Trying to install win xp pro on the Satellite A200 - TH1 (PSAE3C)

Similar Questions

• Blue screen when installing Win XP Pro on the Satellite A100-211

  Hi all.

  I'm started to get really desperate here! I just bought my new Satellite A100-211 and now I want to install my own copy of Windows XP Professional (as the laptop comes with XP Home). But, when I try to boot from my Win Xp Pro CD (with no SP1 or SP2 integrated), I get a blue screen of the STOP just as the installation application reached the phase "the installation program starts Windows! The STOP message says something about a file named "pci.sys".

  I don't know what the problem is or how to install XP Pro! It should be so simple! I even tried the SATA drivers from intel and load the Windows XP Pro install the program installation (F6) with a floppy, but I always get the same blue screen at the same stage of the installation.

  Can someone help me please? Can someone explain how to install Win XP Pro on this laptop?

  Thank you very much in advance! I'm really really freak out with this
  Octavio.

  Hello

  Did you get this error message?
  "stop error 0x7E in Pci.sys".

  I found information on the Microsoft site that you need the latest Microsoft service pack.
  http://support.Microsoft.com/?kbid=839641

• Qosmio G30-163. Try to install Win Xp Pro on the new HARD 120 GB drive

  Hi all

  I am trying to install Win Xp Pro on a new 120 GB HARD drive, but windows setup does not recognize the HARD drive.
  I have only to install a (formatted) HARD drive on the laptop as main.
  The secondary place for HARD drive is empty.

  Can you please help me with this?

  Thank you in advance.

  Hello

  Rose is right you need RAID driver.
  Download from the Toshiba download page and load it before installation of WXP starts using the diskette drive/USB stick and F6 option.

  On this forum, you can find many threads with exact explanation how.

• I can't install Windows XP Home on the Satellite A200-1CR

  I can't install Windows XP Home on the Satellite A200-1CR

  Help

  Did you get any error messages or what?

  Thanks for posting more details!

• Recovery of the Satellite A200-TH1

  Because I met a frequent problem with my Satellite A200-TH1 of starting recently, I was told to use the disks of recovery by the seller. When I use it, after the two initial instructions (F12 / enter setup /F9), nothing happened. I chose the CD drive, and then press F9.

  Can someone help me to complete the process to get my computer recovered fully?

  Hello

  Your computer is trying to boot from CD or what exactly is going on?

  Have you tested different bootable disk to check if the recovery disk works properly? You can use a Microsoft Windows disk to test it. If this disc works, your recovery disc is scratched/damaged, otherwise, it might be a problem with your CD/DVD drive.

• trying to install win 7 pro on a second drive hard withwin 8 on the first hard disk

  I have a pc with win 8 is installed on the primary drive. I bought a win 7 pro os to install on a second disc. (I bought a new pc after my old win xp but I have a little fuzzy) I formatted the second hd as a gpt in 8 victory drive and when I go into the bios and make the cd as disc player starter set main first, even break, win 7 will come, I hit a button, he said: it's the installation files , four colors swirl around and stopping and there he sits and go beyond.  What has changed the setings bios need? It's a motherboard of acer with amd a6 5400 dual core with 16 GB of ram. can anyone help?

  Ken

  Any reason you to format GPT?

  Delete the partition on the second disk, and leave it as "Unallocated", and then install Windows 7.

  For reference: how Dual Boot Windows 8 with Windows 7
  Your newly purchased computer or one you just build a Windows 8 is installed. Now, you want to install Windows 7 as second operating system create a computer to dual-boot and you giving the best of both worlds.
  http://www.PAGESTART.com/win8dbwin701181301.html

  J W Stuart: http://www.pagestart.com

• Unable to install Win XP Pro on the Qosmio X 300

  Is it possible to install XP Pro on my Qosmio X 300.
  I tried to install it but now luck.

  I could format the HARD drive and then install or what I have to do something with the Bios.
  Frank

  Of course, you can install Win XP on this laptop.

  Can I ask you if you have already created a Toshiba Recovery DVD?
  I guess you laptop supports the recovery of HARD drive and no drives have been provided with this device.
  Before to format the HARD drive, you must create a recovery DVD using the Toshiba Recovery Disk Creator.

  Furthermore, I believe that you are not able to install XP because the SATA driver were not included in your Win XP operating system.
  Well, on some laptops you can disable the SATA AHCI in the BIOS and could spend in compatible mode. This would install the Win XP without a SATA driver.
  But this option is not available on all models of laptops. You need to check this first.

  Finally, I must say that this topic has been discussed a lot of time here in the forum. Maybe not specifically in the forum of Qosmio X but in the other forum and the SATA installation procedure is the same on all laptops.
  So look for a little

• Cannot install Windows XP Pro on the Satellite A100-411

  Hello

  IA´ve you have a question. I have a Toshiba Satellite A100-411 with Windows Vista Home Premium. Because of the performance that would have me much better with Windows XP, I tried to install Windows Xp on a second partition, but on the same hard drive.

  The problem is that it did not work, I put the Windows XP cd in my DVD player, did a restart and started from the cd.
  The first window Windows Xp installation opened and checked my system, but when he did and
  wantet to start the main installation, I got a blue screen, where stood her system was closed due to an error and that I should change my video card, or should I turn caching and shadowing in my Bios.

  But my video card really works and is ok and I can't find the caching and shadowing in bios, so I can't install windows xp.

  So my question is is it possible to install Windows XP on the A100-411 when Vista is installed on the other Partition.

