TSSTcorp DVD +-error code RW TS - H653G ATA Device 39. I can't reinstall the driver. What can I do? programs and disks will not play.

Similar Questions

• my cd/dvd is more listed on the computer and it will not play anything

  If I'm going to start the computer and then open cd/dvd is more listed also is absent from the menu equipment. I'm not a COMPUTER guru to take it easy with the answers. Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• BlueRays disks will not play the HP Envy 17 with Windows 8.1 and Cyberlink Media Suite and Power DVD

  DVD will load successfully and play, but BlueRays won't, even if this computer has a BlueRay player and Cyberlink software to play.  It recognizes the title of BlueRay, seems to load the disc then returns to the initial screen and does nothing.  When I click on play, Cyberlink application if I want to restart or resume playback.  Either select the button comes back to me early in the process.  Any suggestions?

  I downloaded sp63425.exe earlier today.  Which corrects the problem.  Thanks a lot for your help!

• When you download the creative combination 6 applications it forces and now will not start download again because of an error

  I was download of creative applications 6 suit and he asked me to force quit other applications so I did and with them it forces to leave the Setup program and now when I try to download an error screen appears

  UINSTALL anything cs6 which can be installed.

  Run the vacuum cleaner by the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer and try again to install cs6.

• Tube videos, games on facebook and you will not play error #1000

  What's wrong?  Games and videos don't load and play.

  Hello

  Follow the guide by Daniel_Potyrala on the link below to completely uninstall and reinstall the Flash Player plug-in.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/the-solution-to-most-problems-with-the-Flash-Player-plugin/TD-p/1399719

  Kind regards

  DP - K

• DVD s 600 will not play movies I paid for?

  I was told that this dvd 600 s would play DVD movies on my computer. I installed the software that came with the dvd, and it will not play one of my movies. Was wrong to the sales rep and I need another type of dvd player? Or I'm doing something wrong. All I want to do is play movies I bought as if I was able to do on my other HP computer. My new computer is HP ENVY TS m6 Sleekbook.

  Hello

  You need iTunes to play movies from iPad. Please try the product for free, he'll play almost all video formats:

  http://www.videolan.org/VLC/download-Windows.html

  Kind regards.

• DVD error Code 19___

  My CD/DVD-RW - Optiarc DVD RW AD - 75308B ATA Device does not work, it starts, runs and then stops on the Device Manager I get the following message

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive

  
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Dell Inspirson 546 s burned DVD will not play, error 'error code 740 failure of process of creation ".

  code 740 burn movie but will not play on player please help

  I have a Dell Inspirson 546 s I burned movies much but for a reason, it will still burn, but will not play on a standalone dvd player but I'm working on my computer please help me. For I have not understand the computer. When it's getting burn the creation of said process has no error 740 code.

  You are posting in the wrong Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• updates for microsoft vista KB2431831 and KB971029 will not install I get an error code 646

  The Microsoft Vista download KB2431831 and KB971029 will not install, I tried manually install all I get is error code 646

  the KB includes an automated fix this that solves the problem, look here: http://support.microsoft.com/kb/2258121>

  Let me know if this helped.

• error code 58 shows on msn connection. Where can I go with him to solve the problem

  IAM trying to connect to my MSN account but the error code 58 stop

  Hello

  Since you are faced with the question with the MSN account I recommend you post the same question to MSN support.
  http://answers.MSN.com/

• WMP 11 will not play my dvd downloads digital message error c00d2906 not support level of mandatory protection to decompress the digital file

  Original title: wmp 11 will not play my dvd digital downloads

  iGet an error message c00d2906 is not supported level of protection required to decompress digital file is there a fix for this problem

  Hi alfredDAVILA,

  ·         What is the format of the file?

  Follow the steps in the article.

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11

  http://support.Microsoft.com/kb/926373

  For reference:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions (Applicable to windows XP)

  Windows Media Player 11 cannot read content protected by DRM on Windows Vista

  http://support.Microsoft.com/kb/935336 (Applicable to windows XP)

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5268&ID=C00D11B1&ContextId=66&OriginalID=C00D2906

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• I get an error code 643, and it will not install updates due to these errors, why?

  I get an error code 643, and it will not install updates due to these errors, why?

  Hello

  error code 643:

  http://support.Microsoft.com/kb/KB976982

• When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  Hi Gore EzekiahTongun

   

  You can see the steps in the below mentioned article Microsoft and verification.

  http://support.Microsoft.com/kb/947366

   

  I hope this helps.