Try to update, but that out of failure configuring Windows updates. Restoration of the changes. Do not turn off your computer.

Similar Questions

• Windows 8.1 message 'you could not complete updates, by undoing the changes, do not turn off your computer.

  Greetings,

  I installed updates in my Windows 8.1 partition.  Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours.  I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered.  I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5

  How can I fix this without wiping the Windows partition and lose my software?

  Thank you!

  Have you created a Windows system restore point before the upgrade?

• Default configuration of the windows updates. returning from changes. do not turn off your computer. (Infinite loop)

  Problem:

  • Computer: Lenovo N580
  • Windows 8
  • Reset my computer to factory reset
  • All my files uploaded to the computer
  • Launched about 120 windows updates
  • Now, the computer is stuck on the blue screen with the message that seems to never go "failed windows update Setup. returning from changes. do not turn off your computer"I can't access the login screen or any screen to disable the windows update.
  • I tried the solutions posted by other users with the same problem but without success.
  • Please help me with a solution where I don't have a factory reset because I don't have another copy of all my files!
  • Also, is there a way to access a safe mode on Windows 8? I tried F8 or SHIFT + F8 after starting, but nothing happens. I read a post online where Windows 8 have removed this feature. Is there another way?
  • Help, please! I AM ETERNALLY GRATEFUL!
  • THANKS IN ADVANCE!

  See: http://support2.microsoft.com/kb/949358/en-us (run a system restore)

  Perform the system restore from the recovery of Windows and check.

  (a) once you start your computer by using the Windows DVD or disc repair system, a black screen is displayed with the gray text "press any key to start from the CD or DVD. Press a button on any.

  (b) select the correct time and type keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select System Restore.

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Reference link:

  How to refresh, reset or restore your PC.
  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  If you don't have disc to install Windows or the system repair disc, contact the manufacturer of the computer.

  You can also refer to:

  How to create the installation media for a PC refresh or reset:
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• My computer says updated configuration failure, recovery changes, do not turn off your computer... I left on three days and he said that

  My computer says updated configuration failure, recovery changes, do not turn off your computer... I left over three days, and he said that. Does anyone know how to get that back in Windows so I can use my computer. It is a laptop Windows 8.

  Do a Startup Repair:

  Auto repair - run in Windows 8 - Windows 8 Forums

  Let us know if it is not resolved

• After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

  Visa update problem

  After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

  *************************************************************************************************************************************************

  Turn off your computer by holding the power button for about 20 seconds.
   
  Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
   
  Disable the automatic restart in the event of system failure:
   
  • Click Start
  • Click on Control Panel
  • Click on system and Maintenance link.
  • Click on the system link
  • In the left pane, click Advanced system settings
  • Locate the startup and recovery area, click the settings button.
  • In the startup and recovery window, uncheck the box next to automatically restart.
  • Click OK in the startup and recovery window
  • Click OK in the System Properties window
  • Close the system window
   
  After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
   
  For the sake of space I refer you to the article about how to proceed.
   
  System restore
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
   
  Windows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspx
   
  Please let us know if this solution works for you

  Theresa
  Microsoft Answers Support Engineer

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• "failed to set up the windows updates. returning from changes. do not turn off your computer.

  Hello

  I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
  I have updated with the SW update
  The results of the troubleshooting online are:

  Problems encountered:

  Recent updates - not fixed installation problems

  Search for missing or corrupted - files detected

  Some security settings are missing or have been modified - fixed

  Registration for the service is missing or corrupt - fixed

  Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

  I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
  One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

  Hello

  Thanks for trying to help. Now my computer seems to be up-to-date.
  I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
  I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
  I did IE default web browser I have prob changed when I got to the computer.
  I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
  I ran the reset troubleshooting of Windows with the same result as before is to say:
  Recent updates - not fixed installation problems
  Search for missing or corrupted - files detected
  I think I have restarted my computer at this stage and then tried to update again.
  It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
  Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
  Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
  Thank you.

• Computer frequently interrputs/farm low w/message: "updates - 0 full Setup. Do not turn off your computer.

  Also messages follow: "updates not configured correctly.  Returning changes - do not turn off your computer. »

  Take a look at this article to see if it helps to solve your problem: error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer when you try to install updates for Windows

• Default windows setup updates returning changes do not turn off your computer

  Kindly help me because I'm having this problem default configuration of the windows updates reverting changes do not turn off your computer. It may take a long time before he return to normal. I use windows 8. Assistance is very welcome.

