Turn off the prompt of typekit?

Similar Questions

• turn off the prompt of telemetry

  Windows XP, Firefox 17.

  I can't turn off the prompt of telemetry. If I change '2' to '0' to the subject: config, it jumps right back to 2 and does not leave my changes or permanent. Clicking 'No' to the command prompt only works for the session. Help!

  You are welcome.

  There's only one file prefs.js with valid content.
  
  If other software (security) maintains a lock on files or protect it from the changes to the files then Firefox is not able to update content and you have problems.

• Turn off the prompt to initials in the office

  Hello, I was able to remove all the guests initial dialogue for office using the GPO for Microsoft office, but this does not have to invite the user to initial all the time a user logs on and starts the Office for the first time. What I did was create a script to start on the main image with the values below. I tested on the master, but it seems that when linked clones are created for the configuration of the computer startup scripts are not there, why is this? How can I turn off this prompt. Thank you, I have a vbs script which, as I mentioned works very well and I confirmed it modifies the registry key [HKEY_CURRENT_USER\Software\Microsoft\Office\Common] 'UserName' = "VDI LABORATORY USER' [HKEY_CURRENT_USER\Software\Microsoft\Office\Common\UserInfo] 'UserName' = 'User VDI' 'Business' = 'My College'"Citation"="VDI ".

  It worked for me with the link above http://support.citrix.com/article/CTX134352

• How can I turn off the prompt to start in safe mode?

  I noticed that, since the 18th of Firefox on Windows 8, I observed here safe mode window: https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode?esab=a & as = aaq #w_safe-mode-window_2 pop up when Firefox crashes asking me to run mode without failure.

  This window is helpful, but I want to turn it off. The circumstances in which I use Firefox it loads right in the window of the browser immediately (I am in the automated browser test.) The reason why my browser stopped is that I killed him with my script to send the command "taskkill /f /im firefox.exe" or "killall-9 firefox")

  Safe mode window still does not load for me. I only noticed on Windows 8, not on all other platforms, but force intervention from me to go forward, I want to avoid.

  Get help turning that off would be appreciated.

  Hello, you can try this - enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named toolkit.startup.max_resumed_crashes. Double-click it and change its value to something very high as 999999 (setting to 0 or - 1 will also work, but I've not tried it myself).

• How can I keep the updates turned on but turn off the prompt to update from DC?

  I like to keep auto-updates for Adobe Reader XI but I don't want the users to see a prompt to install Adobe Reader DC. Is it possible to do this? There is emerging an our Terminal servers, it is to appear on our desktop computers and he is popping up on our workers to remote computers. This is extremely irritating and causes headaches of support.

  I already have a custom MSI installation that I use. The options to achieve this?

  Thanks in advance!

  Chris

  Chris,

  Please try to set the iDisablePromptForUpgrade registry value 1 as below

  Value name - iDisablePromptForUpgrade
  -Type of DWORD value
  Path of registry - HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Adobe ARM\1.0\ARM

  The above registry path is for 64-bit systems

  Skip Wow6432Node on 32 bit

• Cannot turn off the prompt of password to wake up sleep monitor

  So whenever my screensaver lights up and I'll be back to wake up the monitor I get the password of the user account guest.  I am running Windows XP home on a dual boot Macbook Pro.  I have the owner administrator account and staff use account for the safety of navigation, which is attached to Power User.  Regardless of which account I'm in, if the monitor goes to sleep, wake up, I have to enter a password, which is terribly boring.  I have the option "Ask for password when the computer wakes from sleep mode" unchecked under the Advanced tab of the Power Options Control Panel in the control panel.  I have my power supply mode set to always on while that plugged.  I also have my user defined in fast user switching accounts.

  At this point, I wonder if the standard user account is an exaggeration.  Maybe I should do all my work on behalf of owner so that at home?

  If anyone can help, that would be nice.

  Thank you.

  Great, thank you!  Who did.  Although it took several attempts to analysis of reading this real Panel sees this checkbox.  For some reason any I just kept missing it.  But now all is good.  And I'm less annoyed.

  Thank you.

• Turn off the prompt text

  Hi all
  
  I have a form with a couple of database fields. I hide a field when it has a certain status. The problem is to hide the guest of this issue.
  
