Trying to turn on network sharing and discovery, I get the message 'the specified service does not exist as an installed service' I am running AVG internet security 2013

Similar Questions

• "The specified domain does not exist or could not be contacted" then tried to connect to Windows

  Original title: could not open a session after computer F8\Repair selection

  Running Vista Home Prem

  Dell Inspiron 1501

  No Cd MFG.

  I have recently been struck by application pretty nasty virus/malware and want to do a factory restore. The problem I have is that when I select the option to repair through F8 at startup I get to the logon screen and all it shows is 'another user' in the way witness name of user/pass fields.

  I tried every possible user and the user/pass combo I could find and think. Every time I have enter a value in these fields and try to connect, I get the message "the specified domain does not exist or could not be contacted", if I try to log in without putting information in the field I get a msg of windows security saying that I have a user/pass to open a session.

  I looked in all possible aspects of user accnts, changed the need to open a session, deleted all passes, gave full control to all parts of windows and I still get the same screen.

  I need to know if there is a way around this or if the virus has changed the aperture setting of session for the repair operation? Also, if someone could tell me what measures the system and what files it loads when you browse the F8 repair op.

  Anything you could tell me would greatly

  Thank you

  Running Vista Home Prem

  Dell Inspiron 1501

  No Cd MFG.

  I have recently been struck by application pretty nasty virus/malware and want to do a factory restore. The problem I have is that when I select the option to repair through F8 at startup I get to the logon screen and all it shows is 'another user' in the way witness name of user/pass fields.

  I tried every possible user and the user/pass combo I could find and think. Every time I have enter a value in these fields and try to connect, I get the message "the specified domain does not exist or could not be contacted", if I try to log in without putting information in the field I get a msg of windows security saying that I have a user/pass to open a session.

  I looked in all possible aspects of user accnts, changed the need to open a session, deleted all passes, gave full control to all parts of windows and I still get the same screen.

  I need to know if there is a way around this or if the virus has changed the aperture setting of session for the repair operation? Also, if someone could tell me what measures the system and what files it loads when you browse the F8 repair op.

  Anything you could tell me would greatly

  Thank you

  Hey

  link below has the dell way they do a reinstall of recovery

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  If you continue to have problems with it contact dell

  There is also a support link for dell at this link of recovery

  It's their recovery process

  Walter, the time zone traveller

• Trying to enable and disable the scheduled tasks back but becomes "the name of the specified task * does not exist in the system.

  I am trying to create a .bat file that stops a set of scheduled tasks and start another game, but when it works it is said that there is no such thing as the name of the task

  SCHTASKS/Change/disable /TN ImageCopyTest
  ERROR: The name of the specified job 'ImageCopyTest' does not exist in the system.

  Running schtasks/query does not list the tasks that I have implemented in Task Scheduler

  For operational reasons, the tasks are set on "Run If the user is logged in or not ' and I read somewhere that this automatically makes the hidden task

  Can someone shed light on how I can get around what I need this operation for our recovery after disaster

  It's on Windows Server 2008 R2 Enterprise

  Hello

  Apologize for the delay in response. Because the question you posted is related to Windows Server and more complex than that which are usually dealt with here, this issue will be safer in our MSDN forums that cater to the more THIS professional audience.

  Thank you.

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Cannot turn on network discovery. I get the message "specified service does not exist as an installed service.

  Suddenly, something has changed in my computer and now I can't turn on network discovery. Every time I try, I get message "the specified service does not exist as an installed service. I get the same message for others e.g. file sharing and printer sharing. Changes the most recent have been updated to McAfee a few days ago. But the network worked well until last night.

  Hello

  What is the brand and model of your computer?

  Method 1:
  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  a. Click Start, type firewall and then click Windows Firewall with advanced security.
  b. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP-) in the list.
  c. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  d. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click the service computer browser and TCP/IP NetBios support.
  c. change the startup type to automatic and start the service.
  d. apply the changes.

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  I hope this helps.