  I did something wrong or isn´t is it possible to install Windows Xp after Windows Vista on an A100-411
  Sorry for my bad English and greetings from the Germany

  Hello

  Of course, it should be possible to install Windows XP on the second partition.
  First you must create the partition. Vista provide a clean option for partitions of creation because the 3rd party applications such as Partitions magic doesn't work under Vista. In disk management you can reduce the size of a partition of first and could create a second partition on the HARD disk free space.

  All your Windows XP CD contain service packs? I myself remember more old CD s WinXP don't were not delivered with SP2! In such cases, it s a good idea to create a clean XP Boot CD using 3rd application called nLite. Its freeware and you could find on the net!

  Please check this!

• Unknow new device after the bios update and to install win 7 pro to the T400

  Hi all!

  My laptop: T400 2767-2JU. After the most recent update of the bios version (3.09) and own to install all the drivers in the Lenovo Site, I found an unknown device: Simple PCI communications controller. I don't think it's Thinkpad Modem, because, before updating the bios, the system does not have it.

  Please see my picture of capture: http://i92.photobucket.com/albums/l39/hoangnhat1613/T400-UnKnowDevice.jpg

  Someone help

  PS: Sorry for my English . Where to post the link to the image? All the drivers are installed

  I've seen it suggested that this (lists of mine such as serial Port PCI) device is Intel AMT / series on local network service.  Not useful for users and some utilities normally hides.

  Hardware ID Ven_8086 & DEV2A47

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T500-Intel-driver-missing/TD-p/102526;jsess...

• Can I install second HARD drive in the Satellite A200-AH7

  I wonder if I can install the second hard drive in my laptop and if I can do this what equipment should I.

  Laptop computer has two covers of hard disk and manual is not clear on this subject.
  He said: some models.

  Thanks for the info

  You can't find the answer very easily.

  Remove the second HDD Bay cover and check if there are a few HARD drive connectors/pins.

  If Yes, then you could install a second HDD.
  If not, you can not use second HARD drive.

  Good bye

• While trying to install windows 7 pro 64-bit, as the files to try to finalize an error message appears and says that windows cannot manipulate files to work with the hardware in my computer

  Original title: Win hardware problem. 7 PRO

  Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.

  The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.

  -Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)

  Or they are corrupt, try to get a new copy and try again.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Acer Aspire its problems after Win 7 Pro and the new installed HARD drive

  I have an acer aspire 8735 laptop g-6502 which has recently undergone a WD 500 GB drive HARD failure. I replaced that with a 7200 RPM Hitachi 1 TB drive and given that I don't have a Win 7 original used a disk Win 7 Pro with an extra friend.

  Windows 7 Pro and HARD disk installation went smooth. But now when I plug an HDMI cable to watch through my Marantz receiver, comes from the video, but I have to do manually the Marantz the default audio device for sound. When I unplug the HDMI, I must return to the parameters of sound and unenable Marantz and re - activate the Realtek audio.

  Before the drive died HARD, happen all perfectly when you plug the HDMI cable in and the fact to disconnect without any fiddling around with settings.

  I also have a few other questions:
  1. the touch volume control next to the numeric keypad does not control the volume more
  2. the keyboard key used to have a setting to display it. You can use two fingers on a tablet to drag the image to the screen bigger and smaller.

  I looked the site of Acer and also used my drive Application and drivers to reinstall everything that looked related to these issues. When first, I installed Win 7 Pro I let Windows find the appropriate drivers. It worked for some things but not others.

  Any ideas? I have a few scratches on my face and my forehead in frustration pain making me beat me here. Funny, but true, so all ideas are appreciated!

  Here's my screen design Mgr impression - there's an 'unknown' device IDK how to understand what it is.

  

  Hello...

  You have installed the application to launch mnager. Alternatively you can install from this link and check the function of touch volume control and display adjustment launch application manager

• Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error."

  Original title: error code 88982F04

  Received this error code when trying to install win 10.   the message was ' ' has no 1 update "and"windows update has encountered an unknown error."  I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC.  Can someone please help with an answer.

  Thank you

  Delete C:\$WINDOWS.~BT

  Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.

  

  If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• The Windows Installer keeps popping up repeatedly tried to install Win Media Gallery

  Windows Installer continues to appear repeatedly, trying to install Win Media Gallery.  When I accept it tells me it cannot locate a msi file - defeats what it started - only for the popup to come back.  I took the drive using the disable windows in the control panel features, but that doesn't stop her.

  My OS is Windows 7HE - which is bang up to date.
  I tried virus checkers etc, but the installer appears everytime I open one of any number of programs.   The onl; are there common thing is always wanting to install windows media gallery - which I do not think that I have ever used!
  Help, please

  With regard to fixing or uninstallation of what would be your call.

  Windows live essentials 2011 includes, direct mail / live photo gallery / live movie maker and a few other features that I don't remember.

  Everything I personally is manufacturer of Gallery and photo film installed.

  If you can activate the program and then do a selective activation like me and never use it :)

  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-home

  At least you can review some of them and decide for yourself and maybe get rid of the popup in the process?

  See you soon.

• Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. also have trid copying from back up. It seems to load correctly. When open ask for my pa

  Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. have also tried copying from back up. Same thing is happening anyway. It seems to load correctly. When open it asks my password but not to its own serial number. It is open, but don't watch not at the full bar at the top, that the word Acrobat, and it does nothing? Worked very well before the old drive crashing. On the same operating system?

  Not compatible does not mean that it cannot work (even if sometimes this does not mean that). This means that it has never been tested and not be fixed; This often means people have seen strange and unpredictable issues.

  Acrobat makes changes to the system, it is always more vulnerable. DC Acribat is the current version. If the goal is to slow down completely, perhaps more profitable subscription activity.