Turn offf router at night

Similar Questions

• Printer e-all-in-one printer 7520 printer turns off during the night

  My printer was initially set up to automatically print multiple daily crossword.  It has worked well for more than a month.  Now the printer stops during the night, and I have to unplug the device and plug it in again so he can print the puzzles.

  Hello DonIriving,

  Welcome to the HP Support forums.  I understand that your Photosmart 7520 stops during the night.

  I've included the document the printer turns off unexpectedly after being inactive for a period of timetroubleshooting.  It will guide you in how to correct this problem.

• Planning of computer of Windows 7 to turn off completely every night then turn the next morning

  How to plan my computer Windows 7 completely extinguished each night, then turn on the next day morning

  It is easy to stop. You can do that with a scheduled command.

  Start-up is more difficult. Here are a few options:

  • Check if your BIOS supports supported a planned start.
  • Check if your BIOS will start automatically when power is applied.

• Satellite 1800-354 is unable to load the driver when it is turned off during the night

  Hi could sombodu help me to solve this problem.

  My laptop wives is unable to load the driver when its been delivered overnight. It's normal runs when the drivers installed and when it was turned off for about a half hour.
  The laptop has windows xp sp2, the card is a belkin f5d7010 802.11 g and I downloaded the latest drivers for it. Thank you louis.

  Hello

  This driver is the problem for the PCMCIA port or wireless network card?

  Good bye

• Automatically turn off notifications in night mode

  I just started using the SmartBand and I think it's great and especially function where you can take the SmartBand notify you of incoming e-mails etc but I have a problem/question.

  Is any way to have the SmartBand stop notify/buzzer indicating new emails etc when it is in night mode? Normally, I keep my phone in silent mode don't wake etc. received e-mails while you sleep at night, but I noticed that even if I have the laptop (a Sony Xperia Z2) silent vibrating SmartBand guard repeatedly wake up.

  Of course I could manually set SmartBand OFF notifications whenever I have go sleep and then re-enable notifications in the morning but would be nice if this can be automated, and to be honest I find it a bit weird why this isn't the default behavior because that love to be woken up in the middle of the night as soon as you receive an email etc...

  Many thanks in advance,

  Richard

  Thanks for your reply, but as I said in my first post I know that I can do it this way but I prefer having automated and fact is after doing a few tests now have the SmartBand in night mode, it is not vibrate even if I checked the notification option is great.

  Don't know why it did not work last night but the only thing I can think is that it was not in night mode, well I thought it was.

• It is "possible to achieve endurance mode is automatically turned on in the night?

  Hello

  I send that updates in periodontal 30 minutes during the day (9-22)

  E-mail using the wifi and mobile data.

  If I use stamina mode all the time and add the e-mail application to the "white list".

  can endurance mode still stop wifi and mobile data during night (22-9)

  Or mode endurance can be activated automatically in the night so I wouldn't have to add the e-mail message to the white list.

  Activation of the manual mode endurance is not enough for me because I always forget to activate it.

  If there are good 3rd party application to do this it is an option but I prefer to use application own phones.

  Yes, you're right. Because you have configured the e-mail application at a frequency of between 9-22, ENDURANCE mode will be fully active when there is any further action on the email app. After 22, the email application do not have access to other connection and STAMINA mode will then cut the connection to the network.

  Unfortunately, there is nothing that you can check, but it's how the STAMINA mode is designed to work. When there is no application or similar who tries to access a connection, and the phone is in "standby mode" for 15 minutes, ENDURANCE mode will cut the connection.

• UPS: turn off at Mac Pro every night

  I just bought a new power supply (UPS) uninterrupted and it comes with the option to transform the every night to save energy (after I stop the desk top Mac Pro).

  I searched the internet and Apple support communities and apparently there is no big advantage or disadvantage to stop the Mac Pro every night.  It does not harm the desk top, it allows to save some energy, and it makes it safe from hackers while I'm asleep.

  I can't find anything that tells me if there is a problem with completely set turned off power every night well.  Anyone know of any reason not to use "SHUT DOWN" and then turn off the UPS?  I guess the only difference it makes to the desk top Mac Pro is that it uses a battery to keep the current date and time.

  An overview of everything that will keep my Mac Pro (mid 2010) humming is greatly appreciated.

  It uses the battery to keep the current date and time.

  ... and to remember some system settings that must be available at the beginning of the start-up procedure, such as "where is the boot drive.

  If your Mac does not start, the battery is a Lithium long term non-powered cells of room behind the graphics card slot. It should measure about 3 Volts in your hand to be useful. BR2032 is what apple installed, CR2032 will work in a pinch. They are used in the door openers garage and car-door-keys.

