Turn off the power of the fingerprint sensor

Similar Questions

• My MacBook Pro with El Capitan 10.6.11 close the menu drop down. I have to turn off the power

  The closing down and options no longer work in El Capitan 10.6.11 restart on my MacBook Pro mid-2012. I have to press the power button to turn off.  When shutting down or restarting are selected, the Ribbon at the top of the screen disappears and Finder is no longer available but other aps on the bench of the accused are still available. When I restart after turning off the power, the system is back to normal until I need to close again.

  Hello

  Just in case, run disk utility.

  Open utility disk located in Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

  If disk utility indicates that the disc seems to be OK, you are finished. Otherwise, you must repair the disk.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• Satellite L20: Can I disconnect devices such as USB mouse without turning off the power?

  Hi all.
  I am owner of laptop Satellite L20. I always turned off power to my computer when I need to connect or disconnect a USB device. Some devices have a special icon on the toolbar disconnect them, but some don't (FDD USB or flash drives). Can I disconnect and connect devices such as mouse USB or Scanner wihtout turning off the power?

  Hello

  You can disconnect the external USB devices without turning off the unit, but you must use the option "remove hardware" before you cut the material.
  The icon "Remove hardware" usually appears with resources such as hard drives or USB key have the ability to buffer data. It of necessary for this buffer to the device before emptying it is disconnected

• Satellite A660 how can I turn off the light on the power button?

  Hello, I recently bought a new Toshiba A660-1FL.

  However mind, lighting of the multimedia keys, if I work in the dark.
  In the Bios, I could disable the led lighting, but the on/off switch is always lighting, which distracts me when I'm working.
  This laptop has two power LED, so the lighting power is in my view, unnecessary.

  My question is: How can I turn off the light on the power button?

  Hello

  The power button led cannot be disabled.
  It s there if the laptop is turned on.
  The lighting in the BIOS option only controls the multimedia keys...

  Welcome them

• E 7520 HP All - In - One Printer: turn off the power to the wireless printer

  I have not printed for a few days I have not noticed if my Wi - Fi connection worked.

  I tried to print wireless today and got the error message that the printer was not connected to the internet.  I tried to go wrong, but it did not help.  I checked the connection to the wireless router and put the password in.  It has not yet recognized it.  I tried to disable printing for my smart phone (I think it is called), but the screen froze on the circle showing the progress.

  I tried to turn off the printer with the power button, but that no longer works.

  The Wi - Fi light just keeps blinking.

  How can I disable the printer may reset?  Or can you help get my printer to recognize my wireless again?

  Thank you.

  Hi Rhonda, there.

  I would suggest to unplug the power cord from the printer without turning it off with the switch, it will do a reset without getting rid of all the parameters. You simply leave unplugged for about 1-2 minutes to clear out any power.

  I recommend then reconnect, and doing as much as you can from the guide below:

  Printer keeps no connection Wi - Fi

  Good luck and let me know how it goes

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can not sincronize my Blackberry Desktop Manager with Windows Live. I get the message "unknown error reported" How turn off the connected BlackBerry smartphone advanced power management features

  I'm on resolution 5, I used four different resolutions and none of them work, and I do not understand how to apply the meanless 5. Resolution 5

  Turn off the connected BlackBerry smartphone advanced power management features. For more information about how to disable the USB selective suspend feature in Windows, visitMicrosoft Help and Support site and search for "disable usb selective suspend."

  See if http://support.microsoft.com/kb/902274 help
  --
  ..
  --
  "andresgn" wrote in message news: 9754 c 356-97ed-4b9f-8dc5-c3318a6dc60b...
  > I'm on resolution 5, I used four different and no resolutions are
  > work them, and I do not understand how to apply the meanless 5.
  > Resolution 5
  > Turn off the connected BlackBerry advanced power management features
  > smartphone. For more information about how to disable the selective USB
  > suspend functionality in Windows, see the Microsoft Help and Support site
  > and look for "disable usb selective suspend."
  >
   
   

• S2415H, PSM, turn off the power indicator "pulsed"?

  Can I turn off the power in Active mode indicator, but it would also power off when it enters PSM (power saving mode). Very disturbing at night in the room. Any way to do it?

  That's how I've always used my monitors over the years. Mine have always done well after the warranty period of 3 years.

• LJ Pro300 color MFP M375nw. Power cycling, displays "49 service error - turn off the power, then press" on-screen.

  Bike constantly, the power display "49 service error - turn off the power, then press ' on-screen before stopping.
  For this printer only when it is connected to the network. Quite happy to sit quietly when printer NOT connected to the network.

  Unplug the network cable from the printer, check and clear all print queues (there may be a doc pdf sitting in a pc or server print queue)

  Once the queues have been dotted, restart the printer and reconnect the network cable.

