trying to update my locked apple iPad 2. has received the error 1671. What should I do?
My iPad 2 is locked to try to enter the incorrect password. I use it in my bakery and someone must have been playing with it. Now, I ran out of time to try and it is locked. I tried to erase everything and, when I did I got the error 1671. Help.
Hello SGJ663,
Sorry to hear about the problems you are having with your iPad. The good news is that there is a solution for your problem. In the case where you have locked your iPad with mistyped password six times, you will need to connect your iPad to your Mac or PC and do a full restore from iTunes.
Please follow the instructions available on the following link.
https://support.Apple.com/en-us/HT204306
This support article will give you all the information you will need to clean your iPad and regain access. If you have already gone through the process described by the aforementioned article, please make an appointment with your Genius Bar local so that you can receive additional assistance. To find an Apple store in your area, please visit http://www.apple.com/retail/ and search for the nearest store. Once you have performed the search, use the list to find the store nearest. From there, select a store and you will be taken to the page for said store where you can make a reservation with the Genius Bar.
Good luck to regain access to your iPad.
Tags: iPad
Similar Questions
-
I am trying to cancel my hotmail account, but continue to receive the error one message or several paid services on my account must be cancelled everything first. I am not and have never been subscribed to all the services, I have a free account. No one knows what to do to cancel the account?
original title: I can't cancel my hotmail accountHere is an article explaining how to avoid the trap of "paid services" during the closing of a Hotmail account: How to close a Hotmail account
Noel
-
Hello
I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.Any of you have an idea what can do?
Thank you!Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
has received the error ORA-44416: invalid ACL, while trying to enable network services
Hi guys I got the ERROR ORA-44416 after the activation of services network in 11 GR 2 to send emails, so I ran this command found just as shown below in the Oracle document library
SELECT THE ACL, PRINCIPAL
OF NACL, XDS_ACE ACE DBA_NETWORK_ACLS
WHERE HOST = ' *' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL AND
NACL. ACLID = ACE. ACLID AND
ARE NOT (SELECT NULL FROM ALL_USERS WHERE USERNAME = MAIN);
That returned a result of
no selected line
What could this mean
The installation is done on a localhost and the APEX version is 4.2.2 browser is mozilla fire fox
ORA-44416 means that the ACL that you tried to create to refer to a valid principle - that is, the user does not exist.
The SQL code that you included above seems to be looking for associated ACL principles which are more database users. I don't see a direct link between this request and the ORA-44416.
What was your original script of ACL?
Also, because it is a question of database rather APEX you might get a better answer on the forums of the database.
-
Is my Apple iPad WiFi Mini unlocked the cell plant (Verizon)?
Is my Apple iPad WiFi Mini unlocked the cell plant (Verizon)? It was purchased at Apple December 2013. He is a certified refurbished by Apple
Yes.
-
I TRIED TO INSTALL AN UPDATE BUT A DIDIN'T GET INSTALLED AND THE ERROR IS CODE 52D?
I TRIED TO INSTALL AN UPDATE BUT A DIDIN'T GET INSTALLED AND THE ERROR IS CODE 52D?
Hey alisan, Jean Marc.
On what update did you get the error code? Check the history of update Windows for the exact number of KB.
1) click on the Start Menu.
2) click on all programs.
(3) when the window opens, click view update history in the upper left corner of the window.This gives the full list of recently made updates and also the status of the installation as if the update installed successfully or not.
If you have not updated, take note of the corresponding article.
Now visit http://www.microsoft.com/downloads/en/default.aspx , enter the KB article number and download the update of the same.
More often than otherwise, it should get installed from the download above.Just in case you have trouble to install the same, consider resetting your Windows Update components after which the installation from the source folder.
Click automated Microsoft Fix it to reset the components automatically.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058This should be it.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.
Hello Tallydupp, welcome.
Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
Try to uninstall it if it exists.Let us know what happens
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading? Tried to look at the code but nothing helped. Any suggestions?
You can watch the following article to see if this will help with the error 80070643.
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643>
UTC/GMT is 15:50 on Sunday, August 19, 2012
-
Fix error code 643
Problems installing KB2539636, KB2533523 and KB2468871. I get the error code 643. Can someone help me? Or point me in the right direction, where I can get help?
Hello
- You are able to install some other updates?
I suggest you follow these methods and check if it helps.