• My computer turns on once a week automatically during the night. How can I stop this from happening? Thanks Gunter

  Hello
  I bought a used desktop computer. After setting it up again to what I had before I find the computer comes on every Saturday night at the same time. How can I stop this from happening?
  If anyone has an answer for me please give him in singles and not "computer language".
  Thank you
  Gunter

  Your best course of action would be to do a complete new installation of Windows.  Not sure how this computer has been maintained or used.  She could have anything whatsoever thereon against malware of illegal material.

  Although the automatic turn on every Saturday night is probably trivial (for example, some application checking to see if there are updates), it could be malware "phone home" with your personal information (bank accounts, passwords, etc.).

  This TechNet article provided by 'Support' engineer is not likely to be useful for you.  For Windows XP (you posted your question in a Windows XP forum), open scheduled as follows:

  Click Start > click on all programs > point to Accessories > tap System Tools > and then click scheduled tasks.

  Review each of the tasks listed to determine what they are doing.  You can then decide if you want to remove one of them.  You should consider, however, that there may be other mechanisms that cause your computer turn on as you describe.

• Windows stops my USB wireless adapter when it turns off and it does not recognize when it lights.

  I have new Dell with router Linkys, linkys Wireless USB adapter, - have had this same problem with other adapters, routers and windows XP.

  Wireless USB adapter works fine until the computer turns off during the night. When I turn on, cant' find internet b/c "no wireless adapter found" I disconnect, then reconnect the usb wireless adapter and it works very well.  I do this every time?  Is there a fix for this?

  Hello

  When you say "turned" off tell you off, or let go the day before?

  http://support.Microsoft.com/kb/928631/en-us

  Jack, MVP-Networking. EZLAN.NET

• Turn on wireless capability

  I have a Dell Inspiron 1525.  Last night I was able to connect to the internet through the wireless network.  This afternoon, I tried to connect all the wireless networks have disappeared and it is said that the wireless feature is disabled and I need to turn it on.  I looked on the search sites that told me to press Fn + F2.  I did and nothing happened.  I have diagnosed and repaired and again, get the 'turn on the wireless feature' issues.  I turned the router on and apart, and computer of my roommate (which I am on now) connects very well.

  Help, please!

  Look at the previous discussion in http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/c74a1cb6-dd15-4920-a238-b832155a202d 

  I hope this helps.

  Cheers.

• Equium A300D - 16 c turns on but the screen does not show anything / remains black

  Hi, I have a laptop Toshiba Equium A300D - 16 c.

  It was fine until now...

  When I press the power button, my laptop turns on but the screen remains black / off.
  The indicator disk HARD is not Flash or anything... (in case that helps)
  I also tried to remove the battery, hold the power button for 30 seconds and then reconnect the power cord... Same laptop turns on but the screen is black.

  I tried to connect my laptop to my PC using a HDMI cable screen, but without success... Laptop turned on but monitor my pc showed nothing.

  I have not changed anything inside my computer laptop or unscrewed it.

  PS:
  Quite often, I kept my laptop on the bed/pillow it may have something to do with overheating or something.

  How did I get to this point:

  Yesterday, my laptop was fine, there was nothing wrong with her... I turned off during the night, but when I tried to turn it on this morning it is where I have faced this problem.

  Any help would be appreciated.

  Thank you very much
  Rejanu.

  Long ago, I had similar problem on my old Satellite. CPU was faulty. After replacing the CPU, everything was OK again.
  I put t really know what to say.
  Maybe you should contact Toshiba and let check your laptop. They have diagnostic tools and may know what is the problem.

  What do you think?

• Overnight battery discharged when the satellite has been turned off

  Hello

  This has happened again. My battery empties 25% from one day to the next and will be completely discharged in a week. The machine is not in hibernation, it is completely shut down. If I charge the battery and remove it from the machine it does not lose cool, which indicates a draining of the laptop. Any ideas?

  Hello

  Maybe this will help you a bit:

  I found this useful Toshiba paper on this topic:

  Battery drains 15-20% when it is turned off during the night
  http://support.toshiba-tro.de/KB0/TSB6B01N50013R01.htm

  This can happen if the wake on the service LAN (WOL) by the built-in LAN module is turned on

  Please check!

  -----------------------
  By the way; the loss of 2 to 4% of the power of the battery during the night is a normal state.

  For details see this
  http://support.toshiba-tro.de/KB0/FAQ6301EP000ER01.htm

• HP Pavilion G6: Black screen, Cap lock blinks and turned on wifi in orange

  Bought this non-functional computer for $40.  The screen is black, the caps lock flashes and the wifi light is lit in orange.  At the time, we could hear all the computer starts, the fan would go, the drive initialize... so I watched a few videos on the problems of black screen on youtube, he got up and running.

