Try to make "the file is not found" go away

Similar Questions

• "The file is not found" error message when you try to view recent items list for word and excel files

  Title files: original vista on the recent items list does not open

  When I select a file from my recent items list, I get an error message indicating that the file is not found, but it lists the correct path to the file, and if you go to this path of the file, the file is clearly there.  This happens with word and excel files but not the adobe pdf files.

  Hi GillianMO,

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem persists, I suggest you to send your request in the Forum Office for more specialized help.

  Office Forum

  http://answers.Microsoft.com/en-us/Office/Forum/Excel?page=1

• Whenever I export an image from lightroom, if I try to work on the original again once he said immediately that the file is not found.

  As noted above, immediately after you export an image in a file - if I want to go back to work on this image it just says that the file is not found. I have not changed the name of the file.

  Also, after work on an image in Photoshop and saves a copy to the lightroom folder - I don't find it anywhere. It works if I save on the original image from lightroom, but if I save a copy I can't find it in the file anywhere!

  Hi mayab13,

  How do you export the image from Lightroom, because export image from Lightroom keeps the image in Lightroom.

  Could you please tell me your step by step workflow.

  Kind regards

  Tanuj

• cannot save as # because the file is not found

  Using photoshop elements 11 (updates are current) using window 10 operating system... after installation of the updates of Windows 10 (without a restore point saved... yes I'm a fool)... photoshop began to act up.  On all but the drive root (C :), when I put them in a file jpg for editing and then try to save it with a changed name using the command file save as...) I get the message noted.  It makes no sense since I am trying to rename the file by using the Save as command for a new unique name.  The Save command works fine as long as I don't have to rename the file.  The previously described problem does not happen if I do this using the main C: drive, but it occurs on all the other drives. E:, W:, Z; J: etc.  I can't restore so I went to reinstall photoshop like my only option unless someone has a solution.   Thank you

  Reinstalled Photoshop elements 11 with no changes or improvements to the problem.  I've found a workaround which is a pain in the Azz...

  Whenever I have photoshop edit a JPG image, I always hit "save under" and add an E in the back of the name of the image... it always worked well until recently (as explained above)... to get the message "can not save as # because the file is not found". ""   The workaround works is that a PAIN is to type "E.jpg" instead of just "E"...

• Adobe Acrobat - 'there was an error opening this document. The file is not found.

  Guys,

  I have a virtual layer to Adobe Flash player, with a point of entry to Internet Explorer. Apart from that, we used Thinreg to associate pdf files with a Thinapp copy of the Adobe Acrobat Reader 7 (using the allusers switch). We find that, while trying to open online pdf files, Acrobat Reader load then shows the error "there was an error opening this document. The file is not found. If we save the file and open it works very well.

  I am positive that it is a problem of isolation somewhere in the config layer of Acrobat Reader, but have not been able to track it down. It is probably that the Acorbat layer not looking outside of himself for the temporary internet folder that contains the pdf file that IE has cached?

  Everyone falls on something similar and has a solution?

  Matt

  Try to set the modes of insulation for your temporary folders (%temp%, % internet cache) merged to your package of IE. In addition, in our environment, we put % internet merged cache%/contents.is5. Not sure if it makes a difference.

• Cannot open SCSI device ' devices/vmfs/genscsi / vmhba3:5:0:0 '(scsi3:0): the file is not found. Cannot configure scsi3.

  Cannot open SCSI device ' devices/vmfs/genscsi / vmhba3:5:0:0 '(scsi3:0): the file is not found. Cannot configure scsi3.

  I get this error when you add a new SCSI device to one of my Virtual Machines, the device is a tape drive HP SureStore DAT40. The error occurs when the virtual machine is running, around 60% powerup.

  I tried two types of SCSI cards, a "Adaptec 29160N" & a "Adaptec 29160LP" and two different cables, I get the same error with both. The ESX 3i 3.5.0 host to see two SCSI cards when checking under Configuration and then to storage adapters. When you click the SCSI card in the adapters of ESXi storage options, I see the tape drive listed as vmhba3:5:0 for the band and vmhba3:5:1 for the media changer. This makes me believe that, from the point of view compatibility, everything is good to go.

