Try to use IMAQ UAB to follow the Plait point.

Similar Questions

• Everytime I open an email or try to send a new message, following the pop box: DOWNLOAD of FILES you want to save this file?

  Everytime I open an email or try to send a new message, following the pop box: DOWNLOAD of FILES you want to save this file?  I have to click 'Cancel' twice in the order fdor the box go away.

  original title: DOWNLOAD the FILE you want to save this file?  Send error message

  Hi Harold Sokyrka,.

  1. When was the last time it was working fine?
  2. Did you the latest changes on the computer?
  3. Are you using any e-mail program or is it access webmail?

  If you use any e-mail program on your computer, then check and make sure that the default e-mail program is set correctly on the computer.

  How to change the default mail Client

  http://support.Microsoft.com/kb/555566

• Try to use Windows movie maker but the error message

  Hello

  I try to import a file from a folder on my computer .mpg, but it keeps giving me an error message "interface has too many methods to fire events from. What does that mean?

  "... An interface has too many methods to fire events from... "a word geek, which translates as"... you try to use a MPEG-2 file in Movie Maker, and it won't import or work... ". ».

  The simple answer is to stop to try and convert the file to an AVI or WMV file that will work.

  Read all about it at the link below:
  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/
  The left pane of the page expand "source Import movie files ', 'Video', click MPEG.

• Could not find an installation package for the product TrayApp. Try installation using a valid copy of the installation package for TrayApp.msi.

  Yesterday I uninstall a program, the Zynga toolbar and which has not, I lost a google toolbar. I then tried to perform a restore, and that's when I started getting the TrayApp message. Also, I tried to do a restore on my external hard drive device, and that did not help either. The date on the external hard drive was 18/02/2011.

  The google toolbar is active it is not displayed any longer.

  Hello

  "a valid copy of the installation package for TrayApp.msi.

  This is normally a problem with your HP printing software

  Uninstall and reinstall the printer

  and try this

  http://www.ehow.com/how_5269744_remove-trayappmsi.html

  Contact HP support

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

  follow these steps

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• When you try to use Windows DVD Maker, get the message that Windows has closed this program

  Installed a new software for video (because the creation of windows dvd won't work) and before its opening, it says windows has closed this program... solutions.  And nothing!  It does this too often with internet explore.  Help!  Do I have to change some parameters of security or something?

  * original title - Windows maintains close everything I try to guess

  Hi twilight,

  ·         Do you have what video creation software installed?

  ·         How long have you been experiencing this problem?

  ·         Have you done other recent changes on the computer?

  ·         What is the exact error message/code?

  ·         The problem occurs with the entire application?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Start the computer in safe mode and check if the problem persists.

  If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode

  Step 2: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

  Step 3: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• Try to use mapped raw LUNs to the new drive, but it is grayed out.

  I have a volume set up on my SAN for my host Dataserver and when I look at the configuration for the storage card from the host (iSCSI adapter SW) it lists the unit, so I know that he can see it.

  The problem is when I go to the Dataserver VM and try to add a new hard drive, it won't let me select "maps Raw Lun. I missed a step in the development of this device?

  To ensure that this RDM file is pointing to the correct LUN, run:

  vmkfstools q - /vmfs/volumes/.../DATASERVER_VM1_4.vmdk

  Usually you would remove a RDM disk by selecting "remove disc" when you remove it from the virtual machine (this removes only files hard and not the data on the LUN itself). However, it should work just delete the two files - the vocation and the associated descriptor file - browser data store. The data browser store will only show the name of the desctiptor file.

  If you can afford a few outages, power off the virtual computer, re - join the mapping file and then remove it by selecting meanings reported "remove disc"

  André

  PS: No host reboot is required for this action.

• I signed up with my user account as an administrator, but when I try to use my spybot and solve the problems, he said: I can't because I'm not an adminastrtor

  I'm an adminastrator why she continues to say that I am not

  Right click > run as Admin > then analyze with her.

  See you soon.

  Mick Murphy - Microsoft partner

• IMAQ select size of the popup point vi

  Hi all, I'm new here. I hope that can get an answer to my question here as soon as possible

  IMAQ Select Point VI is a Subvi, which displays the image in the specified window and provides a tool to point. Is there a method to control the size of the popup window that display the image?

  Thanks in advance.

  This isn't machine vision forum, but anyway.

  You should be fine with WindSize IMAQ, called before IMAQ Select Point with the same ID of windows:

  

  You can also use WinAPI to resize any window with known title. Quick and dirty, something like this:

  

  Andrey.

• keep getting error code0x8ac70013 when I try to use my webcam with live messenger

  When I try to connect to a webcam conversation I get code0x70013 error... help please

  Hello

  1. is the issue limited only when using webcam with live messenger?
  2. What is the operating system installed on your computer?
  3. are you able to use the webcam with any other application?
  4. don't you make changes to the computer before the show?
  5. What is the brand and model of your Webcam?
  6. the drivers for your Webcam is updated?
  7. what version of Windows Live messenger you are using?

  Please follow the steps below.

  Method 1:

  Run the troubleshooter mentioned in the link below.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  If you have installed McAfee SiteAdvisor by chance this is a known issue.

