try to write files to CD to be read by windows 98 using Windows 7

Similar Questions

• When I try to copy files to a CD, I get message "Windows has a problem to copy this file to a CD." How to fix? I get the same message that I click on "Copy to CD" or drag the file to copy to the CD player.

  When I try to copy files to a CD, I get the message "Windows has encountered a problem when trying to copy this file."  I press the button "Retry" without any result.  I get the same message that I have click on 'Copy' files on a CD or drag the files to copy to the CD player.  I was able to copy these same files to a CD a few days ago.  Thanks for the suggestions.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  1. don't you get an error code along with this error message?
  2. what CD burning software is installed on your computer?
  3. what kind of CD do you use to burn?
  4. What is the status of the CD - DVD drive in Device Manager?

  Method 1.
  Let us first check the status of the optical drive in the Device Manager. Check if there is no error code or yellow mark is listed.
  Reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional
  http://support.Microsoft.com/kb/310123

  Method 2.
  If the problem is to start the computer in a clean boot state and check if you are able to accomplish this task.
  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem opening pdf files.  I have Acrobat Reader DC/Windows by default, but when I click on the file, a file conversion screen with all these codes. Must use the "open with" function which is a nuisance.  Why it will not default?

  Problem opening pdf files.  I have Acrobat DC/Windows by default, but when I click on the file, a file conversion screen now with all these language codes. Must use the "open with" function which is a nuisance.

  Why it will not open by default when I click on the file?

  Hello

  I guess that you are looking for this:

  Open drive

  Go in Edition > Preferences > General

  Uncheck the option, the online storage see the opening of the files

  Click OK and restart

  Thank you

  Abhishek

• fwrite error: try to write 26 bytes of file and the problems

  I'm writing 26 Hex bytes data file using fwrite and I have unknown problems because of which has written 27 bytes

  /////////////////////////////////// Code ///////////////////////////////////////////////////////////////////
  FILE * READ;
  READ = fopen ("DataReceived.dat", 'w'); opening the file for writing

  unsigned char data2send [26] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
          
  data2send [0] = 0xEB; conferment of the data
          
  data2send [1] = 0 x 90; conferment of the data

  data2send [10] = 0x08; / / data assignment
           
  crcsent = calCRC16 (data2send, 24); calculation of 24 bytes CRC and the addition of crc (16 bit) to last two bytes of data
          
  data2send [24] =(crcsent>>8) & 0xFF; Added to the second last octet CRC
          
  data2send [25] = (crcsent & 0xFF);   CRC has added up to the last byte
         
  If (ComWrt (coms, data2send, 26) == 26) / / send data to com port
  {
               
  fwrite (data2send, 1, 26, READ); ===> writing data in the file where there is problem
      
  }
  /////////////////////////////////////////////////////////////////////////////////////////////////////////////

  Production (WRITTEN in the file) should be:

  0xEB 0 X 90 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 x 00 0x0A 0xA1

  Output that I get the file (which is incorrect) and do not do because I've specified 26 bytes to write

  0xEB 0 x 90 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 x 00 0x0D 0x0A 0xA1

  How 0x0D is added to my data, even though I'm only add data Byte 0,1,10,24,25

  When I write 26 bytes then how 27 bytes are written to the file?

  Thanks in advance

  arfaoui

  I can only imagine that the problem may arise from opening the file in text mode and write on it (0x0A) a line break character: the system can automatically add a CR (0x0D) in order to maintain the standard CRLF. Try opening the file in binary mode instead (fopen with "wb" specification).

• Whenever I try to delete files from my USB, the message saying that you can not delete the file, the disk is write protected

  original title: write protection

  Whenever I try to delete files from my USB, the message saying that you can not delete the file, the disc is write protected is displayed. What I can do to undo the write protection?