• Thunderbird stops for one minute with the symbol of the waiting and then returns an error message on a script does not? CAUSED: By McAfee

  Thunderbird stops especially when you write a message, displays the circle waiting and finally back with a message on a script does not properly. The choices are stop script or continue, the choice is obviously stop. It's embarrassing, I have set up with the same problem with XP on Thunrderbird and on Firefox and supposed to with Win 8.1 this would go, I was wrong. It is a standard installation of you bird, have not had the problem again with F'fox.

  Thanks for the info, I intend to replace McAfee but looks, as norton may have the same problem or a similar problem and is probably what is causing issues with XP. E machine XP will disappear but will have to solve on the new machine.
  Once again thanks for the info.

• Family safety has blocked me and said the requested page does not exist, moved or is temp down.

  Original title: parental control

  Family safety has blocked me and said the requested page does not exist, moved or is temp down. Help me!!

  Hello April,

  Thank you for the information. For us to better visualize your main concern, please provide a screenshot of the message/code that you receive when you click on the family within your computer settings. To take a screenshot, you can follow the steps in the link/s below:

  • For XP
  • For Vista/Windows 7
  • For Windows 8

  I got a private message where you can securely download the screenshots. After downloading, please respond to this public thread for us to be warned.

  Visit us for your answer.

  Thank you.

• Windows media player will show it's extraction and burning, but then the burned cd does not play?

  Windows media player will show it's extraction and burning, but then the burned cd does not play? Used to work properly, then a few days ago decided not to make a playable copy.

  Your setting got changed if you don't burn it as audio. This is the setting you need to change...

  Click the dropdown arrow in the "burn" pane and select "audio disc" and you should be ok again. R

  (You will need to start over with a fresh blank disc).

  

• When I try to import multimedia an error reads "in QuickTime and or the appropriate codec does not appear to be installed."

  When I try to import multimedia an error reads "in QuickTime and or the appropriate codec does not appear to be installed."

  [moved based on duplicated... messages which I deleted... MOD]

  You try to make a DVD or Blu - ray (or both)?

  This absurd error with 2 exports that you describe. If Yes, provide the screenshot of mediainfo John queries.

• I need to move my e-mail to another account. Moved jobs and that the e-mail does not exist. Unable to get my password.

  I need to move my e-mail to another account. Moved jobs and that the e-mail does not exist. Unable to get my password.

  Hello

  Please see change associated with Adobe ID email address

  Hope that helps!

  Kind regards

  Sheena

• I am trying to create a button print in my form, but the Action tab does not appear

  I am trying to create a button print in my form, but the Action tab does not appear

  I thought about it. When I tried to create a new form, I chose the "this form needs the signatures '. This option does not allow to add action buttons. If I create the form without checking the signature box, it works.

• Converter Standalone 4.3.0 question - Get "the specified parameter was not correct" and no source listed volumes

  Sorry - hopefully an admin can move this to the correct forum. I could find no community forum labeled converter so no idea where to post this message.

  My first time trying to use the converter. Use the latest version of the Converter 4.3.0 to try a P2V by using the source computer. This is a laptop Dell D820 running Windows 7 Ultimate x 64 business. I chose the source machine and all the default settings. Destination product is VMware Workstation 7.x and target files are either local or to a port USB drive (tried both). In the last step, I get a yellow bar with the error "the specified parameter was not correct" "but the following quotes are empty and presume it suppose to say the name of the setting.» The only thing I see that is suspect is that if I click on change in section 'Data copy', the list of volumes and empty and assume that shouldn't be. The sample video to get advice on the use of converter on VMware support sites show a volume listed here. I tried the same approach on a completely different system under Vista SP2 and still no volumes appear so maybe it normal?

  No idea what I am doing wrong? I did export logs and watch and it appears no volume information has been captured (a lot of & lt; destroyed & gt ;) but even once, just guessing.) Any advice would be appreciated greadly.

  Thank you

  Don

  I had the same problem on a Win7 x 64 machine... There was no listed disk to convert.

  I managed to solve the problem by running the converter as an administrator. Right-click on the Desktop Converter icon and select run as administrator.

  The disks appears and you can select which can be the converter.

