Try to set up the ICS using a WIFI dongle on your desktop via a router to other machines

Similar Questions

• I get an "Unable to generate thumbnail" error message when you try to set up the blog using RSS Blog

  error message when you try to install blog using blog rss

  Ok. I managed to remove the two problems at the moment.  Later, I'll try to add the blog.

  Thank you for your help.

• When I try to set up the synchronization and open an account, I get the invalid e-mail when I start typing my e-mail address.

  not valid email appears when I try to set up the synchronization

  Just keep tapping until the e-mail address is typed completely.

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.

• I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

  I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

  Hi evilcrebyc,

  Consult the following Microsoft articles and make sure that all settings are correct.

  How to configure Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/306126

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know

• try to get on the internet with my new dongle a message continues to say that I have security certificate errors

  Dongle doesn't work, get errors certificate on the screen

  Hi I have a pc, and when I try to get on the internet with my new dongle, a message repeat myself that I have security certificate errors, so I can't get on the net to fix and I don't know how to resolve this, the pc was origanally used for a modem by my sister. Does anyone know how to solve this problem.

  Hello

  1. What is the brand and model of the dongle?

  2. have you installed the drivers from the dongle?

  If this is not the case, the same install from the manufacturer's Web site.

  I suggest you to contact or visit the site of the factory to install drivers and check if that helps.

  I hope this helps.

• When I try to set up the live tv watch, he finds and then says cannot detect ir material. What can I do to fix this

  I INSTALLED A "AVERTV HYBRID VOLAR MAX TV TUNER AND MY WINDOWS 7 SHOWS THAT, BUT WHEN I TRY TO SET UP LIVE TV IT SAYS"IR MATERIAL.
  NOT DETECTED... " I HAVE ALSO A REMOTE WINDOWS 7 THAT WORKS, I BOUGHT IT THINKING HE COULD SOLVE MY PROBLEM, BUT IT DID NOT.
  JUST LIKE HOW TO IMPLEMENT HELP WOULD BE MUCH APPRECIATED THANKS

  Hello

  What program do you use to watch TV Online?

  Run the implementation of corner store TV tuner - he made sure that your computer receives a TV signal, and that your TV tuner is connected and configured properly.

  Open the set up TV tuner Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Please visit the links below for more information:

  Set up a TV signal in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-TV-signal-in-Windows-Media-Center

  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows7/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center

  Let us know the result!

• How to set up the project using the settings correct vid

  Hi guys/Steve

  Apple macbook pro, lion

  version on licensees of the 10 elements, IE no trail.

  How can I identify exactly what my new project parameters should be when I want to set up a new project.

  I have a dvd with a number of vob files.

  The vob files play great in vlc on my dvd player.

  If I use the normative action, see screenshot.

  

  When I click on get media, the files are imported.

  When I try to read (after rendering), the first second, they play, they are clear, but then they blurred in a manner similar to the difference between hd on youtube and rate of 240.

  Then I tried setting up the project clearly using incorrect settings. When I insert the video in the timeline, the application tells me it's the wrong setting and I want to automatically change the settings depending on the video, if I say NO, then the video plays without being distorted and blurred, however he jumps because it's the wrong setting.

  If I say YES, then the video plays but plays fuzzy.

  It tells me that the application cannot identify the setting correct video project for this or any other file that I have to insert either of vob or avi.

  Here's a printscreen of the properties of the file, maybe this will help. It will not download here that I'll add to the next channel.

  Thank you very much

  Simon

  Mazel tov!

  Finally found!

  So simple.

  nothing to do with rendering.

  Steve, you deserve a big hug for all your hard work to try to help me and I feel like I owe you a lot of time, however, the solution was so simple and provided by ted smith, on the playback screen right click and change the playback to high quality and the quality is 100% clear.

  Thank you all for your help.

  BTW, who knows how to export an mp3 from a video file?

  Thank you

  Simon

• Why say that I have a wrong e-mail address when I try to set up the synchronization?

  I have an ipod touch. I downloaded the app home of firefox on the device.
  I then tried to synchronize my computer at home.
  When I try to set up a private account with firefox that I go to 'tools', enter "set up a synchronization", and then "create a new account. A window is this "e-mail address." As soon as I start to get into my email, that an "x" appears, followed by "it's a wrong e-mail address. That is what it is?

  Just keep typing until you have entered the full e-mail address.

• Try to set up the network between Windows XP Home edition and Windows Vista Home Premium.

  I had a printer connected to a laptop with window vista home premium that I want to share with my other netbook with Windows xp home.

  two computers connected to a network via a router adsl modem to connect to Internet.

