Trying to access the Archives of emails to a version of thunderbird 2006

I have some old email with the information that I need to access. I have saved on the disk, but they have not used in years. Now, I need to try to access the files. The external file is named "mail" and 3 subfolders named 'local folders' and then two appointed by servers pop they were associated.

In the files, I have files named Inbox (without file extension) and inbox.msf. Files without extensions seem to contain all data.

I can't import these messages into the current version of thunderbird. Any ideas on how I might be able to access old emails?

Thanks... it's a little tricky, so in case anyone has the same problems on the line: you must use "import a mbox file" (which seemed to me would work for an .mbox file extension). It worked.

Thank you!

Tags: Thunderbird

Similar Questions

  • five out of six times (approximately) to start outlook express 6, it crashes while trying to access the first message

    five out of six times (approximately) to start outlook express 6, it crashes while trying to access the first message. This happens several times, and each time the first message (even) appears in the Inbox, even if the process is not complete. sometimes clear the cache, or cleaning IE temp. the files seems to help - but not always.

    It's VERY frustrating!

    Do a household.
     
    1: do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
     
    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095
     
    2: after you're done, followed by compacting your folders manually while working * off * and do it often.
     
    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
     
    3: disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3
     
    For some programs, turning it off is not enough. You may need to uninstall and reinstall in custom Mode and remove the analysis when e-mail messages.
  • Trying to access the electronic books in the library of our audience. Downloaded the software, but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.

    Trying to access the electronic books in the library of our audience. Downloaded the software, (Overdrive Media Console) but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.5.0.1. How to do only what I can read ebooks? People have suggested using IE, but I prefer to much HELP Firefox!

    Try to update the media player while using Internet Explorer. Windows Updates site uses ActiveX to perform "duties. Firefox does not support ActiveX.

  • Journ.E touch - blank page while trying to access the virtual store

    After resetting the account and update the virtual store.
    I get a blank page while trying to access the online store.

    I went to update firmaware. always blank page.

    Hello

    Try to do a RESET on Journ.e
    Use a pointed object, like a pen, drag the left reset button first, then right and press in and hold the power button for about 2 seconds light up your DAY. E TOUCH.

  • I am trying to access the security settings in my Apple ID, but due to too many attempts to answer my questions of security, this option is blocked. How can I unlock it?

    I am trying to access the security settings in my Apple ID, but due to too many failed attempts to answer my questions of security, this option is blocked. How can I unlock it?

    You can see this page if your identifier Apple is locked to see how to solve this problem.

    https://support.Apple.com/en-us/HT204106

    If you cannot solve this way, please contact support at the link below!

    https://getsupport.Apple.com/

  • I have an error was encountered trying to access the battery

    I have an error was encountered trying to access the battery

    Hello

    There seems to be several users facing this problem with HP laptops.

    If you use an HP laptop, please see the following thread.

    an error occurred trying to access the battery - Microsoft Answers:
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/an-error-was-encountered-trying-to-access-the/5c4f34b5-9f8e-4509-9560-96e60720e24e

    Let us know if that helps.

    Concerning

  • Trying to access the website of DNSchanger for desire but I keep get explore cannot connect.

    Question of dooesday DNSC

    trying to access the website of DNSchanger of desire but I keep getting explore cannot connect a does that mean I'm infected

    Hello

    If you run MSE or an other major antivirus programs, so you have protection.

    The site is probably just delayed due to heavy access.

    Check this thread:

    http://answers.Microsoft.com/en-us/protect/Forum/protect_start/DNS-changer-virus/88be0bb0-da0f-4688-97fe-6089e637c5a4

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Trying to access the camera Pentax Optio S, getting a "the drivers for this device are not installed. (Code 28) »

    Trying to access the photos that are on my camera, not on my drive of camera memory.

    Hello

    1. what operating system do you use?

    2 did you change on your computer?

    I suggest you to follow the links and check out them.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    If you use windows7, I suggest you follow the link and check. Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Device Manager error code 28: Troubleshooting

    http://support.Microsoft.com/kb/310123

    Note: Applicable to Windows 7

  • I'm trying to access the functions tells me windows explore stopped workingI

    original title: Explore Windows crash

    Unable to access any windows especially update function, which is where I am responsible for the problem. I'm trying to access the functions tells me windows Explorer has stopped working

    Hello

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Application module tries to access the secure API

    Hi all.

    We are new to Blackberry Java development and have some problems with it.

    We use the same BlackBerry Bold 9000 and OS worm Simulator. 5.0 in Eclipse JDE.

    The JDE version is 5.0.0

    We signed HelloWorldDemo with tool of power, provided by BB. It worked fine on the Simulator AND the device.

    Then we signed our own application, based on PictureScrollFieldDemo.

    The thing is, on the simulator of OUR application works fine, but when we try to run on the device, it failed with an error that says something like this: "Application module tries to access the secure API."

    After that many times we tried to remove the code all potentially dangerous and recompile the application. After that it stopped working at all (when you click on the application menu, ABSOLUTELY nothing happens).

    Then, we decided to try to launch PictureScrollFieldDemo, the sample provided by BlackBerry. Also, it did not work

    Finally, the HelloWorldDemo has stopped working or the other...

    During all this madness, we rebooted the unit several times.

    Please help, appreciate any advice.

    Thanks in advance, geezmo.

    You should have received 3 keys, RBB, CPR and RRT. You imported all 3 when you have been setting up the signature tool?

  • application trying to access the api blocked

    Hello

    IAM trying to run my app on my phone, it works fine on the Simulator. When I run it on my phone it gives me an error saying "application is trying to access the api secure."
    Thanks in advance

    You must sign your application if you want to run it on a real device.