  Try this
  Go to disk management in administrative tools of the control by just one panel right click on the icon my computer on the desktop and select manage and then try to format your USB

  OR

  Try this
  http://www.ehow.com/how_5187399_format-write-protected-disk.html

• When we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thank you

  When we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thank you

  Hi, I found the problem, it seems that the pdf file uses a helvetica font, and when we write in a part of the PDF with the Danish letters A, Æ, O, it changes signs. I changed the Roman fonts in adobe acrobat pro, and then there's no problem. But he seem´s that the standard in pdf files is helvetica, and there is not time to change the files, because we get only the files on the day of the exams at school. It happens in all versions of adobe 11 and DC, it is also a problem on Windows 7, 8.1 and windows 10 more Macbook.

  Kind regards

  Med Hotel hilsen

  Price Patrick Simon

  TI-Vejleder

  Langeskov Skole

  Ronningevej 38

  Langeskov 5550

  Denmark

  FRA: meenakshin83966505 [email protected]<>[email protected]>

  SVAR til: "[email protected]<>[email protected]> ' [email protected]<>[email protected]>" "

  Dato: måndag den 18. January 2016 kl. 14.39

  Til: Simon Price [email protected]<>[email protected]>

  Emne: You have been mentioned by meenakshin83966505 in Re: when we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thanks to the Adobe community

  You talked

  by meenakshin83966505https://forums.adobe.com/people/meenakshin83966505?et=notification.mention> in Re: when we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thanks to Adobe Community - see the reference from meenakshin83966505 to youhttps://forums.adobe.com/message/8402116?et=notification.mention#8402116>

• I try to download my master CS6 on a new hard drive because my old one was crushed and I get a message saying "unable to write file" or "I have not authorized to access the requested resource."? What does that mean?

  I try to download my master CS6 on a new hard drive because my old one was crushed and I get a message saying "unable to write file" or "I have not authorized to access the requested resource."? What does that mean?

  It was a matter of software support. Thank you! Figured it out.

• read and write files in a new file binary u16

  Hi all

  a very simple thing that I do not seem able to understand. I have a file containing the 1024octets of unsigned 16-bit words. I can read it successfully with the good value displayed. But then I try to write these values to a new file, I can read is no longer the same value (in fact it is all grayed out 0) in the newly written file. The newly written file has the correct size of 1024 bytes, but I don't seem to get the right information. I made the endian are the same, little-endian.

  Attached is my basic VI, and the .dat file is the file containing the binary information.

  I do not use copy file because once I get this figure out, I'll need to add more file Scan.dat in a single file.

  Thank you!

  I would put some time between the writing and reading.  It may be a good idea, in fact close the file between the two.

  I have a feeling that you not could enough time to actually have the written file before read you.  That or, as it is still open, the file pointer is at the end of the file and you try to read all bytes from the end, which means that you get nothing.

  Not sure of the exact number, but these two things come to mind.

• Not able to write files to CD or DVD

  I'm not able to write files to CD or DVD. When I go to DVD - RAM (d :)) properties, I see only the following titles: general, AutoPlay, material and sharing.) I used to see a record position, but now he isn't. How do I restore to open and activate the recording function? I use Windows XP Home Edition with Service Pack 3. Drive: HL-DT-ST DVDRAM GMA - 4082N. Please advice. Thank you.

  Hi mark,

  · You receive an error message or error code when you try to burn a CD/DVD?

  · Do you remember recent changes made to your computer before the show?

  I suggest you to run the troubleshooter from the link below: your CD or DVD cannot read or write media:http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

  You can also check the links below: CD - R or CD - RW drive is not recognized as a recordable device:http://support.microsoft.com/kb/316529

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD:http://support.microsoft.com/kb/321641/

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot write files e200v2

  I have a Sansa e200v2. I run a computer-Sidux linux with KDE 4 as window manager. When I try to copy files by drag and drop, I get an error message indicating that it cannot create folders. When I try and copy individual songs, he says it cannot write to the disk. Before this started, I copy music on the drive and hit eject and unplugged, thinking about its deletion. So I'm sure I caused damage. I was wondering if I could solve this problem of formatting and then reinstall the drivers. If Yes, where can I find them and how to properly install them? Again, I use the window, and I don't know much about linux. Please help me.

  Result not screwed, but you'll have to dive into Linux a little.

  Go to settings/USB Mode and put the device in MSC mode. This in fact act like any other USB thumb drive. Your Linux support a USB? These are the drivers, you need to find.