  I put the two WORKING groups on the basis of the same name.

  checked XP network places haven't seen vista pc, I had even impossible windows firewall.

  in Vista PC I put the

  ---> private network location

  ---> all in sharing and discovery are enabled

  I had the two PC but still do not see each other.

  So, what should I do?

  Please help, I don't want to move the printer, nor the computers here and there in order to print something from these two pieces, maybe more with different windows in the future...

  Thank you.

  Kind regards

  Michelle

  Hello

  Maybe this can help.
  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot one

  Re just one example. Your list will focus on how your system is configured.

  ** Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to switch the setting on the server using serverListener in adf 11 g

  Hi all
  
  I want to know how to pass a parameter to say client javascript on the server using serverListener. I know I have to use the AdfCustomEvent.queue (source, "serverListenerOpt",
  {}, false). But do not know what is the structure of the parameter and how to get it back on the bean support.
  
  
  Thank you

  You are on the right track, in fact, the third parameter of the AdfCustomEvent.queue where you can pass parameters to the server. For example

  say you have this on your page jspx

  .............
  
  
  
  

  .............

  Your javascript should look like this:

  myClientLstnr = {function (event)}

  AdfCustomEvent.queue (event.getSource (), "sendToServer",
  ({param1: 'val1', param2: val2}, false);
  }

  Your parameter must be a valid json object.

• Try to set / change the password BIOS admin via the script WMI on ThinkStation D20

  Hello Lenovo Community!

  Start using the WMI Lenovo_SetBiosSetting class on a D20 system.

  If I understand the documentation that there is a limitation on the BIOS password in the past, but I updated to the latest BIOS Rev who support States was added for this feature.

  I use a script that changes the supervisor on computers password successfully thinkpad, but when even to run the script from command line on the D20 system it returns "SUCCESS" however to change the password did not effect!

  I'm using the right parameters are the standard of lenovo

  ' pap, oldpass newpass, ascii, we.

  I thought maybe "pap" is not the correct setting for password Admin on the D20, however the WMI available, posted 2010 guide, does not show otherwise.

  Someone at - it an example script that they can display successfully change the password on a D20 system?

  Please and thx!

  Did you run the SaveSetting script after changing the password?

  You can get the SaveSetting script from the sample scripts D20 located at the following link:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=UM002033

  You can use the script SetAdminPassword from the library of scripts of series E, then a follow-up that with something like what follows before restarting:

  "cscript SaveSetting.vbs" originalpwd, ascii, we.

  Replace 'originalpwd' with all what your existing password was at the time wherever you booted the system.

• Media Center (XP) crashes whenever I try to set up the guide.

  I recently had to re - install WXP MCE and when I go to the installation guide, it crashes as soon as I take my provider each time.  Also, now that I have the signal from the tuner set up, if I try to go to settings, tv guide I'm invited is ongoing I want to continue, or cancel a download

  First you posted a question of Windows XP to a group in Vista

  Why did you have to reinstall, there was an existing problem until you thought that a reinstall would cure? If it was a new installation you also installed the system drivers in the site of PC makers, or the cd drivers. Or you made the mistake of allowing the MSUpdate to install / update the drivers

• HP 8660 hard crash when you try to set up the network

  So, the strangest thing happened to my all-in-One printer, apparently without me even not touching.

  We have changed our ISP and had to spend our routers/wireless modems in our apartment. It is - of course - our printer drop the connection to the network - no surprise.

  So the big weird thing is, when I now try to establish a connection to our new network, our hardcrashes printer and needs a reboot (ie. on / turn off the) to the same function again.

  When it crashes I get a brief error message VERY (less than one second - white letters on a BSOD background), after which all the LED lights on the printer starts flashing and the screen tells me that the printer must be powered on/off voltage.

  The code (I tried to catch in the less-than-per-second duration is shown) is: B8409490

  When the printer is connected by wire (LAN), everything works like a charm. Using the copy function works fine as well. But since a cable solution is exactly what we were looking for, any input as to what the problem could be is greatly appreciated!

  PS:

  I tried to reset the settings and the use of the factory through the hidden «menu factory» reset Problem persists.

  Hi Diojr,

  Thanks for your reply and information!

  I'm sorry to see that you receive the error message when you try to connect to your network. I see the wired connection works fine. I noticed that you have already tried a factory reset and the same problem persists.

  If you haven't already done so, I suggest updating the firmware, and then try to reconnect to your network (wireless).

  Please let me know how it works for you!

  Click this link for downloading the Firmware update, select first your operating system and then download:

  Officejet Pro 8600 Firmware update

  Good luck