Turn on the video output TV 183 M70?

Similar Questions

• Some of my F keys on my laptop no longer work. Fixing of the F keys would be great, but at least it is another way to switch the video output?

  Original title: screen toggle main F

  Some of my F keys on my laptop no longer work. Therefore, I can't turn my screen to another monitor (IE. TV.)  Fixing of the F keys would be great, but at least it is another way to switch the video output?

  Hello

  Have you made changes on the computer before this problem?

  Step 1: Check if you are able to use on-screen keyboard function keys and send back the same.

  Step 2: The following article can help you in the selection of the display.

  How to configure and use multiple monitors in Windows XP
  http://support.Microsoft.com/kb/307873

• I need assistance with turning off tension or turning off the video card integrated on my inspiron 530!

  I need help to turn off the power or turn off the video card integrated on my inspiron 530, I had the drivers of the 8600gt installed and ready, but whenever I put the DVI in I get a black pic, so I did research online and I found the way, and that is to disable the video card intel which is located on the motherboard then how?

  I learned that I have to press F2 on the screen of the BIOS and go somewhere.

  so please help me!

  Thanks in advance

  Here's my card, if you need em

  Amount Total of Dell Inc. manufacturer of model system Inspiron 530 system memory 2,00 GB RAM System 32-bit operating system to type number of processor cores 2 64-bit capable Yes storage Total size 298 GB hard drives (C :) disk partition 162 GB free (288 Total GB) disk partition (d :)) 6 GB free (Total of 10 GB) Media Player (e :)) disc of CD/DVD media (g) adapter DVDCD/disc display of graphs of type Intel (r) G33/G31 Express Chipset Family graphics Total available 286 MB dedicated graphics memory 0 MB system memory dedicated memory 128 MB shared system memory 158 MB display adapter driver version 7.14.10.1437 monitor main resolution 1440 x 900 version DirectX DirectX 9.0 or better)) network card Intel (r) 82562V-2 10/100 Network Connection Network Microsoft Tun Miniport Adapter

  
  

• Qosmio F50 - how to adjust the video output?

  I have a F50 - 12W.

  On the side, there are 2 mini-jack ports. One is for headphones and a microphone. But the helmet also has a small logo of a symbol of a/v output.
  In the box when I got the laptop, came a plug to phono cable and video. I assume it's for video output. But can find no mention in the manual, or by a google search.
  How ever many I have set the output settings screen, I can't work.

  Can anyone help to shed light on this topic, thanks.

  Altron.

  Hello

  How do you connect the Qosmio F50 to your external monitor? I have too many Qosmio F50 and I use the HDMI port to connect it to my external monitor or TV.

  And what exactly do you mean you can't get it to work. You can see a picture on this subject?
  Also, here's an interesting document from Toshiba on this subject: http://aps2.toshiba-tro.de/kb0/FAQ7C021A0000R01.htm

• How to read audio data, but turn off the video in a clip?

  Hi just wanted to know how to disable the video, but still allow the audio to play through during the composition in sequels?

  Let me know, thanks!

  Tap the eyeball off the coast. Do not hit the "speaker" icon.

• How to turn off the video memory shared on the Qosmio X 870?

  Hello

  I find that when I use certain software (mainly CAD) then my video ram remains intact. I can't disable the shared - system memory that belongs to Nvidia Turbocache according to me.

  Some websites and forums say you can disable in the BIOS is the manufacturer has released a BIOS driver allowing it - appears not to be the case at Toshiba.

  Is there another way I would be able to disable this parameter. This Toshiba Qosmio x 870 was purchased because we needed a laptop computer with a high-end graphics card (class 1). Unfortunately, it seems to be under execution.

  I tried to put all settings in the Nvidia Control Panel Max Performace but I still don't get the (Micromine) software runs correctly.

  I would appreciated any suggestions or support of this form.

  Kind regards
  Jürgen

  As far as I know shared memory works automatically and laptop user cannot control it.
  There is nothing new and the same principle is on all Toshiba laptops.

  Sorry, but I'm afraid there is nothing to do about it.

• flashes and turns off the video when you play, has sound

  Where to play games online TI juice flashes. I have sound but no video. This also happens when I watch QVC on my computer.

  Hi yesndeed70,

  ·         What version of the operating system is installed on the computer?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         You get the error message?

  Follow these methods.

  Method 1: If you are using Internet Explorer, follow the steps in the article.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  Method 2: To update the drivers to display/graphics.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For reference:

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

• How the video output file mp2 to burn DVDs and watch TV?

  I created a video instruction to help after effects 2014 and produce the file to MP2 format. (I can open it and view it on my pc very well.) When I burn a DVD with Nero, it says it burns successfully and checks the disk, but when I try to play in my Sony DVD player, I get a pop up window that says: NO IMAGE, NO AUDIO

  I spent hours on the internet trying to find out what I am doing wrong. Could not find anything to answer my question.

  Does anyone have an idea? Need help as soon as POSSIBLE.

  Thank you

  Robb

  DVD is all 720 x 480 (NTSC). That's the reality of what is the resolution in pixels. If you want more, you go Blu - ray. (Or use another reading, usually without the menus, such a H.264 on a usb key).

• Sound works in preview, but not when I made the video output! :( [ADOBE AFTER EFFECTS CC 2015]

  Hey!

