' Turn off display "intermittently stops working.

Similar Questions

• my computer cut enexpected, he said my display driver stopped working?

  I have a Compaq Presario with windows vista, 32-bit. I was on the computer and it will stop unexpected because it says that my display drivers stopped working. my computer turned off and rebooted, now I have to do? It happen if I do nothing? I don't even know whaer my display drivers are found, please help.

  Hello

  This error can occur because of an outdated video driver in many programs running at the same time or same high CPU activity.

  I suggest that you follow the steps in the following article and update us with the results.

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2665946

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Let us know if it helps!

• detected external display suddenly stopped working - displays black screen

  original title: detected external display suddenly stopped working

  Hello

  I have searched in several forums, but have not been able to completely solve this problem.  It has been set provisionally and has not yet.
  This system I have:
  HP TouchSmart tx2 tablet pc with Windows Vista Service Pack 2 x 64-bit (Home Premium)
  AMD Turion (tm) X 2 Ultra Dual-Core Mobile ZM - 82, 2.2 GHz
  ATI Radeon HD 3200 graphics card
  I have been working for more than a year with a monitor flat screen Dell ST2310 external monitor and works very well with the setting "use external display only.  From one minute to the next two screen went black so I forced a restart and again the same problem.  I decided to manually disconnect the external monitor by unplugging the VGA cable from the laptop that turns on automatically to the main display as it would if I am disconnected display.  When I connected the VGA cable again the same question in the two screens were entirely black.  I unplugged once more the VGA cable if I could change the settings in Windows mobility.  I plugged back in the VGA cable after changing the settings of "external display only" to 'mirror' devices and after playing for a bit, with the Windows Mobility Center, I had the external display to work again my regular settings: "external display only.  This solution lasted a day and now works in the main screen and the external screen is completely black.
  I tried in vain to solutions:
  -Change VGA cables continues to experience the same issue.

  -Tested according to the specifications and Dell monitor Monitor works fine if the backlight is not the problem.
  -Records update for ATI Radeon HD 3200 graphics card and driver generic PnP Monitor and Dell ST2310.
  -Uninstalled ATI Catalyst Manager and re install now as AMD Vision Engine Control Center.
  -Checked AMD Vision Engine Control Center recognizes the connected external display.
  -Uninstalled the driver Dell ST2310 and re installed the driver.
  -On the screen settings have tried to extend the desktop on the external screen (second)
  Now, this is what's going on and don't know how to fix it:

  -Windows Mobility Center detects a monitor external, even when the VGA cable is disconnected.

  -When it detects the external display it sometimes detects it as DELL ST2310, sometimes as a generic Non - PnP monitor.

  -Sometimes under "Monitor" in the Device Manager, there are several monitors generic Non - PnP contained also the Dell ST2310 and generic PnP monitor.

  -When the external monitor is connected, the screen is completely black and does not work even after changing the settings Windows Mobility or Fn F4.
  Help!

  Hello
   
  I also suggest you to update the BIOS. Visit the manufacturer for more information.
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  WARNING:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  See also: http://h10010.www1.hp.com/ewfrf/wc/document?docname=c01881110&tmp_track_link=ot_recdoc/c00678157/en_us/c01881110/loc:4 & cc = us & dlc = en & lc = en & product = 352607 #N624
   
  Thank you

• Equium A100-338 display has stopped working

  Hello

  I have exactly the same problem on my Equium A100-338 loaded with Vista.
  The display has stopped working (he went to a poorly lit black screen) after I had rebooted my machine even if the computer and the hard drive seems to work Ok with the lights on. I tried the usual elimination of power and the battery and restart it tricks, but after initial success it has stopped working after a few weeks.

  Once I had the computer operation that I only closed it down in the mode 'sleep', and he continued to work for a month until that he should be released after a windows update. I then plugged an external display and use of the Fn + F5 key got the external display running.
  Low and behold, the screen of the laptop started working again as if it had been "energised".

