TSSTcorp TS - H6538 ATA Device / blank DVD + RW media-player rejects disc - what am I am I missing here?

Similar Questions

• CD/DVGW TSSTcorp TS-L632M ATA Device is not reading DVD

  Original title: TSSTcorp TS-L632M ATA Device CD/DVGW

  I have a HP laptop and have a problem with the DVD device. It doesn't read the DVD - RW. It shows me that the DVD is empty. I tried with DVD which worked without any week issue two or three, but now they are unable to read. I tried to use a Microsoft Fix it on the site, but it could not solve the problem.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 will not play sound with my DVD Windows media player

  I load windows 7 and changed to window XP. No sound on my dvd. I have not had any problems with it in windows XP. What can I do to get sound from my DVD?

  Hello

  
  1. is this a problem with all DVDs that play you in Windows Media Player?
  2. what format is this DVD in?
  3. do you have an error message when you play this DVD in Windows Media Player?
  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.
  Open the troubleshooting of Audio playback
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen
   
  Method 1.
  If other DVD play, the problem could be a scratched or damaged disk, or a problem of Codec for a particular disc.
  You might miss a decoder codecs or DVD. A DVD decoder is another name for a MPEG-2 decoder. The content on DVD-Video discs is encoded in MPEG-2 format, as is the content of the files DVR - MS (Microsoft recorded TV Shows) and some AVI files. To read these articles in the drive, you need a compatible DVD decoder installed on your computer.
  For additional information see the articles below.
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
   
  http://Windows.Microsoft.com/en-us/Windows/downloads/WMPlugins
   
  Method 2.
  You can also search on the World Wide Web using your search engine preferred codecs.
  
  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HL-DT-ST DVDRAM GSA - T40N ATA Device works like a CD player. It is supposed to be a DVD player?

  Hello

  First of all, I would like to thank you in advance for your help.

  I had the problem of my HL - DT - ST DVDRAM GSA - T40N ATA Device not reading anything into the drive and removed the filters. It is still not working properly, and it's the rare occasions when he did (after hitting enough lol) and I needed it to work again. I disabled the device and rebooted before her reactivation. Although it works now it has unfortunately fizzled. It is now only installed as a CD player and it used to be a DVD player. Before it stopped working TI played DVD 100% fine as well so it should be good.

  Here is some info on my laptop:
  Model: Acer Aspire 5920
  OS: Vista Edition Home Premium
  RAM: 3 GB

  If you are in need of any more information do not hesitate to ask!
  Thank you
  Jack

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.cdfreaks.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Error when you try to play a DVD: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  copy a group of photos w/music (Smilebox program) on dvd;

  After following the instructions of SMilebox to burn "images set to music" on DVD, to the attempt of DVD playback, I got following error message: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.  We live in the Washington area. I didn't know that DC was considered an unusual geographic region?

  Hey nongeekbetty,

  The DVD is encoded for a different region. Most DVD readers only works with DVDs that are coded for the computer was purchased in the same region. So if you buy a DVD in one country and then try to play on one computer from another country this DVD could not play.

  Step 1:

  Make sure that the DVD region is set to the appropriate region:

  a. Click Start.

  (b) in the search box, type Device Manager.

  c. right-click on the DVD drive.

  d. right-click on it and select Properties.

  e. make sure that the region will be resolved.

  For your information:

  http://Windows.Microsoft.com/en-us/Windows7/playing-DVDs-in-Windows-Media-Center-frequently-asked-questions

  Step 2:

  Also temporarily disable User Account Control (UAC) and check it out.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Note: Activate it once you are done with the check.

  Kind regards

  Savan - Microsoft technical support.

• I downloaded with Firefox; Windows media player plugin decoder and when I go to play dvd, windows media player tell me that my computer doesn't have a decoder installed.

  I downloaded with you windows media player decoder plugin and when I watch a dvd on my computer (I have the dvd) windows media gets up and tells me there is no decoder installed on my computer... I cannot also watch videos on utube, etc in the list of programs in the plug of your is listed as installed.

  Please see this page for a list of decoders that you could use for reading DVD http://windows.microsoft.com/en-US/windows/downloads/windows-media-player/plug-ins .

  If my answer has solved your problem, please click 'Solved It' next to this response when logged in on the forum.

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• DVD windows media player

  Windows media player cannot find son decoder or the windows media player, a device is emdomagee

  You posted in the English version of the Microsoft Answers forums. Please repost your question by selecting your language in the drop-down menu at the top of this page or by going to the international section of this Web page:

  http://www.Microsoft.com/communities/forums/default.mspx

  Translation of Bing above:

  You have posted in the version in English of the Microsoft answers forums. Please rest your nominal question either select your language in the drop-down list in the menu at the top of this page, or by going to the international section of this Web page:

  http://www.Microsoft.com/communities/forums/default.mspx

• No sound playing shape DVD Windows Media Player

  My question is this: when I play a music dvd, I have sound, but when I play a dvd movie, I have no sound, picture is great but no sound. Why? How can I solve this? I have no other problems with the sound, the only time where I have no sound when I play a dvd movie. It was working fine, now all of a sudden it doesn't work. HELP PLEASE!

