Tuning 3883 by the attacker's IP

How can I fix GIS 3883 by the attacker's IP? Our server of virtual machines is triggering this alert when it hits cisco (probably for updates of GIS) so I want to set the sig, so it does take into account alerts issued by the server of virtual machines.

I don't see an option under "tune" for the signature of the attacker or victim IPs.

event action filters are used to subtract from stocks (not add) based on the filter criteria. It is very clear when you directly manage the probe, it is perhaps not so clear in virtual machines. Thus, you must create a filter event action for attacking intellectual property.

regarding the lowering of gravity... the only way to do that is by changing the specific signature.

Tags: Cisco Security

Similar Questions

  • Prevent or stop the attack without signature or signature disabled

    Hi IPS Expert,.

    Our IPS is always set as based signature and anomaly detection is not enabled.

    Is there a guideline that you can recommend to stop/prevent the attack without signature or signature is disabled.

    I understand that if the signature is not enabled, it will also create event or alert.

    This means that we will not have any idea when to stop.

    Kind regards

    Jhun

    Jhun-

    There are several reasons for which a signature can be disabled by default, but usually they are not active for a good reason.

    Signatures have a natural life span, they are created, tuned to detect variants of the vulnerability / initial attack. Later in their lives, once that vulnerability has been mostly fixed or patched, they can be disabled. Once they become rather old to have little use for all they retired.

    Other reasons a signature can be disabled, but that signature translates into a high rate of false positives. If you have someone perform analysis on the events that generates your IPS, you will waste their time and their talent with no productive events. It is the most common reason that a signature is disabled in an active sensor.

    The last reason, maybe you want a signature (or a family of signatures) disabled, it is that they do not violate security policy you. If your organization allows peer-to-peer file sharing they that you wouldn't need signatures to stop this activity.

    -Bob

  • How can I disable a site of the attack that opens when I launch my browser, I use a Mac OS 10.6.4?

    How can I disable a site for the attack which opens behind my home page whenever I launch my browser? I'm on a Mac OS 10.6.4

    URL of affected sites

    http://www.therugged.com

    Restore default homepage

    1. in the menu bar on top of Firefox, select Tools | Preferences

    2. make sure that you are in the general group

    3. click on restore default

    4. Finally, click OK

  • How can I decrease the attack on all hard returns?

    How can I decrease the attack on all hard returns? I have a paragraphs that attack 12pt, but I want 8pt leader on yields. Is it possible to change them all at the same time? I know that you can increase them using the space before and after tabs. They allow you to only go to 0 "and from the top, but not in the negative.

    I thought about it. Instead of having two hard returns I just used an and use space after. I used the space after and before bad option. Thank you.

  • Why my line does not move when changes to the attack?

    I hope I can explain it properly. I have a text box that contains several paragraphs. I want different for some of the paragraphs. When I select the paragraph I want to change and reduce the attack compared to the "auto" setting, paragraph lines clogged, but the whole paragraph moves upward. I have tried everything I can think and it just doesn't work. I can increase the attack and that works, but I can't decrease.

    I use InDesign on Mac OS 10.6.8 7.0.4

    Thanks in advance!

    I found your question because I had the same problem. I fixed it by four times by clicking on the text to ensure that it has been selected. A good explanation of why this works is here: http://indesignsecrets.com/reigning-in-rogue-leading.php.

  • Help, making the attack on character

    Hello, Im trying to make my character attack, the attack animation is located in the clip of character on frame 4. But I don't understand how to do it? I want him to attack once, if you press SPACE.

    I tried this:


    		{if (Key.isDown (Key.Space))}

    		this.gotoAndStop (4);

    Here is my code on my MovieClip of characters

    onClipEvent (load) {}

    gravity = 10;

    Scale = _xscale;

    6 = walkSpeed;

    maxjump = 0.2;

    }

    onClipEvent (enterFrame) {}

    If (air == true) {}

    FLF += gravity;

    State = 3;

    }

    If (Key.isDown (Key.LEFT) & &! _root.leftbound.hitTest (_x, FLF, true)) {}

    _x-= walkSpeed;

    _xscale = - scale;

    }

    If (Key.isDown (Key.RIGHT) & &! _root.rightbound.hitTest (_x, FLF, true)) {}

    _x += walkSpeed;

    _xscale = scale;

    }

    If (_root.ground.hitTest (_x, FLF, true)) {}

    Air = false;

    } else {}

    Air = true;

    }

    If (Key.isDown (Key.UP) & & jump == true) {}

    FLF = jumpSpeed;

    }

    If (air == false) {}

    jumping = true;

    jumpcount = 0;

    jumpSpeed = 22;

    }

    If (Key.isDown (Key.UP)) {}

    jumpcount += 1;

    }

    If (jumpcount > maxjump & & jumpSpeed >-2) {}

    jumpSpeed-= 2;

