machines, such as adding a printer, or open the properties of the server.
  2. Follow the steps in Bruce Sanderson Web Windows http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm and http://members.shaw.ca/bsanders/FAQPrinting.htm
     All the steps have been followed, but still could not solve the problem.
  3. Follow the steps in the printer problems in Windows http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
  4. Run sfc/scannow
  5. Run Chkdsk C:/f/v
  6. Run utility HP diagnostic Print as suggested by http://www.theeldergeek.com/forum/index.php?showtopic=17339

  I'm out of ideas.  Someone please suggest what to do about it.

  TIA

  ELL

  Hi all

  Fixed a problem.

  It turns out the key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers must be cleaned too - delete all subkeys (and their values) EXCLUDES the Internet Provider LanMan Print Services and printing keys (and their values).  A reboot is required.

  Hope it will be useful for people who have this problem in the future.

  Thanks for these folks spend their time to respond or read my question.

  See you soon,.
  ELL

• just upgraded to Imac 27 "5K, installed the Software Photoshop cs4, then saving files get 'could not save file currently in use or is still open' how can I remedy?

  just upgraded to Imac 27 "5K, installed the Software Photoshop cs4, then saving files get 'could not save file currently in use or is still open' how can I remedy?

  Check this message: Re: "cannot save (file name) because the file is already in use or left pending."

• The operation could not be completed: access denied

  Hello

  I recently installed Windows 7 Ultimate 32 bit. I'm her as an administrator, there is no other user on this computer, UAC is disabled. I'm trying to terminate the Avira anti-virus program in the Task Manager, but each time he said "the operation could not be completed: access denied»

  How can it be solved? I want to manage my computer completely and the software I use.

  I would check the FAQ Avira as it is this application that blocks your attempts.

• CC bridge continues to stop, says "the operation could not be completed.

  CC bridge continues to stop, says "the operation could not be completed", when I try to select some images.  I click a different folder and locking the bridge

  Hi deankirkland,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• the operation could not be completed error 1035 com.apple.mobilephone

  I have phone 7 and a mistake on putting in place the reception of voice mail

  the operation could not be completed error 1035 com.apple.mobilephone

  Same error message, even tried operation. iPhone 6, iOS 10.0.1

• The action "Watch Me Do" has encountered an error. The operation could not be completed. (OSStatus error - 50.)

  Morning,

  • Material: Apple Macbook Air 13 ", mid-2013. 1.7 GHz Intel Core i7. 8 GB 1600 MHz DDR3. Etc...
  • El Capitan software to. 10.11.2
  • Automator to. 2.6 (419)

  I'm trying to automate downloads via iTunes take place during early in the morning to avoid using bandwidth more expensive. The operation (my apologies if I have the wrong terms, not a tech guy) fails and returns this error:

  The action "Watch Me Do" has encountered an error.

  The operation could not be completed. (OSStatus error - 50.)

  

  Is that what everyone has seen, or to which there is a known solution?

  Concerning

  James

  Watch Me Do is designed to replay the same click of mouse and keyboard events to the same speed.  Think of driving your car to work and record each turn and stop.  Then play each round and down at the same speed.  What to do if while reading the traffic moves a little faster or a little slower?  If you drive the same route to work, you could get a red light at an intersection that you had a green light to yesterday.  "Watch Me" does not know how to deviate from these changes, so he'll just to stop and report an error.  If iTunes launches slower or an event during playback takes longer to achieve because of different background running processes, it will have the same effect.

  Allowing automatic downloads in iTunes and help Automator to activate your device network at a specific time might be a better solution.

• Registration for the web function has stopped working in my copy of photoshop elements 12.  I get this message "the operation could not be completed.  The system cannot find the path specified"reset preferences was not fixed.

  Registration for the web function has stopped working in my copy of photoshop elements 12.  I get this message "the operation could not be completed.  The system cannot find the path specified"reset preferences was not fixed.

  My os is windows 7.  elements of 12 worked fine for several months and then save for web stopped working

• Cannot install the printer Hp laserjet 1020

  Original title: cannot install my printer

  I bougth a new computer with windows 7, I try to install my priter hp laserjet 1020 I have the instalation disk but the computer can not find the driver, so I download the driver from the web page hp, but also the computer cannot read o found when the web site hp say's it

  Hi Michael,
   
  In addition to the suggestion of Palcouk, follow these steps and check if they help.
   
  Step 1:
   
  After you download the drivers from the manufacturer's website, right-click on the Setup file and run as administrator.
   
  Step 2:
   
  Temporarily turn off UAC (User Account Control) and try to install the driver.
   
  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
   
  Drivers download for HP LaserJet 1020 printer
   
  Printer HP LaserJet 1020 (32-bit driver)
  Printer HP LaserJet 1020 (64-bit driver)
   
  Also, be sure to have a look at the installation procedure.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• try to install the printer

  I bought a new Dell laptop and am trying to install my printer Lexmark x 5495 without success. It says installation is not complete in the spooler failed [although it is on auto]. Not being is not technical interest I was not able to completely install the printer.

  Have you downloaded the drivers from the Lexmark Web site? If this isn't the case, please do.

  http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_TW&question=Lexmark+x5495&productCode=LEXMARK_X5495&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X5495&searchid=1268228506210#2

  Unplug the printer, then install the drivers. Connect the printer when prompted to by the installation wizard. MS - MVP - Elephant Boy computers - don't panic!

• When I try to install the Flash update he asks a password that does not close and I can't install

  When I try to install the flash update I get a request a password that is not out to please help

  Hello

  You use Windows or Mac computers?

  If you use a Mac, it's the Mac OS which is asking password and not Adobe Flash Player. Please follow what userid & password I need to install Flash Player?

  -Varun