Turn off the LEDs in the structure of the case

Hello

I was wondering if someone could help me solve a problem in a software test bench that I am developing. I have attached some of my code in which the problem is visible. I have a business structure that is triggered by a 'push button '. I want the TEST that is currently RUNNING LED remain lit until the end of the execution of the case structure (condition true) then shuts down once it is completed. But the LED does not turn off and remains lit. Is that what I can do in the condition False to activate the LED is off when the code is not running. Please note that to run the program, you will need to "run continuously. I want until the led turns off after getting the 'result' so that the software operator can know that he is free to perform the next test. But now when the 'Start Test 2 "is executed after 'Start Test', the LED stays on.

It might be a simple solution that I can be not familiar with, but forgive me, I am a new user of Labview and I could not find a solution to this online.

Thank you.

Kind regards
DPAC

Hi DPAC.

simple solution as requested:

Tags: NI Software

Similar Questions

  • Can I turn off the heart rate monitor (LED diodes)?

    My skin is very reactive and tried these types of devices before (Fitbit etc.) and I ended up with a rash on my wrist under the LED Strip. Can it be disabled if necessary on the device?

    Hello

    To turn off the heart rate monitor:

    -On your iPhone, in the application of Eve, go to: Watch My > privacy > Motion & Fitness > disable the heart rate.

  • How can I change/turn off the led under the speakers on Satellite P100?

    How can I change/turn off the led under the speakers? (in Satellite P100 (PSPA6E))
    Now I see the light only in the left side, but when I bought the computer left and right led line lights blue under the speakers.

    Gazz's right. It is not possible to switch off the LEDs. If just one LED is on the other must be faulty. Contact the customer Service of your country partner. I'm sure they can disconnect one too if you n t need her.

  • Portege M800: How to turn off the LED light of the multimedia and the touchpad?

    Hello

    I have Toshiba Portege M800.
    I want to know, how can I turn off the light of multimedia and the touchpad
    Thanks in advance

    Hello

    I m not M800 owner but I ve got an another Toshiba laptop and these LED lights I can turn market in the BIOS and in Toshiba HWSetup.
    The HWSetup is placed in Toshiba help optimize them and the settings are in the tab 'enlightenment '.

    See you soon

  • How to turn off the blue LEDs under the speakers on Satellite P100?

    Hello

    I have a P100-143. The laptop is great. How can I turn off the blue LEDs under the speakers? It's very scary and absolutely useless. If anyone has a solution, please share it. THX.

    Hello

    AFAIK there is no switch or something similar. I presume that the only solution is to cut the cable.

  • Turn off the charge LED - Z5 Compact

    Is it possible to turn off the LED during charging, I would like to have my phone next to the bed at night.

    Haha I was wondering what... I have just turn My Phone works fine

  • Cannot turn off the LEDS on Cisco Aironet 1141

    I am trying to turn off the LED on a Cisco Aironet 1141 p/n AIR-AP1141N-A-K9.  It is a standalone AP and the CLI I publish this command:

    turn off the display of #led AP (config)

    The light does not go out after you type this command.  If I "run" it appears in the config so that the order has been accepted.  Is there another way to turn off the LED?  I'm under JA1 IOS Version 12.4 (21a).

    If you have the AP 1141 under warranty, you can send an email to [email protected] / * / PA serial number and they can post you the picture ask you.

    You want to say "Thank you"?
    Ne. Just note the useful responses,
    It is more useful than 'thank you'.

  • Turn off the charge LED

    Is it possible to turn off the light when loading? I try to use the official magnetic charging dock, but the light is too bright to sleep. I have to resort using the usb cable to the phone backwards.

    It doesn't seem to be a solution to this without rooting. It makes the official charger unusable for me.

    I can't be the only person who sees this as a problem.

    I managed to luminous flux set up red load notifications. Little a bodge but it works until the patch Sony.

  • My 5s torch lights up when a message arrives... How to turn off the it

    My 5s torch lights up when a message arrives... How to turn off the it

    Check: Settings - general - accessibility - Flash LED for alerts = Off.

  • How to turn off the backlight on Satellite U400?

    Hello. somehow, I can't disable the led backlight. the button at the top of the keyboard that is planned to do now turns off the volume.
    I don't know what caused this problem, perhaps win7 upgrade.

    Is it possible to turn off the backlight, in case the planned key does not work?
    Thanks for help.
    Concerning

    As far as I know you can disable it using Toshiba HW setup utility.
    On the desktop click Toshiba Assist (hopefully, you have preinstalled it on your laptop) > Optimize > Toshiba HW setup > check if the lighting of the tab is available.

    If Yes use OFF option and confirm with apply.
    This should help you.

    You can also check the advanced settings of the BIOS. If I remember well this lighting option can be also turned off it.

  • Satellite A660 how can I turn off the light on the power button?

    Hello, I recently bought a new Toshiba A660-1FL.

    However mind, lighting of the multimedia keys, if I work in the dark.
    In the Bios, I could disable the led lighting, but the on/off switch is always lighting, which distracts me when I'm working.
    This laptop has two power LED, so the lighting power is in my view, unnecessary.

    My question is: How can I turn off the light on the power button?

    Hello

    The power button led cannot be disabled.
    It s there if the laptop is turned on.
    The lighting in the BIOS option only controls the multimedia keys...