• cluvfy returns the "/tmp/" path does not exist and cannot be created on nodes

  Hello
  I'm installing Oracle RAC for SAP to AIX 5 L.
  After performing due diligence for the installation of cluster service, it returns the following message:
  "/Tmp/" path does not exist and cannot be created on nodes
  This meessage happens after checking access node and the phases of user equivalence.
  This is my complete log:
  pr_bd01/oramedia/clusterware/Disk1/cluvfy / > stage pre - crsinst - n pr_bd01, pr_bd02./runcluvfy.sh
  
  Conducting due diligence to install cluster services
  
  Audit accessibility of node...
  Verification of accessibility node from node 'pr_bd01 '.
  
  
  Verify the equivalence of the user...
  Check of user equivalence passed for user 'oracle '.
  
  ERROR:
  "/Tmp/" path does not exist and cannot be created on nodes:
  pr_bd01
  Audit will proceed to nodes:
  pr_bd02
  
  Check prior to the installation of cluster service failed on all nodes.
  
  The directory/tmp is a shared file system and oracle user can write and read
  User Oracle ID is the same in both nodes
  The dba group ID is the same in both nodes
  Oinstall GID is identical in the two nodes
  The primary group for the user Oracle is oinstall
  
  Where is my problem?
  
  Thank you
  
  Published by: user8114467 on 02/27/2009 07:17

  You can also run with - verbose flag - what is the difference between / tmp on 2 machines - define export CV_DESTLOC = /.

• RMAN-06056 and the data file does not exist

  Hello
  
  I'm working on Oracle 9i Database (9.2.0.8.0) on AIX 5.2 and we try to run a full backup of RMAN, but it seems to be failing with an error as follows;
  
  From backup to 27-SEPT.-10
  using the ORA_SBT_TAPE_1 channel
  using the ORA_SBT_TAPE_2 channel
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the backup to 27/09/2010 01:33:17 command
  RMAN-06056: could not access datafile 23
  
  I checked the v $ datafile and it shows that it is in a State of recovery.
  
  Select the State, file No., name from v$ datafile
  where status <>'in LINE '.
  order by 1
  
  RECOVER /u06/oradata/test_sys/data/msg_log06.dbf 23
  
  The file does not exist at the level of the BONE and the RMAN, it shows as;
  
  RMAN > resync catalog
  + 2 >. +
  
  from full resynchronization of the recovery catalog
  full complete Resync
  
  RMAN > outline report;
  
  Report of the database schema
  K - bytes Tablespace RB segs Datafile file name
  ---- ---------- -------------------- ------- -------------------
  819200 + 1 SYSTEM YES /u011/oradata/test_sys/data/system01.dbf+
  
  + 23 0 MSG_LOG NOT /u06/oradata/test_sys/data/msg_log06.dbf+
  
  The associated tablespace cannot be just deleted given that some other files of dependent data. The RMAN script has also been changed
  
  change archivelog than any overlap;
  backup database more archivelog entry remove
  Skip inaccessible;
  
  But the backup fails again, please advice.
  
  Concerning

  Run

  LIST OF BACKUP OF THE FILE 23

  to see if you have previous backups. If you have a backup of the data file, you can then
  Put the offline data file
  RESTORE the data file
  RECOVER the data file.

  If you want to 'ignore' this test taking it Offline datafile
  ALTER DATABASE DATAFILE OFFLINE 23

  then use "SKIP OFFLINE" in your RMAN BACKUP DATABASE command.

  Hemant K Collette

• Unable to change screen turn off or sleep modes, it gives you the choice, but does not take account of their

  Why windows 7 with service pack 1 does not change screen turn off or sleep modes, it gives you the choice but he ignores them

  Hi William,.

  1 did you changes to the computer before the show?

  2. What is the brand and model of the computer?

  Please follow the instructions to troubleshoot the computer's power:

  Method 1: Run the troubleshooters mentioned:

  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2: Update the latest display drivers

  1. Click the Start button
  2. Select Control panel
  3. Open Device Manager
  4. Expand the graphics card
  5. Right-click on the drivers, and then select update
  6. Restart the computer

  Method 3: Scan SFC Run in the computer

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows system files
  http://support.Microsoft.com/kb/929833

  Method 4: Check the link to solve power problems in Windows 7:

  On troubleshooting in Windows 7 power management
  http://support.Microsoft.com/kb/980869

  Let us know if you have other questions about Windows in the future. We will be happy to help you.