    You can find more on signature here:

    https://developer.BlackBerry.com/Java/documentation/code_signing_1977871_11.html

    If you search the forum, you will find that this problem has affected other people, for example here:

    http://supportforums.BlackBerry.com/T5/Java-development/app-trying-to-access-a-secure-API/m-p/189075...

  • Blocked ConnectionFactory: trying to access the api.

    Problem:

    1. my application uses the ConnectionFactory class for 5.0.x and 6.0.x platforms.

    2. one of the testers reported that the Bold 9700 v5.0.0.169 (Platform 5.1.0.30), it cannot start application. Shows applications message " Application trying to access the api blocked ' where is the name of the application. Also, Tester reported that the previous version of application (where ConnectionFactory served) starts correctly.

    3. I'm sure asking signed correctly, because I was able to install it on several Bold 9700 DeviceAnywhere devices. The only difference I found is that these devices have v5.0.0.174 (Platform 5.1.0.146).

    Can anyone confirm that this is a bug in the previous OS 5.0.x? Is it okay for me to suggest the update of the device to the customer?

    How the application has been installed?  If they use the WAP browser, read on...

    The JAD file used during the download of applications using the Explorer lists the COD file sizes.  These are the sizes previously signed, which tools do not update after signatures have been applied.  In most cases, this won't matter, but some WAP Gateways carrier truncates the COD file based on the size specified in the JAD file, which cuts the signatures for the application.

  • Help - LI running, but get Apache2 Ubuntu default page while trying to access the Web interface of log insight

    Hello

    I installed the Log Insight 2.5 VM via vCenter Server ESXi 5, 5. I was able to deploy the virtual computer successfully and you can see the network through VAPP Options settings. (Attached picture - TIME settings).

    Question:

    Unable to access LI web Interface. While trying to access the Web interface, I get 'Apache2 Ubuntu by default Page' (img attachment). Insight of the newspaper runs and opens the web application on port 80.

    Newspapers, controlled far-

    status of /etc/init.d/loginsight

    Open a session running Insight

    Attached image Loginsight2-DURATION - file /storage/core/loginsight/var/runtime.log

    # sh li - cassandra.sh - status

    SH: li-cassandra-sh: not found

    Check if the tcp 80 port is open through the netstat command. Yes, it is open.

    Telnet on port 80, it says connection and crashes. Image attached - telnet-LI

    Able to ping the IP address successfully.

    How can I check http logs on console LI?

    I would really appreciate response to this soon. I'm working on installation LI for more than a week and struggling to get through this way.

    Thank you

    Radhika

    I believe that you with the configuration, but I tell you that the configured IP address and the IP you hit in your browser are not still the same IP, Log Insight does not work on Ubuntu, so you hit another system. To prove this, connect you to the console of the Insight newspaper and run:

    # cat/etc/SuSE - release

    SUSE Linux Enterprise Server 11 (x86_64)

    VERSION = 11

    PATCHLEVEL = 2

    You will see that you are running SuSE to see a Ubuntu screen tells me that you have an IP address duplicate in your environment and you hit a node that is not an Insight newspaper. I hope this helps!

  • an error occurred while trying to access the server

    an error occurred while trying to access the server, I get this message when you try to convert, what's the problem, the user of windows 7

    Hi Laura,

    It looks like you can try to access one of the services of Adobe Document Cloud in Adobe Reader. If so, please close the session, and then reconnect.

    If you're still having problems, please try to connect via the web interface at https://cloud.acrobat.com.

    Let us know how it goes!

    Best,

    Sara

  • an error occurred trying to access the service

    I wonder why I bought a year subscription to Adobe Reader to convert PDF files to Doc files, when it WORKS and no one seems to be able to help me! I'm on a Mac Book Pro with Yosemite (do not upgrade it slows down your Mac evil) and whenever I try to convert a pdf file to a doc I get "an error has occurred while trying to access the service", can someone help me please?

    Hi Cedric,

    The customer service number is 800833687

    Is the direct link to chat: http://adobe.ly/19llvMN

    You must click on 'Still need help' to start the chat session.

    You get this error: "year error occurred trying to access the service", all trying to access the service by the reader.

    Try to use the link: https://cloud.acrobat.com/exportpdf log in with your Adobe ID and try to convert a pdf file to doc and check if it works for you.

    Agress,

    Rave

Maybe you are looking for

  • Qosmio X 870-127 need vBIOS for Nvidia 670 M

    Hello! I have Toshiba Qosmio X 870-127 and my old Nvidia 670 M GPU died. I bought a new MSI.Laptop recognizes the card but there is error in device menager after installing the driver. Windows has stopped this device because of this. The same situati

  • A6000 3 g doesn't work anymore.

    I bought a lenovo A6000 on February 12, 2015 from flipkart.com Everything (including 3 g) was cool and properly functioning for a month. On 12 March, I changed the SIM to a supplier in Thailand when I was on tour for a week. He worked with the new si

  • Computer does not restart during the installation of XP after copying files

    I do a new install of Windows XP on an ASUS laptop A3G of 2005. After that he said that the CD has finished copying the files, I've been waiting so he could restart.  Restart the computer, but the screen shows only a blinking white line.  Nothing hap

  • WUSB600N Ver.2

    I am running Windows 7 Professional on a Gigabyte MB with an AMD Athlon X 2 processor. My problem is that I can't get the systΦme can recognize the internet adapter WUSB600N (IA), when I try to run the Setup program from the installation disk.  This

  • Feature slide & is disabled?

    I can't drag drop function runs. When I try to drag a photo or file from one place to another on the same page it bounces just in the original location. Automatic sorting will not be moved and there is no way o disable automatic sorting. It was produ