  Thank you

  Please run the Windows Update Troubleshooter:
  Download it from this link.

  Please provide details of any problem it reports as not fixed.

• Default configuration Windows update restore changes do not turn off your computer.

  I'm running 64-bit Windows 8

  Guard saying default configuration of folds by using Windows Update

  Hi Cris,

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to start the computer successfully after following article provided above, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Default configuration updates window to update. returning from changes. do not turn off your computer

  I, too have this problem, however, it's on my new Lenovo Thinkpad 2 and the endless loop is going for 4 1/2 hours. I'm crazy! I only had it for 4 days. Can someone please help?

  Hello

  Welcome to the Microsoft community.

  I understand that you are unable to install the Windows updates and receive an error message.

  This must be due to the corrupted Windows Components update or conflict between third-party applications or external devices.

  I suggest you perform the steps below in the Microsoft Help article:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note:

  1. When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  2. Please do not perform upgrade in-place or reinstalling Windows.

  3. after the boot minimum troubleshooting step, read the sections "How to reset the computer to start normally after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  Hope that it can solve the problem. If the problem persists, please answer us, we will be happy to help you.

  Thank you.

• Error "FAILED TO CONFIGURE UPDATES of SYSYTEM REVENANT of CHANGES DO NOT turn OFF YOUR COMPUTER"

  Respected by all,

  Could someone help me please with the problem. I can't access the windows at all. It has blue screen that says "FAILURE TO CONFIGURE updates SYSYTEM RESTORE CHANGES updated DO NOT turn OFF YOUR COMPUTER" pls help

  You may need to stay on this screen for not more than one hour, if there are serious problems with Windows Update.

  If you can always access your PC after waiting, turn off your PC. Then turn it on, immediately pressing F8 constantly. Once you get a black screen with options, select Safe Mode with the arrow keys and press enter on your keyboard.

  Once Windows finishes loading of files, you can start in safe mode, where you should be able to log on normally. You will notice that the screen resolution has changed, and when you log in, you will see a black desktop computer. This lets you know that you are using safe mode. Once you log on, restart normally.

• AFTER THE DOWNLOAD AND INSTALLATION OF WINDOWS, ILS UPDATES BEGIN TO SET UP, AFTER I READ UPDATES WERE NOT CONFIGURED CORRECTLY. RESTORATION OF THE CHANGES. NOT PUT OFF THE COMPUTER.

  RECENTLY RE INITIALIZED HARD DRIVE.

  You don't say if it goes back to run correctly, or you are caught in a loop.

  Read this info:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem;

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• computer is stuck in a loop saying updates are not configured correctly. Coming back from changes, do not tun off your computer

  I tried to update in safe mode but can not even in safe mode. I don't have a hot spare provided with your computer.

  Hello

  What day did you tried to install? You may be able to see once you are on the desktop.

  Step 1: You can try using the know last good configuration option and check.

  Step 2: Try the methods of troubleshooting provided in the article.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• Windows-configuration updates step 3 0f 3 - do not turn off your computer

  Help please before you take a hammer to the laptop. The update seems to be in a loop and for 3 days I wasn't able to stop or delete it. I turned off, left running for hours on end and tried everything I can think of. How can I erase this. I'm not very good with computers, so maybe it's a simple answer then excuses.

  MB

  some suggestions in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-configuring-updates-stage-3-of-3-0/18b07caf-8749-4834-955c-78e7cd211146

• Windows update failure "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer.

  I try just turn on my computer, and I get a "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer"let it sit and continues just to treat then turn off and back on - only to endlessly repeat the problem.  I can't do anything else that the menu hep access by pressing the F2 key, but I can go anywhere with this option or the other.

  Thank you for your help.

  3Ran

  Hello 3Ran
  Thank you for using Microsoft Vista answers Forum!

  Michael Murphy has provided these steps already; I'll just say it in a different way.

  Because you can't go to your office, I suggest that you start your computer in safe MODE. Next to normal mode, it is a different way to connect to your computer and makes a few changes when the problem.

  HOW TO START YOUR COMPUTER IN SAFE MODE

  1. Restart your computer if it is running.
  2. Press the F8 key after your computer powers initially.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. Up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and press enter.
  6. You should see loading drivers and then Please wait.
  7. You should then be on the Welcome screen.

  Connect to your computer using an account with administrator privileges.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.