Trying to get my downloads to install. Using Windows Vista

Similar Questions

• No printer Listed Port - can't get any printer to install on Windows Vista Home Premium - Please HELP!

  I was able to print to a Hp Officejet 4215 with no problems and a brother and then printer started to save as offline and would not print. Uninstalled all printers and tried to install a new HP Officejet 6310 printer. Ran the install disc included, but would get the message error, is went to the HP site and downloaded the driver, still received the error msg - Windows found a driver software for your device but encountered an error trying to install it. The specified port is unknown. and installation of the device software has no error. I went into control panel / Device Manager / USB controller group / and tried to uninstall - restarted the pc and still no luck. When I go to the control panel and try to install a printer, there is no port printer not listed and I can't add a new port.  I have connected the printer to another laptop running Windows Vista and recognized the new printer and installed the drivers and the impressions very well, but this laptop will not load the drivers. Help, please... Im a university student and desperately need to print!

  Hello

  All ports are used, and this is the reason why the installation goes through. We can uninstall these devices that are not in use and then try to reinstall the printer. Here's how:
  a. start, point to all programs, point to Accessories, and then click command prompt.
  b. at a command prompt, type the following command and press ENTER:
  Set devmgr_show_nonpresent_devices = 1
  c. type the following command a command prompt and press ENTER:
  Start devmgmt.msc
  d. troubleshoot the devices and drivers in Device Manager.
  NOTE: Click Show hidden devices on the view menu in device managers before you can see devices that are not connected to the computer.
  e. now navigate in imaging devices and then Device Manager expand it. Check if there are any devices that are not highlighted or blurred. Right-click on these devices and choose uninstall.
  f. repeat the same Universal Serial Bus controllers also.
  g. now try to install the printer.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm trying to download Lightroom on my PC. I get the message "is running an operating system that Lightroom is no longer supported" that I am currently using Windows VISTA 64-bit. Help

  I'm trying to download LIGHTROOM on my PC. I get the message "equipped with an operating system that LIGHTROOM can't stand". I currently use Windows VISTA 64 bit. Need more. Suggestions?

  Hi William. Unfortunately, Vista is not a system for Lightroom 5 or 6 of Lightroom. You will need to Windows 7 or a later version. See here: system requirements

• I continue to be ask to install an update: when I do I get this error message every time... WindowsUpdate_00000646""WindowsUpdate_dt000", I use windows vista

  I continue to be ask to install an update: when I do I get this error message every time... WindowsUpdate_00000646""WindowsUpdate_dt000"

  I use windows Vista

  Hi Phdshrink,

  Who is the update that you are trying to install and you get the error?

  You can download the update in the given below link and install the same in administrator mode and check what is happening.

  http://catalog.update.Microsoft.com/v7/site/install.aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am using Windows Vista & trying to download Norton Security Suite for Comcast Xfinity.

  I am the user principal and administrator of this desk top using Windows Vista Home.  I'm trying to download Norton Security Suite Dowload Manager of Comcast Xfinity.  When I select "Run" I get the message "Download Manager requires administrator privileges to download and install the product."  It only allows me to run the selected product.

  Hello

  Download and save on the desktop > then right-click on it and select run as administrator.

  See you soon.

• I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get this error message: Error Message 0 X % 1 in the message for %2 file

  original title: Error Message 0 X % 1 in the message file for %2
  I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get the above error message.

  How I can fix

  Hi SusanReid,

  1. what email program are you using?
  2. you are trying to download from webmail or any mail client?
  3. don't download you and save the attachment or open it directly?
  4. What is the brand and model of the printer?

  I suggest to save the attachment and then print.

• I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code of 64 C. Please tell me what to do?

  I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code 64 C help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to reset components to update Windows from the following link, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to install the updates manually from the link below.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=184

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

  Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

  Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows

• Cannot install Service Pack 2 using Windows Vista Home Edition or anything else on the internet.

  Hello

  I tried to download and install Service Pack 2 using Windows Vista Home Edition, or anything like that on the internet without success. According to me, the key word is internet or a block of Vista from the internet to install anything. Many people here get the same error 80070005 for SP2 as I am, but I think that the problem is with Vista, how the system allows any installs or blocks installed from the internet. I suppose that some are able to go through the download process, but installation is where it does not pass through. There are moments where it seems that the installation of SP2 works, but it will fail eventually. Other times what ever happens to the installation process. The same goes for all other downloads and installs from the internet. I am able to install a program that already exists on the computer, so I know that installs works just not the Internet. Do not send me a link to install because it probably won't last through. I may be able to download but installation will not pass by so that the program will not work. I used the words installation and internet a lot for some reason please take account, when responding.

  Thank you

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Why Spooler subsystem stops when I get my browser to IE8 to IE9. I use Windows Vista.

  I use Windows Vista and Internet Explorer 8. Whenever I have uphrade my browser for Internet Explorer 9, the Spooler subsystem App stopped working and also my printer stops working. Three times, the technician of the Dell software corrected the problem, and I had to pay fees for the service. After the last time, which was earlier this month. the technician Dell told me that many individuals who have used Windows Vista has experienced the same problem of spooler, when they have tried to improve their Internet Explorer 8-Internet Explorer 9 browser. . I experience no such problems with Internet Explorer 8.

  Today, I read in Google news that Microsoft will automatically update Internet Explorer on all computers using Windows, from January 2012. Given problems I have experienced when I update to Internet Explorer8 in Internet Explorer 9, can you please advise me on how I could solve the problem of th Spooler subsystem App that stops working, when I update to Internet Explorer 9?