  I took what the laptop screen was OK and that he would not need replacement.
  The laptop worked OK until it needed to restart another when the unrest started again. The screens are gray on the monitor and the laptop now.

  These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  Now, I bought another laptop Toshiba Satellite to connect to the forums trying to find out if my original computer can be repaired
  These problems seem to be quite common on Toshiba computers.

  Any help members would be welcome.

  > These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  For the most part a graphics card driver must be reinstalled or updated to a newer version it can also be a problem of OS which means that the new facility could help
  But try to update the display driver

• Display has stopped working on Satellite A300

  Hi guys,.

  I have satellite a300 PSAg4a - 02500 m laptop. All of a sudden the display has stopped working on the laptop. I tried to plug in an external display, but it does not work also.

  I can't even see the bios screen not. Laptops normally, I hear no beeps during startup, just the fact that there is no display.

  This laptop has a M86 ATI graphics card 512 MB. Its out of warranty.

  All had a similar experience. Is it possible to know what could be the problem.

  Any suggestions would be helpful.

  Thank you

  Hey Tama

  I'm afraid there is a problem of serious material with your laptop from m.
  I like the graphics card problem.
  Usually if the internal screen would be defective, you should see all the external display. This is why I think you GPU is affected.

• I get the following error on my windows XP pc _ "ialmrnt5 display driver stopped working properly" my police doing real big and I have to restart my PC

  I get the error message on my Windows XP pc
  "ialmrnt5 display driver stopped working properly" my police doing real big and I have to restart my PC

  How can I solve this problem?

  What do you do when this happens?

  You can try to find an updated driver and then update your driver to determine if it solves your problem.

  Take a look at this article by Intel: http://www.intel.com/support/graphics/sb/CS-009483.htm

• nvlddmkn display driver stops working, how to fix?

  display driver stops working when you play

  Download and install the latest nVIDIA Driver:

  http://www.nvidia.com/download/find.aspx?lang=en-us

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• What can I do if my lap suddenly profit and loss and say display driver stops working?

  Well, I have windows 7.   Sometimes when I open my browser, my laptop suddenly stopped automatically... and soon end up... in fact it says "DISPLAY DRIVER STOPS WORKING AND SCRAP with SUCCESS".

  There is a big problem on my lap?  pls help me... thanks

  Hi Shara,

  1 did you changes to the computer before the show?
  2. what browser you use to access the Internet?

  3. you get this error message while trying to open the web browser?

  This problem may occur for one or more of the following reasons:

  a. you may need to install the latest updates for your display driver
  (b) Visual effects, or too many programs running in the background may be slowing down your PC
  c. the GPU takes more time than allowed to display graphics on your monitor.

  Note: If you use an older video card, it may be a video driver that is fully compatible with your version of Windows.

  Please refer to the article to resolve the problem:

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
  http://support.Microsoft.com/kb/2665946?WA=wsignin1.0

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry in Windows 7, see http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• How can I turn off display tab page in Reader?

  How can I turn off display tab page in Reader?

  Found.  Thank you. To disable the display of the tab, open Acrobat Reader DC, navigate to the Edit-> Preferences-> General-> uncheck "documents open in the new tab in the same window".

• Envy laptop: my notebook of envy not turn off when I stopped in Windows 10?

  Hi all

  I tried everything to get my HP laptop work properly.  I am a computer programmer and my laptop not stop using the power HP power and sleep, using Windows 10.  I have to update the display driver, I tried different settings in the HP power settings and still no luck.  I have never seen anything like this before.  All my drivers are updated etc.  I'm about to give this thing!  When I select my phone stop Windows 10, should close and doesn't have the power button / light on.  When I try to go back on my laptop, it is dead and I hold the power button for about a minute before it turns off so I can restart the laptop?

  Thank you

  Mark

  Hi Mark,

  You've already tried this, but if not, it's definitely worth it.