  When I change the instance of VM to add the tape drive, I select new SCSI device which passes next to select the SCSI device in the options, I see HP - HP and media - bands like peripheral parts possible. I tried a variety of virtual device nodes and they all produce the same error that has been pasted above. When ok is clicked it adds the new SCSI device and a new SCSI Controller 1 using the LSI Logic Controller, I also tried all the options under this menu, 'None', 'Virtual' 'Physical' and I have even changed the Type of controller BusLogic, same results even if I get the error posted above.

  The server in question is a Dell PowerEdge 2850, 2 x 3 GHz CPU, 8 GB of RAM, 300 + GB HD.

  I searched the net and these forums and did not find any post about the error posted above, I have some hair left on my head and I don't know what to do at this point. What is a compatibility issue? I tried to add the SCSI device on another virtual computer on the same ESXi host and it gives me the same error. I know the tape drive, scsi cards, and two scsi cables, I am using all work correctly.

  Any ideas?

  Hello vango333!

  Please try this.

  VMware Infrastructure Client

  1. 'Configuration'-> 'Storage'-> select target storage

  2. Please download * target VM *.vmx

  Edit the vmx file

  1. Edit *.vmx (wordpad, etc...)
     (Front)
     scsi0:1.present = 'true '.
     scsi0:1.DeviceType = "scsi-passthru.
     scsi0:1.filename = ' / vmfs/devices/genscsi / vmhba3:5:0:0. "
     scsi0:1.allowGuestConnectionControl = "false".
     (After)
     scsi0:1.present = 'true '.
     scsi0:1.DeviceType = "scsi-passthru.
                     scsi0:1.filename = ' / vmfs/devices/genscsi / vmhba3:5:0. 
     scsi0:1.allowGuestConnectionControl = "false".

  2. Download * *.vmx

  VMware Infrastructure Client

  ' Power On ' target VM

  It ends in the present.

  Good luck!!

• Age of Empire 3. error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the CAB file ' Disk3C ~ 1.cab '.

  I recently bought Age of Empires 3 and tried to install it.  I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed.  I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode.  Any suggestions?

  Hi void 1337,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also follow the link and check if it solves the problem:

   

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  You can also view the article mentioned below to learn more:

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:

  http://Forum.AgeCommunity.com/

   

  Let us know if that helps.

• PS: Could not complete your request because the file was not found.

  Mac OS X 10.7.5.

  PS CC 2014 2.2.

  Since I've updated my CC of the PS today, I'm unable to open jpg in PS files, even the JPG files that I had no problem opening in PS so far. Whenever I try, I get the following error message:

  "Could not complete your request because the file was not found."

  (I'm able to open PSD files, however.)

  Help someone? Much appreciated!

  Which could result from the 9.5 camera raw update.

  Error: "file not found" when opening JPEG files

• Error: Could not complete your request because the file was not found. Help!

  I've updated Photoshop CC and now if I try to open any file (jpg, psd, etc.), I get an error message: could not complete your request because the file was not found. Files lived on a hard drive, then I moved into the office... still no go. PS I uninstalled and re-installed. Same mistake. Here are the best, I can open the files very well in my old Photoshop 5.1... Any ideas? Working on a Macbook OS X 10.7.5 (really hoping that I don't have not updated to El Capitan)

  Hi banderababe,

  Photoshop CC 2015 is not compatible on Mac OS 10.7.5, however if you only use the version of Photoshop CC, then you can try to reset the preferences of Photoshop back to default values.

  "To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  System requirements:configuration of Photoshop

  Let us know if that helps.

  Kind regards

  Mohit

• Since the update, I can't open a JPEG file: "Could not complete your request because the file was not found."