    }

    If (air == false & &!) Key.isDown (Key.LEFT) & &! Key.isDown (65) & & < 4 or air _currentframe == false & &! Key.isDown (Key.RIGHT) & &! Key.isDown (65) & & _currentframe < 4) {}

    State = 1;

    }

    If (Key.isDown (Key.LEFT) & & air == false & &!) Key.isDown (65) & & _currentframe < 4 or Key.isDown (Key.RIGHT) & & air == false & &! Key.isDown (65) & & _currentframe < 4) {}

    State = 2;

    }

    If (!.) {Key.isDown (65))}

    gotoAndStop (state);

    }

    _root.statetxt = State;

    }

    onClipEvent (keyUp) {}

    If (Key.getCode () == 83) {}

    jumping = false;

    }

    }

    The code you showed for the SPACE key should work.  If you try only instead of all the code you show that you should see gotoAndStop (4).  If it does not, then it is possible some other code you have is forced to do something else.  If the problem is that she goes to 4, but that he never leaves, then you need to add in another condition.

  • Our website gets a red screen, the 'attack page' when accessed via Firefox, but not learn it happened on many computers. Can you please tell me what is happening and how to fix it?

    Attack page! Since Firefox, but not know

    What happened when Google visited this site?

       Of the 5 pages Google tested on the site over the past 90 days, 2 page(s) resulted in malicious software being downloaded and installed without user consent. The last time Google visited this site was on 2011-11-05, and the last time suspicious content was found on this site was on 2011-11-05.

       Malicious software includes 1 scripting exploit(s), 1 trojan(s), 1 exploit(s). Successful infection resulted in an average of 6 new process(es) on the target machine.

       Malicious software is hosted on 2 domain(s), including passinggas.net/, delicatecurrant.mysecondarydns.com/.

    Works for me in Firefox 3.6.x and 8.0 Firefox and Google Chrome.

    What is the current state of the list for www.divisionofpsychotherapy.org?

    This site is not currently listed as a suspect.

  • Protect the attack offline SAM

    How to stop a child from 13 years to download a Win Pass Crack free util and reset the admin pass?  OK - I can't better question - how to protect the db SAM of such attacks.

    24 hr armed guard is not an option.

    If you are using Windows Vista Ultimate or Enterprise, then you have a feature called Bitlocker, then you could enable and encrypt your hard drive and make sure that you back up the key and put in a safe place. But if you use a different version then you should boot into the BIOS at startup you should press a key (refer to the PC Guide to learn how to get started in the BIOS and use). Then disable the boot with CD/DVD, removable devices and network only that boot from the hard drive is available.

    Then set up password on the BIOS.

    After that, lock the computer case that could NOT be opened.

    Then, it won't work.

    In fact SAM could protect themselves if the OS is on, but before start, you must encrypt the hard drive or do only with a hard drive to boot.

  • System cleaned after the attack of virus/malware using 6 recommended tools - 90% of the system is back to normal, but most of the options in the custom of open Control Panel!

    The system was attacked by a virus/spyware. Microsoft Security Essentials has been installed after that - it found nothing after a comprehensive analysis. Malwarebytes Anti-Malware has been installed, it is the largest part of it and removed. Norton 360 has found rest. SuperANTISpyware has also been installed and this has also nothing after a system scan. Then ATF Cleaner and CCleaner were used to finish with what anyone else remaining areas may be temporary.

    So right now the system is more or less fine - programs running, the internet works etc. However when I open the control panel and click on a bunch of things for example Security Center, Sound, customization etc - they open habit. You see that the cursor turns into the blue circle for a fraction of a second and then more nothing. No window opens and closes or whatever it is. Now, I assume that the pieces of the virus/spyware are still active but with all tools using the latest definitions not being not able to find anything like that, I wonder if it's just a case of something having disabled those elements and not them reactivated after cleaning. The reason why I don't think it's something malicious is also because some options such as the Windows Firewall, the Manager of devices and programs and features open and work properly. Any other malicious software would certainly avoid these access as they could help shorten.

    Please help, thanks!

    Hello

    References to Vista also apply to Windows 7.

    Make sure that system is really clean before doing this.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
    turn it back on.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    --------------------------------------------------------------------------

    After the foregoing:

    What antivirus/antispyware/security products you have on your machine? Include everything you
    ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
    questions.)

    Search all .cpl files most will be in "C:\Windows\System32" However, you can have
    others. Click on each of them at a time and see if it does not start - if so right click on it and
    Rename using cpZ as the extension is is to find it. Try Control Panel - if no Dungeon of joy
    try all the .cpl files. (Note that other people find other subfolders under C:\Windows should
    not be judged because they are not active.)

    Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and
    others.

    Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center,
    or games in Windows Vista
    http://support.Microsoft.com/kb/936686/en-us

    The Control Panel window will not open in Windows Vista
    http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

    =====================================

    If necessary:

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
    Be sure to do a good backup or three.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    Check with your system manufacturer that they all slightly different methods. They may have
    included a recovery Partition or other methods to restore the default value. As the manufacturer of your system
    We will sell you the physical disks cheaply since you already own windows.

    I hope this helps. Rob - bicycle - Mark Twain said it is good.

  • After the attack of virus cannot activate Windows Firewall

    Something has attacked our copmputer. We have done several virus scans to correct the problem, but we cannot yet turn on the firewall on, what can be the problem?

    Hello

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and use scanners online and other methods.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    AdwCleaner
    http://www.bleepingcomputer.com/download/adwcleaner/
    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Scan online ESET
    http://www.eset.com/onlinescan/

    Scan Kaspersky online
    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ======================================

    If necessary AFTER THAT you are sure that the machine is clean of any malware.

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • files and folders invisible after the attack of virus on the external HARD disk

    I have an external Seagate 500 GB HDD.
    Yesterday I plugged on my friend's laptop computer, but her laptop has been attacked. I didn't know it. so I just copied the files on my HARD drive.
    After connecting the HARD drive to my laptop, I've scanned several times, but only one file or folder is not visible in it. And I checked the properties, its display used and remaining memory on the HARD drive.
    Not what happened? I want historical data... How can I make them visible?
    Help, please...

    Hi Muralidharpattar,

    This problem normally occurs when permission for files/folders have been modified and may be hidden.

    Method 1: We will connect the hard drive and try to check if files and folders are hidden or not.

    Show hidden files

    http://Windows.Microsoft.com/en-us/Windows/show-hidden-files#show-hidden-files=Windows-7

    Method 2:

    If the problem persists, I suggest you analyze the external hard drive to see if it is operated by the virus and malwares. If you have any antivirus program that is not built, you can run scanning using it. If this isn't the case, you can use the provided scanner.

    Step 1:

    Start your computer in safe mode and check the number.

    To start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2:

    Run a scan antivirus on your computer.

    www.Microsoft.com/Security/Scanner

    Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
     
    Hope this information helps. Response with status so that we can help you.

  • Clean? Windows 7 restarting on formatted drive, 100 MB Partition not allowed no previous operating system, after the attack of virus, it reach the wifi drivers to not load or display in the new operating system?

    Left attack virus serious that some files disabled in windows 7 (protected by Microsoft Security Essential) a program used on the computer was left partially disabled and I continue when using wireless internet. Reformatted drive leaving 100 MB Partition intact, created in new OS was an old file of Windows not wanted, impossible any attempt at the value of the days of updates, downloads & allowing also noticed wifi. Another reader reformat leaving 100 MB partition again not affected since the original OS. All programs loaded & all updates succeeded, but still did not have through any discussion read to get the computer to WiFi wifi as in Starbucks invites you to discover. I have another operating system on the computer that is able to discover drive internet wifi from loading with windows 7 so not a hardware problem, I think. Question is can a formatted drive on the left with its original partition of 100 MB OS questions with new reloaded windows 7 and is the new installation of the operating system clearly & repopulate this partition of 100 MB for no bug cannot continue to corrupt and better performance? Thank you all.

    A new installation of windows 7 can be said to delete this partition. do you when you get to the section "where do you want to install windows?" in installing windows 7. There is a player options button that allows you to delete both partitions... then create 1 new partition for windows and it throws a message saying that the operating system can create additional partitions... blah blah... and she... that way the 100 MB partition is clear. MyPcHealth - free tools

  • Bluetooth (a Broadcom? 750) do seems not in system devices, after the attack of Trojan on the computer

    Original title: after a Trojan attack the bluetooth card has not been activated. 2486635/KB/patch has not solved the problem described...

    Hello

    The kb/2486635 described the lock of the hang the devices and printers:
    Window devices and printers stops responding (hangs) after that you turn off the Bluetooth Support service in Windows 7 or in Windows Server 2008 R2 the patch have not changed anything.

    Additional information that I can give (from my system) are:

    1. Bluetooth (a Broadcom? 750) seems not in system devices
    2. When we stop at theDevices and printer window hanging (using the Red Cross)
      Enumerator of devices and printers
    3. It is impossible to define any device and win7 does not have anyone.
    4. It is possible to define a printer, but it can be entered through the window, they appear in the list of printers available by print function in software. It prints normally.
    5. When I try to connect an external USB device to bluetooth it had been recognized, more it seems that broadcom bluetooth card was temporarily too and worked for the transfer of data. After no restart of the system or the USB and the internal are none recognized more, anywayv (check reconnect the external effect, ignored device into any usb port).
    6. Reinstalling broadcom driver had no effect.
    7. I couldn't find anything bad (to my knowledge) in the BdR.