  Henry Mortimer

  Hi Henry Mortimer,

  1. What is the number of brand and model of your printer?

  2. what measures does troubleshooting the Dell technician tried to solve the problem?

  Method 1:

  If the Dell technician had attempted to remove Internet Explorer 9 each time to solve the problem, you can try reinstalling IE 9 and try to reinstall the printer drivers and check.

  How to install or uninstall Internet Explorer 9?

  You can check the link of Dell support to download and install the latest drivers for the printer.

  Drivers Dell & downloads.

  Method 2:

  If you still experience the problem, then try to run the printer Troubleshooter and verify.

  Solve printer problems

• Using Windows Vista SP2 (32 bit), failed to install IIS

  Using Windows Vista SP2 (32 bit), cannot install IIS.  Tried several of the resolutions found on the web to turn (uninstall .net 3.0) to uninstall WAS.  Still nothing works.  Look at the event log, it appears that the TrustedInstaller.exe is in a loop that indicates that Windows Servicing began a process of change state KBxxxxx package installed to installed.  I have this day to the next release and we found thousands of entries repeated over and over as it in the event Log.

  I would say the TrustedInstaller.exe has been hacked or corrupted, but daily MS patches are applied without error.   I also ran the SFC/scannow command without success.  I tried to restart, don't turn off unnecessary services, execution of installation in Mode safe... go!
  I'm surprised there isn't a utility which will ensure the components that need to exist in the version required for IIS, well... does not exist!
  Any ideas?  I need to get the IIS services are installed for the development of a website of ASP.NET ASAP!

  Using Windows Vista SP2 (32 bit), cannot install IIS.  Tried several of the resolutions found on the web to turn (uninstall .net 3.0) to uninstall WAS.  Still nothing works.  Look at the event log, it appears that the TrustedInstaller.exe is in a loop that indicates that Windows Servicing began a process of change state KBxxxxx package installed to installed.  I have this day to the next release and we found thousands of entries repeated over and over as it in the event Log.

  I would say the TrustedInstaller.exe has been hacked or corrupted, but daily MS patches are applied without error.   I also ran the SFC/scannow command without success.  I tried to restart, don't turn off unnecessary services, execution of installation in Mode safe... go!

  I'm surprised there isn't a utility which will ensure the components that need to exist in the version required for IIS, well... does not exist!

  Any ideas?  I need to get the IIS services are installed for the development of a website of ASP.NET ASAP!

  I have only a limited understanding of IIS and ASP.net.

  1. What are they? IIS 5, 6, 7.0?
  2. make sure that your version of Vista can support.
  Go to programs and features > column to the left, turn Windows has on or off > scrolling Internet Information Service > expand (+) sign and make sure if its level of compatibility under Web management tools. Home Premium can go as far as IIS6. > Make sure check marks are on the elements you need to install IIS.

  3. from what I understand, the version of Vista Ultimate and superior is required to install IIS 7.

  This is as far as I know.

  To install IIS 7, here is a tutorial:
  http://learn.IIS.NET/page.aspx/28/installing-IIS-7-on-Windows-Vista-and-Windows-7/

  Your question needed IT expertise. I suggest that transfer you to one of these support ASP.NET forums.
  Here's one of them: http://forums.asp.net/

• How can I get microsoft publisher works on my computer which uses Windows Vista Home Premium

  whenever I try to download microsoft publisher or microsoft office professional edition with publisher on my laptop which uses windows vista, I get an error message saying that the implementation is unable to act because I need as a result of the other x86platform with vista sp1, or the x64platform with vista sp1... What does that mean? and how can I Publisher on this computer? Thank you

  Hello

  You will need to make a direct download of the SP1, SP1 is no longer available via Windows Update.

  You don't say what that 'little' version of Vista you have (32-bit or 64-bit) and x 86 in your question is the 32-bit version:

  Click Start > right click on computer > left click on properties > it will tell you it.

  Select download OK "bit".

  Download for Vista SP1 (32-bit): http://www.microsoft.com/download/en/details.aspx?id=30

  Download for Vista SP1 (64-bit): http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21299

  See you soon.

• the RealPlayer download button does not show the download of jeuvideode using Windows XP and explorer8

  the RealPlayer download button does not show downloading a video using Windows XP and explorer8

  Hello lailaanis

  First of all exit Internet Explorer. If you want to enable the download button when you hover over a video in Internet Explorer 8 you must go to tools > Preferences > download and save. Then to fix your problem, first UNCHECK the checkbox enable Web download and record in the window right under download and recording options, click OK. Then the Real Player output.

  Now, open Real Player again, follow the steps as tools > Preferences > download and record and this time this BOX called Web download and registration. Click OK and real player output.

  Now open Internet Explorer and visit any favorite video link and the download box will now appear.

  You can also use other services like http://www.keepvid.com/ to download videos from sites of common videos easily in different quality formats which can be played in Real Player.

  Hope that answers your question.

  Concerning

  Zeeshan Ahmad

• Received the following message when you try to install Photoshop CC "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. "So I use Windows Vista not sure do I

  Hello

  I received the following message when you try to install Photoshop CC, "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. »

  I use Windows Vista so not sure what to do now! Any help would be greatly appreciated thanks.

  CC of Photoshop only works on Windows 7 or Windows 8/8.1. No Vista.

  System requirements | Photoshop

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.