try to upgrade to win10 stop at 99%

Similar Questions

• Bootcamp after upgrade went Win10

  Running Win 7 on El Capitan on my MBP 2011 end 17 "for months, then awoke to find that Windows has automatically upgraded to Win10. Everything was very good, but had lost the Bluetooth device. I rebooted to Mac to try sorting this side here and then BCA did not show any current partition of BC.

  Following are the results of TestDisk and gpt

  **************

  Last login: Friday, June 24 at 15:29:19 on ttys000

  John-MacBook-Pro: ~ list of john$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 750,2 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 374.5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 374,8 GB disk0s4

  / dev/disk1 (disk image):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme MB + 48.2 disk1

  1: Apple_HFS Adobe Flash Player I... Disk1s1 of 48.2 MB

  John-MacBook-Pro: ~ list of cs john$ diskutil

  No logical volume group CoreStorage found

  John-MacBook-Pro: ~ Jean$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 750156374016; SectorSize = 512; blocks = 1465149168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: error: wrong card

  See the TPG: could not open device ' / dev/disk0 ': Undefined error: 0

  John-MacBook-Pro: ~ Jean$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 91201/255/63 [1465149168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-731414704] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [731824344-1269544]

  * 04:07 1023 254 63-1023 254 63 [733093888-731131904] HPFS/QNX / TO THE

  John-MacBook-Pro: ~ Jean$

  *******************

  Any help would be greatly appreciated.

  JohnS

  You have a GPT corrupted that the release of the command of TPG watch. Please download Fdisk TPG - https://sourceforge.net/projects/gptfdisk/ - and after the release of

  sudo-l/dev/disk0 Gdisk

• Want to 700-021eo. : 15-one smart card reader will not work or show after upgrade to Win10

  15-one smart card reader worked fine under WIN 8.1 but after that upgrade to Win10 it does not appear in the list of devices. I have tried to find drivers but don't know if it's a unit of HP or Realtek or whatever. Any suggestions?

  Kind regards

  Eyvind

  Hello @Eyka,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have a problem with the smart card reader and wanted to help you!  I see that this problem started after the upgrade of OS Windows 10.

  It seems that there are no Windows 10 drivers available for your product on the HP site.  It seems that Windows 10 drivers can be pushed through Windows Update.  Alternatively, you can try to check this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications

  Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications & iTunes the correct ID is set but not in the settings/iCloud

  Is this a separate id, or you have successfully updated the primary e-mail address on the account? You can disconnect an account iCloud through settings > iCloud > Sign Out, and then log back from the other/updated id to update

  If you have updated the main email address: what to do when you have changed your Apple ID email address or password - Apple support

• When I try to download something, it stops downloading.

  When I try to download something, it stops the download and I can't download anything.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• When you try to upgrade to photos in app store I get this message "the object you requested is not available in the store US." does anyone else have this problem or can you tell me how to find pictures in the app store

  "When you try to upgrade to photos in app store I get this message"the object you requested is not available in the store US."does anyone else have this problem or can you tell me how to find pictures in the app store" someone else meets this.  Is it me or is it pictures?

  Ever photos first? It should have been included when you first update of Yosemite and now El Capitan. I know that iPhotos updates get a message like that, but I didn't know the Photos app with a message with it.

  Update to iPhoto to Photos for OS X - Apple support

• Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help?

  Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help? Appreciate the assistance.

  More details on the iMac you have and how much RAM is installed would certainly contribute to answering your question.

• try to upgrade to the latest firefox I'm 3.6.18 but it says NO updates available

  try to upgrade to the latest firefox I'm 3.6.18 but it says NO updates available

  Maybe it's a week or so before the Firefox 3.6.x Firefox 6 Update is enabled, they are based on what I've seen happen in the past. If you want that Firefox 6 now, download the full installation package and install it.

• OfficeJet 7610: upgrade to Win10, no longer have the option of scanning in the HP software.

  I upgraded to Win10 and had to reinstall my HP software.  Now the HP software shows that the printer.  I don't have the option to scan or fax from the HP software.   Ran the HPDoctor and said msg that some updates have been made to correct the scanner.  Ran the scan test and got a msg that the scanner was not available, but I was able to scan from the software Windows FAX/scan very well.  Help!  I prefer to use the HP software for scanning.

  Hello

  Thank you for using the forum.

  Have your downloaded and installed the full features software?

  Here is the link for your convenience;

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/5153789#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you should be able to print and scan.

