Trying to install Zune. I get an error message 'cannot create the folder' and access is denied. Why.

Similar Questions

• Error message: cannot create the folder C:\Documents and Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt Settings\

  I recently had a problem with the virus 'Restore Windows'. I was able to get rid of it with Malwarebytes antivirus scanner, but when I turn on my computer I get this error message.
  Cannot create the folder C:\Documents and Settings\ of Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt
  
  
  I'm no expert, but I feel that my C drive disappeared, or at least has been hidden. My documents, pictures and music files are all empty. My programs (start > all programs) have been removed and deleted the shortcuts on the desktop. When I go to my computer, my personal and shared document files are not accessible. Under the description it says that they are hidden. My local disk (c) is also empty, but there is still very little space which suggests that programs and files have not been deleted.
  Is it possible to recover my files?
  Thank you

  Hello

  MoHlog.txt file is related to the software of modem on the computer, you can uninstall and reinsta it check if it works.

  Also scan your computer for any infection by virus still present on the computer using any scanner online.

  You can also try the system restore to the point before that the computer has been infected by the virus and check if it helps.

  Good luck!

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Trying to install CC2016 Illustrator - get fatal error 126 - cannot download

  Trying to install illustrator.  It starts to download, then I get a download error - click more and it says fatal error 126:

  Exit code: 126

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 2 warning (s)

  FATAL: Fatal Error ' 126' occurred in download

  FATAL: An error has occurred in the download package (name: AdobeIllustrator19-Core Version: 19.2.1.147). Error code: '126'

  WARN: Invalid Arguments to utilDecodeBase64Data.

  WARN: Invalid Arguments to utilDecodeBase64Data.

  -------------------------------------------------------------------------------------

  How to properly install illustrator.  I managed with other applications; Photoshop, After Effects, first, Media Encoder to date...

  Download Illustrator CC 2015 error refer

  Concerning

  Hervé Khare

• Tried to install Trend Internet Security program, error message, necessary for the installation of Visual C ++ 2005

  When installing Visual C received then Error 1935' Microsoft. VC80. Open MP type = "win32policy", processor version 8.0.50727.762 Architecture = "x 86".

  Running Windows Vista 32-bit - I'm no guru IT but can generally follow clear instructions - can anyone help?

  Hello JenMox,

  Sorry for the delay in publication.

  Look at the following information about the Error 1935.

  Step 1

  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 Redistributable Package, and check if you can install the software. Be sure to download the correct version, if your computer is 32-bit or 64-bit.

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 64)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da

  I hope this helps.

  Sincerely,

  Marilyn

• In Windows NT Workstation 4.0, I get this error message: cannot find the sound card with this port number. Please check your settings and try again. Any help?

  There is this computer that I recently installed Windows NT Workstation 4.0 on and I would like to know how to install sound blaster 16, on this without receiving this error message. If someone wants to say how it is obsolete or install a new operating system, please do not post. Thank you. If anyone has the same issue on an ordinary pc or Virtual PC, you can publish. It is a computer. If you're going to say how microsoft does not support, I need to install a better operating system or the above mentioned inconvenience or something similar to those, please do not post. Any help will be appreciated. The specific sound card is Creative Labs sound blaster Pro 16 of 1.x.

  Hello Grant Heckel,

  Windows NT Workstation 4.0 is not supported in the Microsoft Answer forum.

  You can do a search on the internet and find information about the Sound Blaster Pro 16 and NT 4.0 Workstation.

  Such a thread is listed below:
  http://www.pcguru.plus.com/VirtualPC.html

  Sincerely,

  Marilyn

• get this error message "cannot save the picture that you don't have enough access privileges. Help just spent hours doing the tags and need to save quickly

  I have just designed hang tags and you want to save the file, but continue to receive the error message when I try to save.  "Cannot save you don't have enough access privileges"? Help please

  Try changing the location you're trying to save in.

• SE error message cannot open the XPCOM and impossible to open ALL pages

  After loading the updates, I get this error "Couldn't OPEN XCOM" I can't open any programs or emails, does not open Firefox or IE. Have tried the system restore several times without a bit of luck, even that properly ends, begins to tear my hair out now.

  You should not need to use windows, set up of the disks.

  You only need to remove the Firefox program folder to make sure that all files are removed before installig a freshly downloaded version of the Firefox installer.

• Cannot download game - error message "cannot create the temporary file.

  Run windows 7 Home premium edition. Don't let me download games on a gaming site (Zylom). Used to have no problem with XP. Now on a new computer and cannot block the security settings. I get the error message - "unable to create the temporary file. It's very frustrating because it goes through the procedure of full download and then does it all at the end!  Help, please... I have run Norton 360 on the computer.

  Hey,.

  Same mistake - http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/cad374f2-7da2-448b-bd92-23154763b9ec

  As suggested, you must post in http://www.zylom.com

  Dana

  Girls. You never know what they think.

• Whenever I start my computer I get an error message "" cannot find the file M3PLUGIN. "." DLL. How can I solve this. ___

  This happened only after I deleted my temporary files, but does not see why this file would have been affected

  The file is part of the malware MyWebSearch toolbar. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Manage startup:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• I get an error message. cannot decompress the file no INF file found for XP

  I did a system restore and now I can't conect my printer to my PC the message isn't saying no INF file found. I have download a new driver from the supplier, but it won't unzip.

  Go to your printer manufacturer's web site, download the drivers for Windows XP and install these drivers according to their directions.

• Why do I get an error message "Cannot delete this folder because it is used by another user" when I'm the only one who uses MY computer? The folder is also EMPTY.

  Windows XP version 3? The record has been one of my photos, I created.

  Hi Digdragon,

  ·         How many accounts user is present on the computer?

  Follow the suggestions below for a possible solution:

  Method 1: If there are several accounts of users present on the computer then do you disconnect other users accounts and try to delete the folder.

  Method 2: If the method above is not enough you can start the computer in safe mode and try to delete the folder.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

   

  Hope this information helps.

• during startup, I get an error message 'Cannot find the resource file' how to restore this file?

  I had a virus fakespypro.  After it has been deleted I can't access my resource file at startup.  I need to reinstall windows vista to restore it?

  Hello

  This message is probably part of the scythe. Is there more information you can give about this?

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I removed my desktop application Adobe CC and now it won't let me not re-install. I get an error message 43. I tried a few things suggested in the forums, but now I can't open any application!

  Hi, I removed my desktop application Adobe CC and now it won't let me not re-install. I get an error message 43. I tried a few things suggested in the forums, but now I can't open any application!

  Hi Aude,.

  Thank you very much for your answer!

  In the end, a very helpful person at Adobe got my correction of a problem.

  Sincere greetings,

  Nigel

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.