Method 1:
Have you tried to install this manuallyKB? If this isn't the case, you can try it? You can download here (the good language):
KB2539636
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=27017
KB2533523
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=27014
KB2468871
http://www.Microsoft.com/download/en/details.aspx?ID=3556
.. .x64 -is for 64-bit Windows Vista
... .x86 - East of 32-bit Windows Vista
How to know if Windows vista is 32-bit or 64-bit is here:
Method 2
I suggest to run the fixit from the following link and try the steps.
You receive the error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates
http://support.Microsoft.com/kb/976982See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
I tried to update to IE9 and he returned as failed with error 800F080D. Why is - this happenning
Hi Tena Guevara,
1. did you try to install the stand-alone package of IE 9?
I suggest you to check if you have all the prerequisites installed for internet explore 9 http://support.microsoft.com/kb/2399238
Alternatively, you can try to install the stand-alone package of IE 9 and check: http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages
Refer also to the links below and check if you have done all the requirements before installing internet explore 9-
Solve the problems when you can't install Internet Explorer 9http://support.Microsoft.com/kb/2409098
How to install or uninstall Internet Explorer 9?
http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
Hope this information is useful.
-
CC so that he was trying to install updates is unable to connect to the server. What should I do? This is what it looks like.
Check your hosts file.
help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
I have 10 items. I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7. If someone could please point me in the right direction, I would really appreciate it!
Normally, I shoot with the 7dmarki and have never had any problems. After troubleshooting my error message 'cannot open IMG1111 because it's the wrong file type', only the options have been updated plugin raw from the camera, to buy the latest version or uninstall and reinstall. First train to the plugin to update because it was a leased device. Thanks again!
Thanks MichelBParis! I didn't see where he said to 12 items. I downloaded the free DNG Converter last night and not had much luck. It is not recognizing that I have all files in the folder at all. Don't know what I'm doing wrong!
-
Hello, I am trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
Uninstalling and reinstalling - nothing change.
Hi slawek,.
Please see the thread below where this issue was discussed:
Kind regards
Sheena
-
I tried to update my cc and received the error code: A12E1
I tried to update my cc and received the error code: A12E1
Hi Samson,.
Welcome to the community!
Please perform the following steps:
(1) restart the computer.
(2) if the error persists, rename the OOBE in OLD OOBE folder of
Mac: MAC HD/Library/Application Support/Adobe
Windows: C:\Program Files (x 86) \Common Files\Adobe and
C:\Users\ (UserName) \AppData\Local\Adobe
3) download Creative cloud once more and try to run.
(4) if it you is still facing a problem then Quit/end the notifier AAM address
Windows:
Press Ctrl Alt Del
Start the Task Manager
Click on the "processes" tab and check if you have AAMNotifier running
If Yes, click end task
Mac:
Go to Spotlight (magnifying glass at the top right on your screen)
Type activity monitor
Press ENTER to open the activity monitor
Check in activity for AAMNotifier monitor
Leave this process if you find
Thank you!
Ankit
-
I added a new apple ID. He continues to show former apple ID what me I forgot the password. What should I do?
Bought/downloaded content by one that Apple ID is linked forever, and in the case of applications will always require to update.
Your best bet is to try to recover the password for it. Go to http://iforgot.apple.com and try to get it back.
Maybe you are looking for
-
DesignJet 1050c more: 1050c print head cleaning
Hi all I recently bought a 1050c more printer in fairly decent condition. I used to use a Roland SP540v at the office but this 1050c was home so I'm somewhat familiar with printers large format. His print beautifully after I replaced the timing belt,
-
Play the video full screen on PlayBook
Is it possible to launch a video fullscreen on the PlayBook? For now, I open a video which is fixed at 1024 x 600, but the effect is not as good as the mode full normal screen.
-
I want to change a work that I created. but I "a database object was specified that does not exist" at the level of the name = > 'jb_do '. BEGIN SYS.DBMS_SCHEDULER.set_attribute ( name => 'jb_do', attribute => 'JOB_ACTION', value=> 'myProcedure'); EN
-
Fingerprint HP scanner won't work - Windows 8
Hello: I recently bought a laptop HP Envy DV 6 with Windows 8 and then bought Norton 360. Norton 360 would run analyses quick or full scan of the system. I contacted Norton and they remotely access my computer and fix the problem (so far). However
-
Use of reservations, you must network configuration profiles, but is there a way to disable VCAC to distribute any IP address of this profile? Basically, I want to disable the vCAC DHCP