    Welcome them

  • How to turn off the lights under speaker on Satellite P100?

    I need to know if it is possible to TURN OFF the blue led underlight. (under the harman/kardon repro)
    laptop SATELLITE P100-387
    I dod not find it in Control Panel.

    Help, please

    Hi petr

    No, it of not possible to disable the legal average speaker lights.
    I guess it could be possible to detach any connection cable or something similar, but it would avoid your warranty!
    I put t really recommend doing that!

    I would not risk my warranty

  • How to use a cursor to turn on or turn off the lights

    Hi guys. I'm quite familiar with Labview now, but can't seen to get my head around this problem. I have a slider that is numbered from 1 to 10. under the cursor, I inserted 10 LED lights. My sister in order to use the slider to turn off the lights and. for an example, when I set the cursor to one, at the far left light should go. When I put the cursor at 2, the first witness should go second light next to him, and the model continues. I thought to use the number of table boolean, but it doesn't seem to do the trick. could you please help me. I join the basic layout how I wanted things to be arranged

    Kind regards

    Joe

    Maybe something like that?

  • Could turn off the light of State Aironet 1130?

    We had an Aironet must installed on darkroom but its status LED continues to blink. We could turn off the LED set up? As I knew that this access point can be set continuously flashing the LED State.

    There is no way I know to turn off the leds. The only hidden command is one that allows their flashing of the cli and change the duration of each, but it won't stop them. Insulating on the leds tape is probably your only option.

  • Menu error when turn off the DVD (CS4)

    Hello Adobe community

    I recently created a DVD in Adobe Encore CS4. It has two menus. The menu title has two buttons: Play driver (which connects to a minute 25 TV pilot) and Extras (which connects to a root menu). The menu root contains three music videos (which all the link to the main menu) and a main menu button (which has links from the menu title). I burned the Encore DVD and it played on my DVD player at home. Everything on the DVD works great (menus and videos). However, when I am on the title menu, and I turned off the DVD drive and turn it back on (with the disk still inside) something strange is happening. The menu suddenly compressed horizontally, and the buttons no longer work. Play, up, down, enter, none of the remote controls work more. The only way I can get the DVD works again is to insert a DVD completely different summer and then insert again my DVD. Then he is back to normal.

    I included two photos to illustrate what is happening.

    The DVD is in 16:9 mode, however the TV I watch on 4:3.

    IT IS WHAT THE MENU TITLE LOOKS LIKE WHEN I INSERT FIRST THE DVD: ALL THE WORK OF BUTTONS/LINKS/NAVIGATION... EVERYTHING IS GOOD.

    menu.JPG

    WHEN YOU TURN ON THE DVD MARKET AGAIN (AT THIS POINT), THE MENU BECOMES SQUASHED HORIZONTALLY. DISAPPEARS FROM THE BOXING OF THE LETTER UP AND DOWN, AND NOW NONE OF THE BUTTONS.

    menu-squashed.JPG

    Interestingly, when I go to the menu root (by clicking the Options button) and turn on the DVD player and turn on, the main menu is not affected, and all the buttons still work. The menu root is almost identical in design in the menu title, because it has exactly the same video in the background and audio playback on top. However, this problem occurs only in the menu title. Also, if I turn the DVD player working again while in the middle of watching one of the videos on the DVD, it still works very well. This problem occurs only in the menu title.

    The video in the menu title (and the menu root) is linked dynamically to Premiere CS4.

    Here is a picture of the organizational structure of the dvd:

    dvd-structure.jpg

    Parameters:

    PROJECT SETTINGS:

    Design mode: DVD

    TV standard: PAL

    Dimensions: 720 x 576

    Fields: Bottom field first

    Codec: MPEG-2

    Frame rate: 25

    Automatic transcoding: MAximum Audio/Video bitrate: 7,0 MB/s

    Audio transcoding scheme: Dolby Digital

    MENU SETTINGS:

    Base:

    End action: the title menu

    Replacement: Undefined

    Default button: 1

    Offset: 0

    Color scheme: automatic

    Automatically route buttons (checked)

    Operations: All authorized

    Aspect Ratio: 16:9

    Motion:

    Video: background (linked dynamically to Premiere CS4) video

    Audio: mp3 file

    Duration: 21:17 (seconds)

    Animated buttons (checked)

    Point of loop: 00:00:00:00

    # Loop: forever

    The DVD player is a Tevion AC-DVD51 (Jpeg/Mpeg4 Player)

    I have not included specifications on individual video files on the DVD, because they all work perfectly. It's just the menu title that plays up.

    If you want to get the list of additional parameters. Let me know.

    I really want to solve this problem, because I will be the sale of the DVD and I don't want this glitch happening on something, people have paid for.

    Thanks a lot for your time!

    -Robert

    Try your dvd on another dvd player.

  • Try to update iPad OS10 and froze on "check update" and now unable to turn off the iPad.

    Tried to update iPad OS10 and "check update" has been spinning for over an hour 1/2 and impossible to each slide to open or to turn off the iPad.

    Hello

    If you are sure its impasse press and hold the power button / stop and menu button

    Hold both down until you see the apple logo

    It may take 30 seconds.

    You have enough space on ipad for download, you need about 4 g?

    See you soon

    Brian

Maybe you are looking for