  However, it is a tease, she worked for less than a month.  I does not solve the problem which has been heat.  I buy quadfans for going below but they turned off during the night and should not have.  I have the computer to check the updates at 03:00, so the computer would then come and fans wouldn't.

  Well, the black screen problem is backkkk.  The fan don't dΘmarre, try the hard drive.  This time nothing is set.  Ive pulled the motherboard to replace the fan.  I replaced and updated the hard drive and memory... still nothing.   It also has a new battery and power cord.  Any suggestions as to what may be the problem?

  Hello @Kureeeus1,

  Thanks for the quick response!

  Try to review the following document and let me know how it goes:

  Computers laptops HP - computer will not start and emits a LED or a beep Code

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Cannot access the Router #2

  Here is a diagram of my home network.  This is what works.  If I have a device (phone or laptop) connected to the #2 router (wired or wireless), I can browse my network devices and browse the Internet without any problems.  My problem happens the other way.  For example, if I have a device (phone or laptop) connected to the #1 router (wired or wireless) I can see all network devices, with the exception of #2 router and all devices connected to it.

  Starting from a device connected to the Router 1 # I can ping LAN ports and Internet #1, #1 wireless bridge and Bridge #2 wireless router.  However, I can not ping the Internet port on the Router #2.  I guess it's a setting on Router #2 just don't have yet.   Here is a list of my equipment:

  Wireless routers are the two Linksys WRT 54 G

  Wireless bridges are the two Engenius ENS202

  Any ideas on why this is happening?

  

  Turn your router n ° 2 in a switch\repeater.

  Changes required for the installation of WRT610n:

  1. Change the SSID of the evocative wireless for the location. Ex: UpstairsWifi
  2. This must be done at the same time on the configuration screen, change the IP address of the router to 192.168.1.254 for you there is an IP address conflict with your main router, disable DHCP and save the settings
  3. Don't forget after that point that the internet port of the router is not to be used only the LAN ports
  4. If you need to reconfigure this router you would use it's new IP address in the browser "192.168.1.254".

  This means that your network IP addresses range starts with ' 192.168.1.. " If not the typical another range of IP addresses would begin by "192.168.0. * ' in which case the router's IP address must be changed to 192.168.0.254

• Disorder of the WRT54G Wireless - G Router!

  I had problems with my internet connections for the last days. Initially, I called my ISP because I suddenly lost all connectivity. They told me to unplug the router and just connect my access directly from the modem cable to the Tower, since, on their side, they saw that I was connected to the internet and also had a router. They told me to leave the router disconnected for a few hours for the cache to eliminate because it did take in the change IP. So I did, and a few hours later, I've hung up and was back on the web. But I noticed a problem. There are a few sites that I have been unable to access. The taskbar would be simply read 'wait... '. "and then I get the problem loading Page telling me that the connection was reset, or that I had a firewall problem. I checked my firewall and security programs to ensure that my settings were allowing connections to these sites. Indeed, they are. I googled my problem "cannot access some Web sites" to see what I could do with little success. I remembered what the tech said on the router and took a suggestion from one of the tech sites to check another browser to see if it works there. Indeed, I met the same problem there. I plugged my connection from modem to the Tower again and I was able to access these sites once more. So I thought that it is a problem with my router. On top of that, wireless connections can be made. They're going through. I tried to restart the router again and used the disc that came with it to implement thinking it would help me. In addition, I accessed the site router to change the settings. Nothing has helped or worked. Hiding what ever is there is always here, or any problem with do not accept IP addresses is always present. I rebooted my system and I tried to access the router site again, only to be blocked as some other sites. I'm really worried here. I tried the command prompt and: ipconfig / flushdns version don't renew method still no good. Just what is wrong with my router? How can I get this resolved. Why are these inaccessible sites now and how to get what is mucking up the DNS recognition to clear and it can work properly again? I got it on DHCP so it can automatically recognize changes. My IP is not static. I'm really worried here. Help, please!

  I have it!

  Ok. I did two things:

  1. I changed my port (just in case).

  2. I did a hard reset on my router (did not notice the button next to the original cable entry).

  I put off the power to the modem, router and my PC. Then I turned on my modem, enabled on the router port, turned the router back, did a hard reset and he waited a bit. Then I turned on my PC.

  After that I did my own usual drive, consulted the web and done a clean cache of the browser (just in case). My little brother to come and do a test to see if it connects wireless to...

  ALTO! It's trendy!

  I tried the sites that I have problems with and SUCCESS! They connected!

  IT WORKS NOW! I am so happy!

  Thank you all for your help! It is appreciated!