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Windows 7 starter edition: sceensaver not committed and does not turn off display

  I have Windows 7 starter on my Acer Aspire One.  The display has stopped turn off automatically (as it is supposed, by the power settings) when the computer has been sitting idle for some time.  I checked the power settings several times, as well as turned on the screen saver (but it won't commit).  I checked the display drivers & they are up to date.  I have not all connected devices that might wake the computer.  I have not installed new software recently and have any kind of function "awakening."   l normally play music by the bias of Windows Media Player or stream music online (Pandora and live365) when I fall asleep and so don't want to close the lid, but want the computer turns off the screen so that it would light up the room all night.  Please let know us what could go wrong.  Thank you!

  Hello

  Method 1: Run the troubleshooter of power

  You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:

   

  Follow the post proposed by Serge D.

   

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/screen-saver-display-power-off-Don ' t-work-when/498b768d-c786-4741-81d4-28d6d189a88f

   

  Hope the above information is helpful.

   

• Satellite Pro U400 - 150 - display has stopped working

  Hello guys,.

  yesterday I used to turn on my laptop (Satellite Pro U400 - 14) and it worked fine but after 1 minute my screen stopped working. I tried to restart the PC, and it worked OK again. But I turn on my laptop today and it didn t work at all. Everything is OK, PC works fine, everything is good, but only the display is black.

  I Don t know what happened with my laptop. :/

  Is there anyone who knows the answer to this problem?

  Thanks for all your answers.

  > Everything is OK, PC works fine, everything is good, but only the display is black.
  Of course, this isn't all right if nothing appears on the screen

  Connect an external monitor to check if you would be able to see something on the screen?
  Do this! Usually you should use the FN + F5 to alternate between the monitor internal and external.
  If this is not possible and nothing could be seen on the 2nd monitor, the graphics card problem can cause this.

• How can I turn off display on MacBook Pro when it is connected to the external display?

  I recently bought an external screen made by HP and I have a problem. When I connected it to my MacBook Pro, I would like to turn off the display on the MacBook Pro completely, because it is a loss of power. I tried to turn the brightness all in low, but who is not actually turn off the display. Also, I tried many commands found on the web Terminal, and none of them does not seem to work. Does anyone know a solution?

  All responses are greatly appreciated.

  Test

• Never turn off display

  my screen automatically goes on standby every 1 minute. I tried to go to control panel (change power settings).  I went t maintenanace of system in Control Panel. He always does.  Can anyone help.  I want my screen to be open 24/7.  He falls asleep all 1 minute while I watch a movie.  I have to scrible wake him mouse. can anyone help please

  Hi Ron21,

  1 when was the last time it was working fine?
  2. did you of recent changes on the computer?
  3. the problem occur only while watching a movie?
   

  Follow the steps mentioned below:

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  First, see if the problem occurs after Disabling the screen saver (by selecting the screen saver 'None'). If the problem persists, please turn off the sleep in the BIOS. To check the BIOS settings, please consult the user manual or contact the manufacturer of the motherboard.

  In addition, please set the following group policy and see if the problem can be solved.

  (1) please click Start, type group policy in the search box and press ENTER.
  Expand the following item: Computer Configuration-> administrative templates-> system-> power management-> video and display settings

  (2) double click on "turn off the display (plugged).

  (3) change the setting to "Disabled".

  4) click OK.

  (5) repeat step 4 or 5 to disable "turn off the display (on battery).

  In addition, you can test clean boot and see if the problem occurs. If the problem goes away in the boot environment, we can use a 50/50 to quickly refine approach which entry is causing the problem.

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/power-options-set-power-options-to-never-turn-off/f784ed6f-A594-496a-A850-553f3e18d00c

  Reply back with the results

  Referring to the link: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/b769d9b4-300e-4066-b071-da54926112d2

• Cannot turn off display on the Qosmio G-series

  Since loading Vista, Alt + F5 keys no longer work to turn off the screen. All ideas welcome.

  Hello

  that you have installed the version of value added package 1.1.7 for your machine?

  It s available for download in the Section download Toshiba Drivers, so if it is not already done, please take a look here and download the VAP (ValueAddedPackage) to make your keys working properly.

  Welcome them