  Windows Media Player

  No guarantee... but installing an AC3 Filter can be
  worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3 Filter
  http://AC3Filter.NET/wiki/projects/AC3Filter/releases
  (scroll down and try - AC3Filter 1.63 full b)

  Good luck...

• Not possible to burn mp3 file to DVD using Media Player 10 data

  Using Media Player 10 - I am unable to burn the mp3 file in a DVD (the file is too large for a CD) data, but able to burn MP3s to CD.

  CatherineS

  Except for Windows XP Media Center Edition 2005...
  Windows XP doesn't natively burn DVDs... you need third party software.

  The following freeware might be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  CDBurnerXP
  http://CDBurnerXP.se/

  (It's a free app
  to burn CDs and DVDs)

  CDBurnerXP create data disc
  http://CDBurnerXP.se/help/data/compiledata
  (the green bar at the bottom of the screen
  turns red if you add too many files)

• DVD windows media player does not work on my legitimate licensed Windows XP Sp3

  I have problems with my computer, playing DVDs on Windows Media Player...  I used the tool Validation of Microsoft and my copy of windows XP Professional Version 3 is legitimate... What I am doing wrong? My computer reads compact optical discs fine but DVDs are another story.

  I also had problems installing SQL Express Management Studio Express 2008 program on this pc.   Microsoft has a fix or I should by an Apple computer?
  '

  Hi Donald,.

  1. is the issue limited to Windows Media Player?

  2. they play well on other programs?

  3. you remember to make changes?

  4. what exactly happens when you install SQL Express Management Studio Express 2008?

  Follow this link and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Respond with more information so we can help you best.

• No video when playing a DVD in Media Player

  Original title: windows media player

  I hear a sound but I can't see a picture when I play a dvd

  Support for Windows Media Player for DVD playback depends on the presence of a supported decoder.

  Download and install ffdshow and check again the question: -.

  http://sourceforge.NET/projects/ffdshow/

  S.Sengupta Media Center MVP

• Creation of DVD Windows Media Player, Media Center, stop working

  I use Windows Vista and that you cannot use Windows Media Center, Media Player, Media Player Classic or Windows DVD Maker.

  When I try and play a video file for example, I immediately have an error message saying that "Windows Media Player has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. Same message for attempting to use one of the other programs listed.

  I tried to reboot, I checked for updates and Windows Vista Service Pack 2 installed and I used the Microsoft fix it solution to 'Windows Media Player stops responding after you install a third-party product that registers its own version of the Wmp.dll file' (using both the "fix it for me" and "Let me fix it myself" options).

  Unfortunately that I do not have a restore to restore point, my only option was to restore to the point before you install Windows Vista Service Pack 2, but my problem before this.

  Any help would be greatly appreciated! I think that the problem may have started when I updated a program, I used without any problems in the past ("Format Factory"), because I can't think of anything that may have done so.

  Thank you!

  Hello

  First of all make sure that WMP is really stopped, look in the Manager of tasks - right click on taskbar - task manager.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228
  ----------------------------------------------

  Then try the Startup Repair, then Chkdsk from the command here:

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Try runnng Chkdsk of Recovery Options
  (it of a more efficient way to manage to restart the computer and might work)

  This is the way to start however recovery, it's better.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------

  and, if necessary:

  How to perform a repair for Vista Installation - it is a reinstallation of the operating system, not even as a tool for system restart
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Rob - bicycle - Mark Twain said it is good.

• All sounds no longer works when I play DVD windows media player

  When I try to play a DVD in windows media player it is all stops sounds work including system sounds and sound in itunes. When I restart my computer the sound starts to work again, but when I try to play the DVD again once I get the same problem.

  Hello

  (1) do you have made no changes before this problem?
  (2) is what happens with all DVDs?
  (3) is the issue limited only with Windows Media Player?
  Run the FIXIT from the links below and check if they help.
  Method 1: Fix Windows Media Player video and other media or questions Library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/
  Method 2: Diagnose and automatically fix the audio problems and audio playback
  http://support.Microsoft.com/mats/AudioPlayback/
  Hope this information helps.

• I can't get my CD/DVD drive to eject the disc, what should I do?

  I can't my CD/DVD drive to eject a DVD disc, what should I do?

  http://www.ehow.com/how_2324559_eject-stuck-DVDCD-drive.html

  Straighten a paper clip and use it.

  http://video.about.com/pcsupport/open-a-stuck-drive-on-your-PC.htm

  A video about it.

  See you soon. Mick Murphy - Microsoft partner