  My subscription to creative cloud updated Photoshop the other day. My iMac is running 10.8.5. Ever since this update, I can't open a JPEG file and get a message indicating "could not complete your request because the file was not found." I'm sure it's related to the update, but how can I cancel it and get things to normal?  (do not include your email)

  Post edited by: Eugene Fornario title should be brief, but descriptive.  No personal information in post.

  Hello

  Please refer to this article error: 'File not found' when opening JPEG files and try the workaround provided.

  Let us know if that helps.

  Kind regards

  Assani

• Since the last update installed, I can not open my older files.  I get the error message that the file is not found.  Installation remove my old files?

  Since the last update of Adobe Reader XI installed I can shoot to the top of the list of all my files on the SHOW ALL option, but when I try to open my old files, I get the error message that the file is not found.  The update to remove all my old files?  Is there anyway I can locate, then open them?

  You can use Windows or Macintosh to search all PDF files and start to bring together them.

• "the file is not found" after apple update.

  "the file is not found" after apple update.  Before the update, I've drag only the pictures I want to edit iPhoto to lightroom and change them.  However, after I upgraded apple iPhoto photos, there is no connection between my modified pictures and lightroom and I get the above message. I know where the photos are (in the content of the packaging of my iPhoto library).  However, when I try to find photos by clicking on the exclamation mark (on the thumbnail of the photo) which means that the photo can be found, I can't open the iPhoto package content.  does anyone have a solution?

  I recommend that remove you the Photos app entirely.

  File > PlugIn options... > import from iPhoto.

  However. If you want to continue to manage with Photos AND Lightroom, you can create an alias of the Masters record (in the package contents) and place it in a suitable place. Lightroom will be able to see this file in the import dialog box.

  Locate one of the images that is missing and it should be able to locate the others.

• Error message "Could not complete your request because the file is not found" using Photoshop Cs6 (latest)

  I use mac, when I update photoshop cs6 10.0.0 to 10.0.1

  I try to open the photo (jpg), but the photoshop said

  "Could not complete your request because the file was not found."

  After I have try another file type (png, psd design image), is work.

  also I try to uninstall photoshop and install again.

  There always (.. .the file was not found.) problem.

  No one knows what happens to my photoshop?

  Thank you!!!

  Hi all

  1.

  Can you please check if Camera Raw is updated, if not! try to run an update to Camera Raw 9.4 from here: Camera Raw 9.4 now available

  OR

  Camera Raw installation of Adobe Photoshop CC and CS6 program

  2.

  In addition, this could help:

  JPEG marker error invalid when you open images in Adobe Photoshop

  Thank you

• "Cannot save...". "Acces\nom... K:\File because the file is not found.

  I came home from a trip to the beach. Downloaded .jpg photos and started editing them. When I try of "save under" [for example, 100 - 5600.jpg as 100 - 5600.jpg] I get "cannot save...". "Acces\nom... K:\File because the file is not found!" If I try to save it in another format, such as .tif it will track fine. Then, if I try to save as 100-5600 a.tif, it gives me the same thing - "can not save...". "Acces\nom... K:\File because the file is not found!"

  So - any suggestions?

  captreed

  Just saw your screen capture.  Note that the name displayed in the dialog box under account ^ ^ ^ characters in there as your actual path.

  Now, I firmly believe that the special characters are what are causing your problems.

  Rename the different folders in your path to remove these characters and you should be fine.

  -Christmas

• Satellite Pro M10 Hibernate - error message "the file is not found.

  I have the Satellite Pro M10. I have problem in the power of Eve v6.00.04. When I want to activate the Hibernate mode it give a massage: * the file is not found. Please confirm the name of the specified file *.

  I can't use the hibernation mode. I tried to uninstall the Toshiba power saver and install again but the massage even come. If anyone has experienced the same problem and have a solution? Please advice

  When you active hibernating the operating system creates a file named hiberfil.sys in the root of your system drive.
  Of course, this file is missing in your installation.
  You can activate and disable hibernation in the system control-> power options.
  Disable hibernation, restart and enable again. Is there an error message? Maybe your C drive has insufficient free space?
  The size of the hibernation file is different from your main memory size.