  If found then % c_pro
  
  set_item_property('FILES.) DEINUSE', property_true);
  set_item_property('FILES.) DEINUSE', enabled, property_true);
  set_item_property('FILES.) DEINUSE', update_allowed, property_true);
  set_item_property('FILES.) DEINUSE', displayed, property_true);
  on the other
  set_item_property('FILES.) DEINUSE', property_false);
  set_item_property('FILES.) DEINUSE', enabled, property_false);
  
  The field is disabled en is not visible, but the guest remains visible. I tried "PROMPT_DISPLAY_STYLE", but its does not work. The guest is a button above the field.
  
  Thnx.

  Hello

  Make sure that the legend is the guest of the item itself. If an item is hidden, then his guest is also hidden. The legend can be an independent text. And we cannot change the length of the TEXT element property.

  Kind regards

  Manu.

  If my answer or the answer to another person has been useful or appropriate, please mark accordingly

• P5P34EA: how to turn off the FN key?

  Hello

  How to turn off the fn key?

  Please READ: everyone saying fn = f10 or fn + f2

  but it's not doing nothing for me! and ctrl + esc just display

  me information of sistem!

  Help, please

  Thanks, March

  Hello

  Try the next method.

  Hold the left SHIFT key you click Shutdown to temporarily prevent hybrid boot.

  Let off the laptop computer for 10 seconds.

  Start by typing esc button permanently as soon as you press the power button (do not wait for the prompt) and see if it will access the start menu - if that is the case, select f10 to open the Bios Menu.

  Kind regards

  DP - K

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.

• Turn off the Infrared Port

  I use a remote to turn my tv-related. When I use it well, it changes the setting on my laptop. His frustration through Netflix and strip off what I'm doing because I'm using the remote control. How can I disable the infrared port on my laptop so I can use my remote without problems?

  Hi Sarahelizabeth,
   
  Disable infrared

  You must be logged on as administrator to perform these steps.

  If your infrared computer ability does not, infrared can be disabled in Windows. If your computer has infrared technology, here's how to turn off the infrared connection:

  1. open the Manager of devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. double-click on infrared devices.

  3. right click on the device, and then click disable.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Configuring updates stage 3 of 3 0 full do not turn off the computer

  Got the scren then restart the pc "Configuring updates stage 3 of 3 0 full do not turn off the computer" and does not get the login screen. Every time when restarting the pc get the same error. Also not able to login in SafeMode also.

  Please provide the support for the same thing.

  You probably eventually turn off manually.

  Read this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems to restart, read on:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And wonders about the updates of Windows:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, although wanting to tell them exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• LifeCam Permenently 5001HD turn off the autofocus

  Hi, I recently bought a webcam of 5001HD lifecam which I use an image, follow-up of project. I am aware that you can disable the "autofocus" function by using the application of the lifecam, but when the camera is disconnected or the power is off the autofocus light when the webcam is reconnected. I was wondering is it possible to disable continuous auto focus using regedit or can be uninstalled from a command prompt or a command shell. Any help would be appreciated.

  Concerning

  Alan

  Hello

  To turn off the autofocus, you should disable the function Trucolor. To do so follow the steps below.

  (a) open Microsoft LifeCam

  (b) click on the arrow to the right of the camera image to open the Microsoft Dashboard

  (c) click the settings button in the upper part

  (d) under Image adjustments UNCHECK trucolor

  (e) there will be a new button (properties), you can press as trucolor. Click on the properties button and a new window will open.

  (f) click the camera control and clear the check BOX update.

  (g) now you can focus the camera manually by moving the bar left and right

  Use this procedure to disable the auto focus and you will have an option for manual focus.

  You can also post your question on the link below more support fr.
  http://support.Microsoft.com/hardware#tab1

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to update iPad OS10 and froze on "check update" and now unable to turn off the iPad.

  Tried to update iPad OS10 and "check update" has been spinning for over an hour 1/2 and impossible to each slide to open or to turn off the iPad.

  Hello

  If you are sure its impasse press and hold the power button / stop and menu button

  Hold both down until you see the apple logo

  It may take 30 seconds.

  You have enough space on ipad for download, you need about 4 g?

  See you soon

  Brian

• Turn off the power limit Ad Tracking?

  Hello! I have a problem with the feature "search ad limit. The cursor is gray and will not let me turn off, saying that I have less than 18 years when I'm not. I've already changed to 'allow changes' restrictions and I don't know if I have apps which force advertising, tracking, and I don't know how to fix this, if this is the case. Help, please! I need this setting off to access certain applications of mine! I am also on a personal Apple ID.

  Turn off wifi and cellular data, then click on the button of advertising in privacy and turn off the announcement of limit button