Try to install Windows Update to Explorer and get the error code 9 48

Similar Questions

• I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE

  • I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE.   THIS HAPPENED SEVERAL WEEKS
  • THANK YOU, MARK SZYMANSKI
    

  Hi Mark,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. is the specific question for the individual or all of the updates?

  2. did you of recent changes made to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Manually install the update from the link below.

   

  Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:

  http://support.Microsoft.com/kb/2761494

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• try to install windows update (kb971737), but I get the error

  whenever I try to install this update I get error 80070020, I tried all (safe mode with network-clean boot-dissabeling antivirus and firewall, manual installation) nothing worked
  My os: win vista ultimate sp2 64-bit
  anti-virus: norton 360 v2 + windows deffender

  Yes, I use ie8 you think if I UPGRDE TO NORTON 360 V3 COULD SOLVE this?

  If you have installed (no upgrade to) N360 2010 v3.0, IE8 would be much more effective for you, but I suspect that this will not to solve the problem you experienced when you try to install KB971737, don't.

  Here's what you could try though:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (for example, navigation; read E-mail; cat download other stuff) until you have completed step #8 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. While N360 is no longer present on the computer, see if you can install KB971737 (and offered security critical updates) now.

  7. now, to do a clean install of N360 2010 (using your product ID, if necessary) & restart: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  8. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When you try to install Windows Service pack 3, I get an error code 517.

  Original title: update to Service Pack 3

  When you try to install Windows Service pack 3, I get an error code 517.  What is & how to fix it?

  Hello

  1. where did you get the service pack 3 for windows vista?
  2. which service pack is currently installed on the computer?

  There is no service pack 3 for windows vista. The latest service pack for vista is service pack 2.

  The following articles could be useful.
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

• How can I fix Windows Update in order to get the error code 80070005, which prevents obtaining updates for Windows from my computer, I stop?

  Icon of the status bar indicates "Windows cannot check the updates.  When I try to manually check for updates, I get the error code 80070005.

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  http://support.Microsoft.com/kb/968003/en-us>

  UTC/GMT is 23:58 Saturday, December 8, 2012

• Windows Services has problems and get the error code 80246008 when I try to update windows

  I have 64 bit Vista Home Premium.  I have disabled UAC for short time (just to stop and restart).  Immediately, Windows Services has problems and my services files seem to suffer (fixit would not fixit).  He could have a latent virus that only suspended in no time I had disabled UAC?  I run the computer as an administrator, which I now realize is a problem.  I have a firewall and protection ESET and had all updates until two days ago, if that's any help.

  Also note: BITS of problems that seem to be linked to the system events to COM + service problem - she won't start - error 230: the pipe state is invalid.

  1. http://support.microsoft.com/kb/956706

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  2. http://support.microsoft.com/kb/910337
  If the fixit does not work in the article, read the article to other troubleshooting suggestions.

  PS - repair tool: http://www.microsoft.com/en-au/download/details.aspx?id=7997 (64-bit)

• try to update my CS5 and get the error Code: U43M1D207

  My web pages seems odd on the phones or tablets.

  It's clear when using a computer, but not the hand that held to design.
  All of the suggestions.

  Tried to update, but get the error U43M1D207 code

  Thank you & have a blessed day.

  Re: U43M1D207 error code

• try to install the update for Windows XP (KB2646524) security and get the error Code: 0 x 80070003. I tried all the troubleshooting I can find but no luck, any ideas?

  XP Home addition running and by train to download a pack of compatibility for excellent 2002. It seems that I need the security update first.

  Hello

  I suggest you try the steps from the link below and check if it helps.

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services: http://support.microsoft.com/kb/910336

  For your reference: You cannot install some programs or updates. http://support.Microsoft.com/kb/822798/

  Hope this information is useful.

• When I try to install windows live 2011 version I get this error code 0 x 80040609, and it will not be upgraded

  It always happens to 97% done then rolls back and nothing is up-to-date, and sound always ask me to upgrade. It's more boring

  Hi wikedanton,

  Access the link below and follow the suggestions provided by Windows Live John D to solve the problem:

  2011 - installation Windows Live Essentials 2011 error code 0 x 80040609

  For further assistance on the Windows Live products, please ask your question in the Windows Live Solution Center.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Need to install KB947821 update but fails and displays the error 9370001 code

  You will need to install KB947821 update but fails and displays the error code 9370001.  Does anyone have a solution?

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB2656374 update failed to install and get the error code 80070020

  Try to install update KB2656374 and get the error code 80070020. How can I fix this please?

  Hello

  1. who is the antivirus installed on the computer program?

  2 have you made any changes to the computer before the show?

   
   

  Perform the steps described in the article:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   
  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  I hope this helps.

• I tried to update my cc and received the error code: A12E1

  I tried to update my cc and received the error code: A12E1

  Hi Samson,.

  Welcome to the community!

  Please perform the following steps:

  (1) restart the computer.

  (2) if the error persists, rename the OOBE in OLD OOBE folder of

  Mac: MAC HD/Library/Application Support/Adobe

  Windows: C:\Program Files (x 86) \Common Files\Adobe and

  C:\Users\ (UserName) \AppData\Local\Adobe

  3) download Creative cloud once more and try to run.

  (4) if it you is still facing a problem then Quit/end the notifier AAM address

  Windows:

  Press Ctrl Alt Del

  Start the Task Manager

  Click on the "processes" tab and check if you have AAMNotifier running

  If Yes, click end task

  Mac:

  Go to Spotlight (magnifying glass at the top right on your screen)

  Type activity monitor

  Press ENTER to open the activity monitor

  Check in activity for AAMNotifier monitor

  Leave this process if you find

  Thank you!

  Ankit

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Vista home prem (KB967723) sp2 security update does not install and get the error code 80073712

  I tried to fire disableing walls, with work, I get all the way to installation and the i get the error code 80073712

  http://support.Microsoft.com/kb/957310

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" "»

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click on Start, type: \setup.exe in the Search box, and then click configuration in the list programs. Then, click install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  See you soon.

  Mick Murphy - Microsoft partner

• try to install the updates and get the error code 606

  I am running windows7

  Do you really mean * 646 *? If so, see: http://support.microsoft.com/kb/2258121

  If not, then open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services run properly

  Otherwise:

  Do you have any other errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.