Similar Questions

• It is best to turn off or leave my iPad in standby mode

  It is better to turn off or leave my iPad in standby mode?

  I let my off overnight, but connected to a power source to keep the battery charged.

  Alternatively, you can stay in mode 'sleep' but just keep an eye on the battery.

  If you don't see the percentage of battery on the screen, tap settings > battery then switch battery percentage ON.

• Not able to run standalone LabVIEW RT application cRIO (works well in development mode)

  Strange question.

  I'm trying to deploy an application of RT to a controller for cRIO-9074.  I developed the application in development mode and everything works and seems to be being debugged.  However, when I try to build and to deploy the application as the startup, the application seems to start running, then stop cold (based on the CPU usage as described in the Distribution System Manager OR).  At this point, I can't debug because the application is stopped (no updated variable).

  The problem seems to be related to the NI_AALPro.lvlib library, because if I turn off the function polynomial evaluation, the code will compile and start fine.  I'm tempted to recreate the necessary functions and create my own library, but I prefer to find the problem and fix it rather than re-create the wheel...

  Is it possible that the library badly uploaded to the controller?  If so, is it possible to force the appropriate library to be transferred to the controller?

  Thanks for any help.

  Toader,

  Thanks for the reply.

  I think I solved the problem.  For some strange reason, the functions inside the NI_AALPro.lvlib were not available on the cRIO at run time when the application tried to run in stand-alone mode.  I ended up adding the library to the section to always include the source files tab in build specification and the program runs now.  I'm not sure what it is, but it works.

  Thank you Morgan of NOR.

  Kind regards

  Big Ev

• I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do?

  Hi guys, I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do? Thank you

  This Eizo has a normal resolution of 1920 x 1200 pixels. I expect not to see a lot of benefits of using the GPU. You really see the advantage to screens that are at least 4K (3840 x 2160 pixels) or more. On small screens, you can see some benefits with smoother updates if you ONLY use the base sliders to develop. If you use brushes, turning on the GPU can actually slow you down a bit. In most cases, loading images in develop is also slower when you activated! There are a few illustrative notes to an engineer from Adobe that you can read here: notes for Lightroom CC GPU (2015) in order to better understand what is happening. Currently, in most cases, I recommend leaving off the coast. I think that Adobe is trying to improve and have more cards supported, but it is not yet completely there.

• Chromebox: developer mode chromebox

  I recently bought a HP chromebox to use a kiosk application. However, to completely install the kiosk application in the way I need to, I need to switch to developer mode.  In accordance with the instructions that I have to

  To call the developer/restore mode, you insert a paperclip and press the RESET BUTTON (just beside the kensington lock) and press the power button. Release the RESET BUTTON after a second.

  Mode Dev first call you the recovery and to the recovery screen, press Ctrl-D (there is no prompt - must be made). It will ask you to confirm by pressing the reset BUTTON again.

  Dev-mode works as always: it will show the scary start screen and press Ctrl-D or wait 30 seconds for initialization.

  However, when I do this the box does not send any video signal to my HDMI screen so I am completely in the dark as to what is happening, if anything. I tried with a wired USB keyboard and a USB wireless keyboard, same result: nothing seems to happen.

  Who has an idea to switch to developer mode on thisHP chromebox? (Not a chromebook)

  Hi @StephanvR,

  Steps performed by you to switch to Dev Mode seems to be OK.

  As you mentioned that you have connected the display via HDMI and there is no display.

  Therefore, you can try to connect to display Port (DP) and check if there are any screen.

  I hope that answers your question.

  I am an employee of HP, the views expressed here are my personal opinions, not HP.

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

  Click the "Thumbs up" button to the left side of my post to recognize the message *.

• When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  The standard specifies:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• my laptop is insafe mode and now my screen is huge and I have no sound while it is in this mode... How do you turn off safe mode

  original title: safe mode

  my laptop is insafe mode and now my screen is huge, and I have no sound while it is in this mode... How do you turn off safe mode?

  Hello

  audio drivers are not loaded in Mode safe

  read this to get out of Safe Mode:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

• Handly you turn off compatibility mode in Windows 7 Home Premium

  I loaded iTunes 9.1 program has 64 bit for Windows 7. When I open it, I get a message that the program has been set to run in compatibility mode. He then States for best results, turn off the compatibility mode for itunes before you open it. How can I turn off compatibility mode?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Missing development mode

  I have 2 OS. Development mode is missing from my settings option. So I can't connect to Eclips. How to get the development option in the settings. Help, please.

  It should be under settings > Security.

• How can I turn off Compatibility Mode for a program that does not require it?

  I loaded iTunes 9.1 program has 64 bit for Windows 7. When I open it, I get a message that the program has been set to run in compatibility mode. He then States for best results, turn off the compatibility mode for itunes before you open it. How can I turn off compatibility mode?

  Hello Wynn 1,.

  Article Apple: http://support.apple.com/kb/TS1489

  Try the following steps to turn off Windows compatibility mode:

  1. Quit iTunes.
  2. Windows XP and Windows 2000: on the Start menu, click my computer (or double-click my computer on the desktop).
     Windows Vista and Windows 7: on the Start menu, click computer.
  3. In my computer, open the drive C:\ (or according to your drive Windows is installed on).
  4. Open the Program Files or "Program Files (x 86)" folder if you use a 64 bit version of Windows Vista or Windows 7).
  5. Open the iTunes folder.
  6. Right click on the app to iTunes (iTunes or iTunes.exe) and in the context menu, clickProperties.
  7. Click on the Compatibility tab.
  8. If it is checked, uncheck the box under compatibility mode.
  9. Click OK.
  10. Open iTunes and play a song.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• development mode

  When setting in development mode Simulator a screen showing an IP address where the two first two tokens are attached to the 169.254 and there are som of choice for the next two chips. This IP address does not appear to be a report any with the IP address of the device. His IP address is 192.168.56.129. And nothing to do with my IP of the computer that is 192.168.10.54

  What it is? This who should I put it?

  The 169.254 is for the USB interface, but you can set one or the other as the debug ip in the properties of the device. I have the two together in mine and just add a suffix USB and WiFi in the name so I know which interface to connect to. Its useful for when you don't have a wifi network to connect to.

• Z10 blackBerry development mode

  Hello!

  When I go into Settings/Security/Development mode, I can:

  • activate this,
  • specify an IP address for the development,
  • install a token "debug".

  (if I translate well to the french).

  Could someone tell me more about these options?

  Is there a security problem if I try and install the debugging token?

  The token lets connect you the phone via ssh (among a few other things.)  You don't always have root access on the same phone with installed.

  With mode on you can sideload apps debugging, but they must always be signed (by someone with a BlackBerry Developer certificate, which could be you.)  Without development mode on the phone will not allow direct loading of applications via the interface USB at all.

  For purposes of sldeloading, there is no need to install the debugging token.

• BlackBerry 10 password remove for development mode

  Is it possible to be in development mode and have not created a password? Z10 is my primary phone, and it annoys me that I have the password on every time I'm in development mode. I'll be in dev without password mode? It would be a little easier my life

  Hello BojanKogoj,

  Thank you for your question. There is unfortunately no way to support to have your device in development mode without having a defined password.

  Let us know if you have any other questions.

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• Twisted colors in Lightroom development mode

  When I want to develop my photos in Lightroom develop mode of that all the colors in the image are bent upward. See the screen capture below:

  

  I struggled a while to figure what's wrong without success.

  Those who know how to solve this problem?

  Is this LR 6 / CC 2015?

  Disable the GPU acceleration: Adobe Lightroom GPU troubleshooting and FAQ