  If this does not cure the problem, then the likely problem is a defective formatter Board.

  Good luck!

• Cannot use Wake on LAN, unless that "allow this computer to turn off the device to save power" is checked

  Wake on LAN - power management

  On my Media Center PC, I am unable to use Wake on LAN unless "allow this computer to turn off the device to save power" is checked (in the tab power management of the adapter in the Device Manager). "Allow this device to wake the computer" and 'Allow only a magic packet wake the computer' is checked, but become grayed out when "allow this computer to turn off the device...". ' is not checked.

  The problem is, Wake On Lan doesn't work unless the computer has been asleep for a short period of time. If I try to activate the computer using WOL after about 10 minutes, he never wake. I guess that's because "Allow this computer to turn off the device to save power" is checked, the machine is before turning off the network adapter.

  Is it possible to force the computer to disable the NETWORK card, but would retain the capability of WOL? Or ensure you THAT WOL works little regardless of how long the PC has been asleep?

  The machine is a Windows 7 PC with a Nvidia nforce network controller.

  By the way, I have a laptop on the same cable network that has all three items checked in the tab for its NIC device power management, and this machine can be awake at all times using WOL, regardless of how long he has been asleep, this issue must therefore be with the configuration of the Media Center computer.

  I would be really grateful for any suggestion, I spent a lot of time trying to get this to work!

  See you soon

  Hello

  If the systems are only a sleep you don't need a magic packet.

  If computers are set to wake on any network traffic all Ping or arp will wake them up.

  For this configuration, it is best to disable the saving of NIC.

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------------

  Real means WOL shut down a computer on Hibernate real position, http://www.ezlan.net/WOL.html

  However as these has involved the PSU cooperation. Motherboard. Network card and are not considered critical by the industry for the user end is a YMMV situation.

  12 Desktop who are under my immediate control (mix and match brands and processors). Only three are fully compliant and properly awake.

  Three satisfied partially, the rest don't care my desires/needs of Wake on LAN.

  On the positive side, since it is now fashionable to go green, the percentage of new computers that keep the better sleep habits significantly improved.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Cisco router WIFI does not work after turning off the power

  I have a CISCO router that worked very well until someone turned off the power for a few minutes.  I tried to unplug the modem, the router and the laptop and waited a bit.  Then I turned on the modem, then the router, then my laptop but it is still not in communication with the modem.  I can use the modem with a hard connection to the laptop but need the WiFi as well as others can use it.  Help, please.

  You need to contact support with your Cisco router.  It looks like it might have been reset and the installation needs again.

• Turn off the power limit Ad Tracking?

  Hello! I have a problem with the feature "search ad limit. The cursor is gray and will not let me turn off, saying that I have less than 18 years when I'm not. I've already changed to 'allow changes' restrictions and I don't know if I have apps which force advertising, tracking, and I don't know how to fix this, if this is the case. Help, please! I need this setting off to access certain applications of mine! I am also on a personal Apple ID.

  Turn off wifi and cellular data, then click on the button of advertising in privacy and turn off the announcement of limit button

• Turn off the mouse pointer shadow power in Server 2008?

  Server 2003 there was a registry called UserPreferencesMask value that could be used to turn off the shadow of the mouse pointer to the complete operating system, including the login screen. This registry value does not exist in Server 2008. Anyone know how to disable the whole OS mouse pointer shadow in Server 2008?

  Here's an expanded section of a screenshot showing no shadow on the mouse pointer after a reboot and have disconnected after putting the UserPreferencesMask key in the Windows registry in Windows Server 2008 under the 'HKEY_USERS_\. Default\Control Panel\Desktop' key and I have already mentioned this so if this isn't what you want, then I don't understand the question, sorry!

  

• Try to update iPad OS10 and froze on "check update" and now unable to turn off the iPad.

  Tried to update iPad OS10 and "check update" has been spinning for over an hour 1/2 and impossible to each slide to open or to turn off the iPad.

  Hello

  If you are sure its impasse press and hold the power button / stop and menu button

  Hold both down until you see the apple logo

  It may take 30 seconds.

  You have enough space on ipad for download, you need about 4 g?

  See you soon

  Brian

• P5P34EA: how to turn off the FN key?

  Hello

  How to turn off the fn key?

  Please READ: everyone saying fn = f10 or fn + f2

  but it's not doing nothing for me! and ctrl + esc just display

  me information of sistem!

  Help, please

  Thanks, March

  Hello

  Try the next method.

  Hold the left SHIFT key you click Shutdown to temporarily prevent hybrid boot.

  Let off the laptop computer for 10 seconds.

  Start by typing esc button permanently as soon as you press the power button (do not wait for the prompt) and see if it will access the start menu - if that is the case, select f10 to open the Bios Menu.

  Kind regards

  DP - K