    Since that time (two months ago), I have no more Manager of devices and printers.

    Best regards

    Trebly

    Hello


    You can follow the procedure.
    You can first try to enable the administrator account by default on the Windows recovery environment. Follow the steps.
    Activate integrated admin system recovery options.
    a. click on the system recovery options command prompt.
    b. at the command prompt, type net user administrator / Active: Yes and then press ENTER.
    c. type net user administrator , and then press ENTER.
    Note: Please replace the tag with passwords which you want to set for the administrator account.
    d. Type exit and press ENTER.
    Once you enable the default Administrator account, you can log on to the default Administrator account, and then try to copy data from the old (corrupted account) user account to the new user account (that you created previously).
    Note: do not copy the ntuser.dat and .ini files.
    Once you copy the data from the old account to the new account, disable the built-in Administrator account.
    To disable the default Administrator account, follow the steps.
    a. click on the system recovery options command prompt.
    b. at the command prompt, type net user administrator / active: no and then press ENTER.
    c. type net user administrator , and then press ENTER.
    Note: Please replace the tag with passwords which you want to set for the administrator account.
    d. Type exit and press ENTER.

  • can I use "Oracle Database 12 c: performance management and Tuning" training for the certification "Oracle Database 11g: Performance Tuning 1Z0-054 '"»

    I took "Oracle Database 12 c: new performance management and Tuning" the oracle University training. Now I would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054 ' exam. Is this possible?

    I guess you ask if you can use the course 12 c as long as the condition of course for the review of 11g.  Over 12 c is not listed as one of the options for the 11 g certification and course requirements are normally specific version - at least with DBA certifications.  If you are already an Oracle OCP DBA, of course, there is no requirement of course for the review of performance tuning.  From what I know the training requirements for other certifications, I do not that you will be able to use it. However, Brandye will provide a definitive answer to whether the course 12 c would be acceptable for 11g certification.

    That said, I'm with John - 12 c review is about a community of 85 to 90% in the review of the 11g and is currently about 20% of the price while it is in beta.  What is the point of trying to cross the releases?

  • Index and tuning: Linking on the same table

    Hello everyone,

    I have a PL/SQL mechanism that is based on a select query which links a table (T_RECHRED) on himself.

    Here's the SQL...

    SELECT
    DR. LSZ, DR. RECH_ID RECH_ID, GS. RECH_ID GS_ID
    Of
    DR. T_RECHRED, T_RECHRED GS
    WHERE
    DR. DATE_FROM GROUP GS. DATE_FROM
    AND DR. BILL_AMOUNT = GS. BILL_AMOUNT *-1
    AND DR. LSZ = GS. LSZ
    AND DR. ALNR = GS. ALNR
    AND DR.CAT! = 'GS' AND GS.CAT = 'GS '.
    ORDER BY
    DR. LSZ CSA, DR. POSITIONSTEXT1 DESC;

    As you can see, the table is joined to itself with the following fields...

    DATE_FROM, LSZ, ALNR and BILL_AMOUNT (with GS having the dial-up sign)

    Both sides of the join (separation) selection is on the cat 'IS GS' c to one side and 'NOT GS' for the other side. The selection of GS catches / selects several hundred thousand lines, while the 'NO GS' selection selects several million lines.

    This query (and the accompanying PL/SQL process) works very well...

    -Reduces data volumes
    -With the following filter...
    AND GS. RECH_MONTH IN (200809, 200810)
    ... which returns the same amount of data as a select complete!

    ... but seems to work constantly on the volume of data.

    The really stupid thing is that I had run it once (full volume) but have reshaped the tables and somehow fail to replicate the index configuration that I had before (it's really stupid of me!)

    So, my question is the best way to address such a request?

    My thoughts are these:

    -J' have my filter clause in the right order? The "GS.CAT = 'GS' is the most 'limit' filter so I put this last." Is this correct?
    -Do I have to put the joints in a "INNER JOIN" clause (leaving the "Cat" filter in the WHERE clause), or it makes no difference?
    -Is that the join on the BILL_AMOUNT with the sign reversed (*-1) impact on performance?
    -J' would have separate index (on each join column)? Or I should have an index composed on the join fields all (or almost)?
    -The ORDER BY clause is important (and cannot be deleted) because the PL/SQL depends on a concrete order.

    I've been googling and reading my book "Oracle Tuning" but can not find all the information on the links between the tables on themselves.

    Advice you can give me on this, or links to the 'case studies' or 'HOWTO', would be welcome.

    Thank you very much
    Alan Searle

    PS: I tried to run a "explain plan" and that seems to work through OK but no data (as far as I can see) is written to the "PLAN_TABLE. Any ideas what I'm doing wrong here?

    version of database? I suspect 10g or higher.

    explain plan is now written in a global temporary table, it must be explained and look in the session.

Maybe you are looking for