Try to install Windows XP, I get the message that "acpi.sys is open or being used by another process" and he moved it

Similar Questions

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• Whenever I try to install a program I get a message that a program being installed. Which includes all updates to Windows. How can I fix this problem?

  Whenever I try to install a program I get a message that a program being installed.  Which includes all updates to Windows.  How can I fix this problem?

  Hello
  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• When I try to install a program, I get the message the administrator won't let me do

  Administrator problems

  When I try to install a program, I get the message the administrator won't let me do. It's my computer. I am the administrator and no one else uses my computer. How to go beyond that and install the program, I need?            Allienne

  Hello

  Try right click on the setup.exe from the program - then run as administrator

• I can´t start my cc Photoshop or Lightroom on my mac, I get the message that I need to renew my subscription. my subscription is active and paid.

  I can´t start my cc Photoshop or Lightroom on my mac, I get the message that I need to renew my subscription. my subscription is active and paid.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• C7280 when I try to install from cd, I get the message cannot find 7cS5B3C

  When the cd-rom for c7280 hpdriver instaaling I get the message cannot find

  c;\users\huubs\AppData\local\temp\7cS5B3C\setup\...\setup\block [next illegible]

  And it stops

  Huub

  Hello huubs

  Try the following to "scrub" your machine HP printing software. This should clean your computer so that you can re - install the printer as if it was never installed previously. Sometimes this solves problems with the driver.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  Photosmart C7280 Full Feature software (Windows 7)

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  Photosmart C7280 Full Feature software (Windows 7)

  10. run the download to reinstall the printer

• I try to install windows vista professional, but a message that I need a pilot. Where can I find?

  Need professional driver of hard disk for the installation of vista partition.

  I try to install windows vista professional.

  I want to partition the hard drive; However, it says I need a driver.

  Where can I find this driver?

  I have a dell optiplex 360.

  If you still cannot find a BIOS entries to change, try to create a Partition Wizard bootable CD and use it to create a partition.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  J W Stuart: http://www.pagestart.com

• You try to run startup repair but get the message that it could not detect a problem.

  Original title: start repair.

  I tried to use my installation cd to repair the startup.  Then, I get the message "could not Startup Repair detect a problem.  If you have recently established a legacy to this computer, such as a camera or portable music player, remove it and restart your computer. "But nothing is fixed.
  I use a Toshiba laptop with Vista.

  Hello cats0527,

  From what I could gather, it is not a specific forum for Microsoft Office Accounting 2008.  That being said, you try to open a new thread in the following forum:

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_other?tab=all

  At the very least, they should be able to point you in the right direction.

  Best regards

  Matthew_Ha

• I get the message that adobe InDesign CC 2015 has stopped working. I updated and rebooted and still not be able to get.

  I get the message "Adobe InDesign CC 2015 has stopped working". I updated and rebooted and still impossible to get. Help me!

  Hello

  See the following topics:

  Adobe InDesign CC 2015 has stopped working

  Adobe indesign cc 2015 has stopped working

  Adobe Indesign CC (2015) has stopped working error

  Let us know if you need additional assistance.

  Kind regards

  Shelly

• When you try to use Windows DVD Maker, get the message that Windows has closed this program

  Installed a new software for video (because the creation of windows dvd won't work) and before its opening, it says windows has closed this program... solutions.  And nothing!  It does this too often with internet explore.  Help!  Do I have to change some parameters of security or something?

  * original title - Windows maintains close everything I try to guess

  Hi twilight,

  ·         Do you have what video creation software installed?

  ·         How long have you been experiencing this problem?

  ·         Have you done other recent changes on the computer?

  ·         What is the exact error message/code?

  ·         The problem occurs with the entire application?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Start the computer in safe mode and check if the problem persists.

  If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode

  Step 2: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

  Step 3: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• Try to install Winzip but I get the message "f:\. 1397 invalid driver. "

  Original title: How can I fix - error 1397. f:\ driver invalid?

  How to fix my computer? I am trying to install winzip 15.0 and the following error keeps coming up "1397.Invalid f:\ pilot error." »

  Hi Benfarrugia,

  • When you get the above error message?

  Here are the steps to fix it.

  1. click on Start, click run, type regedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ Explorer\User Shell Folders

  3 in the pane right - see if it's all entries which has a F or any other alphabets not C (your folder OP) modify data of C:\

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

• When I try to activate Windows Vista, I get a message that my key is already used. Why?

  problem with vista windows serial

  I was using original windows appearance has been formatted... after then when I installed again and tried to activate it, it says serial number is already in use. but I HAV formatted and installed windows several times but it has not happened before... then, why is it not activate now?

  If you have installed and activated too many times, this could be the cause of the failure of activation. Try the phone activation.

  How to activate Windows Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Windows Activation by clicking the Start button, right-click computer, clicking Properties, and then clicking

  Activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• Try to update with CC but get the message that I can't get to the Adobe servers?

  Hello

  someone has similar problems. There is no problem with my firewall settings and don't have 150 MB internet connection so no problem with speed. Maybe that's a problem with the Adobe servers.

  Hello

  Please see the following links:

  Re: Impossible to arrive on the Adobe servers, please check the firewall settings and try again

  Solve common problems of activation and deactivation of creative cloud.

  Also, try

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall of your machine, see Windows Firewall enable or disable - Windows help , OS x: about the application firewall - Apple Support
  • Turn off the firewall of the security program installed on the computer Internet.
  • After this sign off cloud creative app connect and disconnect activate Cloud Creative applications
  • Force quit Adobe all activity monitor processes / end of task from Task Manager in the case of windows (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)
  • Launch creative cloud application and sign in.

  Let us know if that helps.

  Kind regards

  Bani

• When I turn on my computer desktop-windows vista - I get the message that Multimedia Keyboard Driver has stopped working.

  How can I fix the error message that reader Multimedia Keyboard stopped working.  My keyboard is a

  0817-gateway model # KB.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  If it works fine in safe mode, and then try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.