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• try to upgrade to xp sp3 get 0x8024400A error number. can't figure out what to do

  Had to reload Windows XP after you install a new hard drive. Now when I try to upgrade to servicepack3 I get the error number

  0X8024400A, WHAT CAN I DO? Help

  Start here:

  http://support.Microsoft.com/kb/836941

  It's a very long article, and you have to work your way through it to find your solution.

• Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

  Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

  Hi, I was wondering if I need different software or?   Tent for upgrade achieve performance more than one old computer.   When I turn on the computer, it starts to initialize, then turns on the blue screen, all new material that was added.   3.6 GHz was also used in the 650's.  Just by looking at the cpu they look the same to me.  Any ideas is better than what I have now.   Dell number is 4QXB451

  This isn't the site for these answers... Try intel.com/support/cpu

  Youre pc requirments are based on the chipset boards, chips intel only run with

  the default CPU.

• Try to upgrade to SP3 SP 2 happens with c:\windows\system32\ntdll.dll

  original title; Try to upgrade to SP3 SP 2 happens with c:\windows\system32\ntdll.dll I closed all programs including Avast and always happens with this note. What can I do else?

  Install Windows XP on the partition, BootCamp by Apple. Initial installation required XP SP2, but now I need to update of bootcamp, but I need to upgrade to SP3 before that I can. So I get above mentioned note program c:\windows\system32\ntdll.dll running where can I find other programs which may be executed I don't physically see in the Task Manager?

  Hello

  Please follow the steps mentioned below and let us know if that helps you.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: You can lose data while eliminating malware.

  Also check if your system has been hijacked:
  http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Step 2: Run System File Checker.

  (a) open command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  (b) type the following command and press ENTER:
  (c) sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Step 3: Download Windows XP SP3 manually Microsoft Web site and save it to your desktop:

  http://www.microsoft.com/downloads/info.aspx?na=41&SrcFamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&SrcDisplayLang=en&u=http%3a%2f%2fdownload.microsoft.com%2fdownload%2fd%2f3%2f0%2fd30e32d8-418a-469d-b600-f32ce3edf42d%2fWindowsXP-KB936929-SP3-x86-ENU.exe

  Disable the security software and implement the system in clean boot. After that, run Service Pack 3 installation by double-clicking on the file that you downloaded.

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353

  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode. Be sure to activate security software after installation and the system.

• When I try to upgrade XP Home to XP Pro I have this message "my current version of windows is higher then the version on the CD.

  I'm trying to upgrade from windows XP home, XP Professional.

  When putting the CD and try to upgrade, I get a message that my current version of windows is higher then the version on the CD. How should I complete my upgrade?

  So I think you should written somewhere "includes Service pack 3" picture:

  http://www.Amazon.co.UK/Windows-XP-Pro-1PK-SP3/DP/B0018RCAD4/ref=pd_sxp_f_i/277-8948393-6826463

  (click on the image to enlarge)

  At the root of the Windows XP Professional with SP3 CD - I see the files:

  WIN51

  WIN51IP

  WIN51IP. SP2

  WIN51IP. PPP

  To root only - the CD Windows XP Professional with SP2 , I see the files:

  WIN51

  WIN51IP

  WIN51IP. SP2

  LC

• Message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file:

  Receive the following message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file?: MSI

  * original title - cannot open files with .msi extension *.

  You try to open this leave a link online? If yes I would like to try and save the MSI on your desktop and then try to open.

• I try to upgrade my old vista laptop to win7, but don't remember the product key for my computer compaq laptop. How can I get this key?

  * Original title: get the product key

  I try to upgrade my old vista laptop to win7, but don't remember the product key for my computer compaq laptop. How can I get this key?

  Hello

  Your question is not very clear to understand.

  If Vista is preinstalled on your laptop, this product key is NOT for Windows 7.

  There is a free upgrade from Vista to Windows 7 years, but that offer expired for a long time.

  How does the Windows 7 upgrade Option?

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your Windows 7 update will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Option of upgrade Windows 7 program runs from June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time of upgrade Option.

  Microsoft sells more than Windows 7, but it does NOT come for free.

  Try Amazon.com, etc.

  ___________________________________________________________

  And if you ask to transfer the license of Windows 7 from a mobile to another laptop:

  You tell us what type of license you have.

  If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  The above applies also to OEM system builders licenses.

  License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ___________________________________________________

  And please read this, you can:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

  @@@@@@@@@@@@@@@@@@@@@@@@@

  If you had a 7 upgrade that you have bought yourself on the HP laptop, use programs Key Finder for the PK:

  http://www.Belarc.com/free_download.html

  https://www.magicaljellybean.com/KeyFinder/

  See you soon.