  Click on the link below.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100601

  I would say also, please contact Windows Live Messenger forums.
  http://windowslivehelp.com/forums.aspx?ProductID=2

• Save to PNG using IMAQ file write file does not save good Gray Scale

  Hi - I have a simple VI which reads a raw U16 file and then try to save the option IMAQ write PNG file (because I want the 16-bit format).

  I defined a custom color table which is just opposite of gray, and this is applied to the image.

  The Image displays properly, but saves the PNG file with non-inverted grayscale.

  U16 RAW file is titled "Martha 1849-02-001-6 - view0000_raw_grey_16bit.raw' and sent to ftp://ftp.ni.com/incoming. "

  How is it and how do we get this working correctly?

  Thank you

  Don

  DonRoth wrote:

  I defined a custom color table which is just opposite of gray, and this is applied to the image.

  No! your custom color table to display the images, not apply to the image.

  In additional, it cannot save the palette as well as the 16-bit image. The pallet can be stored with 8-bit 'indexed' image.

  What you can do - if you need just reverse gray, use IMAQ opposite to calculate the negative value of an image.

  Andrey.

• RoboHelp 8 crashes when you try to use an open dialog box

  The title says pretty much all this. RoboHelp freezes when I try to use Open... of the start screen or file > open or any other control that accesses the dialog box open (i.e., open/Explorer button on the settings tab of content in the settings of FrameMaker Document dialog box). I have to finish the process in the Task Manager, and then restart RoboHelp. (Fortunately, the recent projects links work - except to open them..., of course.)

  I discovered this when I had to restore links to displaced FrameMaker documents. My installation is TCS2 running Windows 7 32-bit; all all components TCS2 and Windows 7 updates have been installed.

  I tried a Reinstall RoboHelp on-site, but that made no difference.

  Any ideas?

  Thank you

  John

  Maybe that something went crazy and he thinks that you have several screens, and open your dialogs out of the screen?

  Select file > open, and then do the following:

  Press Alt + space + M, then an arrow key.

  Waggle, the mouse wildly until the dialog box is displayed on the screen, then left click on the mouse to drag where you want.

  (I assume that it will continue to operate under Windows 7, but don't have this version to try it).

  If you encounter any problems with your dialog boxes, I think that you would have access to each dialog box and repeat to get them all in the right place. Even if I remember something about a registry hack - I don't know if that affects all the boxes of dialogue or just a / a. I think it's Rick who posted originally, so it could hold and be able to answer this question.

  Amebr

• Follow the wire at the edge of images

  Hi all

  I have tried this, but couldn't find an answer.

  I need to do a removal of CC Simple wire on a piece of film and I would like to be able to follow the two points of the wire. The point where the wire is attached to the object is in the frame and easy to follow, but I need to know how to follow the point of intersection of the wire on the edge of the screen. The tracker doesn't seem to be able to understand that I want only it lock onto the edge of the image.

  Any help appreciated.

  Thank you.

  The tracker doesn't seem to be able to understand that I want only it lock onto the edge of the image.

  Should not, because it is strictly operates on images and does not care about the edges of the computer or whatever. However, it takes cheating forward to compose your work to a larger model in which a contrasting solid is under your other videos so there is a visible edge. Then the demo can be used as a layer and followed. When done right, you should be able to use the copy & paste keyframes to get your positions and use it on a simplified version of the layer. Otherwise you can of course always 'crop' in advance dial again to a model of appropriate size.

  Mylenium

• Is BlackBerry Smartphones gps does not follow the map

  Guys good day. Help, please.

  My problem is with the GPS. When I put in the address and ask to 'navigate here.

  I can see the arrow moves but the card is not mopve as well so I have to constantly move the map manually.

  It was only after I updated from version 5 to version 6.

  Thanks for the comments.

  Edin

  Sorry, I can't help, but I can sympathize with you because I was looking for a solution to this as well.  I just bought this new Bold 9650 y / day, in lieu of my Pearl 8230, that somehow the GPS got fried, stop working, whatever, with a sort of update that was pushed to the phone.  Weird situation, look in the area of Pearl for more details if you're curious.

  Anyway, it used to work perfectly on the Pearl - point fixed GPS and card installs under him.  Seems I got on a bad deal here because my OS is the new 6.  I hope that someone will know about a fix for this.  A bit useless if you have to scroll to get to your location all the time, as it is constantly going off the screen!  :-(

• How to set the starting point of a variable width profile anchor point?

  Hello

  I have a square with a dotted on her. I can't be a variable race, so I loaded 'Width profile 2' in the profiles. The problem I'm having, is that Illustrator uses by default to start the biggest points in the lower right corner, and I would like the "starting point" to be in the middle of the line, if you know what I mean. I'm always happy for the dotted lines start big, then gradually decrease in size, but I want to control where is the "beginning".

  I have attached pictures to show what I'm working with.

  Thanks in advance!

  Morgane.

  

  

  

  Genius! You reminded me of a quote from Khalil Gibran.

  What is obvious is that who has never seen until that someone expresses it all simply.

  Thank you.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.