  The other mode, MTP, is one that works with Windows Media Player. You may have switched to that, and it probably won't work with Linux.

• Error: "Windows could not complete the format" when you try to write to blank DVDs

  I get this error when you try to copy files to a blank DVD.  I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message.  Then the drive no longer recognizes blank dvd inside.  I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata.  I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved.  I think that the report mentioned that the reader could recognize not writable or something to that extent.  The player can play DVDs fine, however.  Is there a solution to this problem by replacing the dvd ram drive?

  Hello

  Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
  speed or mastered format. Have you added any burning new software lately - these tend to compete
  for resources and can interfere with each other.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  ====================================

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you can write on the outside edge.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Move to the new computer, get "an error has occurred during playback of files or write files to a disk." The disc

  • I tried to move my catalog and PE6 install to a new computer.  This is on a Dell Windows XP machine, and I moved it to a Toshiba Windows 7 (64-bit) machine.  I always kept my photo on an external hard drive files.  My library is 50 GB, 10,000 files.  Here's what I did.
    • Copied the original PE6 installation file on the Toshiba.  Installed but not activate it.
    • Copied my catalog folder to the location of the Windows 7.
    • Plug the external drive into the Toshiba.  So makes that same letter drive as a front.
    • Fired up to PE6 on Toshiba.  Seemed fine in the Organizer.  Everything seemed to be there, but I didn't try to make any changes at this time there.
    • PE6 disabled on the Dell.  Enabled on the Toshiba.
  • Then I realized that it is not fair.  I can edit the keywords and the stars rating on photos, but not the dates, legends or notes.  I get "an error has occurred during playback of files or write files to a disk." The drive is may be full, or there may be problems with the source media. »
  • Only a fraction of the external drive is in use.
  • I can access the files on the external hard drive with another application (Windows Photo Viewer).
  • I tried the reconnect All missing files.  Somewhat ambiguous, she said "There are no files to reconnect."
  • In the properties in the organizer for each photo are the appropriate file names and paths.  Folder view works fine in the Organizer.
  • I can put new files in the directories of the same external drive, import them into PE6, then change them normally.

  What is the best way to get Organizer connected correctly to my files?  I guess I could import all photos on the new machine, but I guess I'd lose some of my metadata.  So it's out of the question.

  Thank you

  Bill

  Well, the recommended method for moving the catalog is to use organizer of the PSE6 on your old computer to do a full backup on your DHM.  (Which backs up the catalog and media files).  Then, on your new computer, open the Organizer PSE6 and restore from this backup.

  Your method seems logical, but...

  Ken

• When I try to attach files in hotmail, I get a message that silverlight plugin crashed and error report error on plugin - container.exe. I have the latest silverlight plugin. What should do?

  • I work on windows XP

  I have latest fire fox and silver light plugin

  • 'Silver plugin light crashed', that's what I get when I try to attach files in hotmail
  • error report on plugin - container.exe.
  • where to find the plugin - container.exe. to install and try

  Hello

  Please also try to disable the Silverlight Add-on in Tools (Alt + T) > Add-on > Plugins before you open Hotmail. You may still be able to attach files.

• Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the line: sudo etc. but it works. Any id

  Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the next line: "sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/NameOfYourUSB--applicationpath/Applications/Install\ OS\ El\ Capitan .app X\ X\ - nointeraction", but it says: "command not found" no idea how to do it correctly. I think I'm missing what Installer applications...

  When you have completed the installation of El Capitan, the Setup program deletes itself. So if you have not copied somewhere else, you will have again the download on the App Store.

• File access denied @ IMAQ write file 2

  Hello

  I started a project using the Vision Development Module and I'm stuck in the templates backup in a folder.

  I have tried many other 'methods' using the same Imaq write file 2 and all have the same error...

  Below is a basic example.

  Maybe someone can provide a correct solutions or give me an idea on what might be wrong.

  I'm losing my mind soon

  PS: I gave full control access to all users...

  Thanks in advance!

  

  Hello

  'build path' feature to add the name to the model. You can do this in several ways (as a constant, dynamically, etc...).

  An example of the use of a constant is illustrated below:

  

  Best regards

  K