  I'm pretty new to Adobe after effects CC 2015. I have a video that is about a minute, everything works as it should when I preview the it. But when I visited, with the right settings, the sound will not be rendered.

  So basically I can hear all the sONFERENCES when I saw it, but when I make it I cannot here any sound at all. I tried to get the sound on Auto and on. But nothing works.

  

  And Yes, some of the mp4 files I use for audio as well, but will not play the file audio mp3 or another. Some would like to help! I've had this problem for a few days now!

  We have a solution for this in the update after effects CC 2015 (13.6):

  http://Adobe.LY/1MVxHgX

  Try it and let us know how it works for you.

• All-in-One PC 20-E014: my 20-E014 screen All - In - One PC has failed. Can I run the video output via a USB to a smart TV USB connection?

  Can I use a smart TV for a monitor by coming through a USB?  I have to set up an external monitor via the PC (which has a broken screen)?

  felix442

  Hello;

  Let me welcome you on the HP forums!

  Others may be different, but my guess is no.

  I use an external monitor connected via USB - but I had to install drivers so Windows to see and to do that, I had to have a working screen.

  Screen, I don't know of any way that you can install the necessary drivers.

  Also, don't really allows an external display as a replacement for the screen of the laptop because it does not start work until Windows is already loaded, and it is after that you have to connect.

• Fine black and white lines on the video output

  I loaded a project packed to make changes.  (The project was packed with a computer other than my current. Everything seems clean in the Prime Minister.  I came out of the standard parameters of Vimeo.  One of the clips of GoPro exports come as white lines that cover the screen.  Cuts before and after are the same camera, but dot display such problems.  The project initially issued very well.  I initially used neoscene to decompress images.  I even ran the film original neoscene once again, but no change.   Suggestions?

  Windows 7 - Cineform Neoscene codec - GoPro footage - Premiere CS4

  Thanks Jim.  I solved the problem.  I don't know what the cause was, but when I re-unzipped the file using free software GoPros, the files will appear clean again.

• Video output distorted on Qosmio F10

  Hello

  Until recently, my video output on my Qosmio F10 function works beautifully. When I connect my laptop to the TV the other day, using an s-video cable, the image had turned very distorted. The TV picture flickers and sometimes disappears completely.

  My laptop has the graphics card Nvidia GeForce FX Go5700 and I changed no settings what so ever of the point in time when the video output was working properly.

  To debug, I bought a new s-video cable and an adapter SCART. The use of these I've eliminated that the s-video TV in the port is the problem. It seems to me that if something is wrong with the signal from the graphics card.

  I would be very grateful for a diagnosis on this issue.

  Thank you and best regards,

  Johan

  If you are quite sure that the cable is ok, so it could also be a problem with the connection. Maybe lose plug or something like that.
  However, as a first step, you may try to update the page Toshiba graphics card driver.

  It would be very interesting to know if such question will appear on the new OS recovered

• Addition of dc7800 SFF video card: no video output

  I bought an EVGA GeForce 210 graphics card to an HP dc7800p SFF.  PCIe low profile fits into the designated location and the fan works, so I don't know that it is powered.

  When I install the card and the start-up of the machine, I get no video output at all.  There is no output over the connection video integrated dc7800.  It is perhaps as expected, because the technical documentation indicates that installing a PCIe x 16 graphics subsystem integrated card Devils.  However, there is no video output from the GeForce card either (from the VGA or digital outputs).

  The machine appears at Startup OK, because I can hear the prompt for the power on password.  If I enter that password, I get audio confirmation that it has been entered correctly entered and remove the disk activity whereas Win7 initializes, I can't see because there is no video output.

  I have updated the BIOS until the last level available about a week before, so I don't think it's a factor.

  I've read other suggestions, which some suggest to disable the video through the BIOS Setup.  I hesitate to try this, because if I turn off the video installation, integrated GeForce card and it doesn't work, then I have a machine with no video and no way to reactivate the integrated graphical subsystem.

  Suggestions please.

  Hello:

  The Board may be faulty.

  Even if the P/S of your model is only 240W, this card should work with a 240W P/S.

  I also agree with you that it would be imprudent to trifle with the BIOS settings. That will lead you nowhere anyway.

  The video card automatically disables the car video, and if you were to somehow anticipate that, Yes, you must reset the CMOS in order to retrieve your video. Not at all difficult to do, but why waste your time?

  Now... Did you first uninstall the video drivers before installing new video card?

  If this is not the case, there is an outside chance that is the question.  If you do not, remove video card, start the PC and uninstall the drivers for the on-board video.

  Reseat the video card.

  You can also clear the CMOS and play the long shot.

  See the guide below for how to do this.  It'll take you a few minutes. (Annex B, page 60).

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01162207/c01162207.PDF

  In this way, you have done everything you can and then came to the conclusion that the card is bad or not compatible.

  Return the card and get this one. $21.99 after discount. Comes with metal DVD/HDMI low profile.

  The Radeon HD 6450 is an option card offered in the HP Elite 8200 Mini PC, which is more recent than the dc7800 a few generations, but it has the same P/S 240W.

  http://www.Newegg.com/product/product.aspx?item=N82E16814125404

  BTW, when you install a video card to work with HDMI, your integrated audio system is also disabled.

  So after installing the video drivers for the card, restart the PC, go into the BIOS, go to the menu of the device on board and change the audio settings shipped from disabled to enabled. Press the F10 key to save the setting and again when you go out.

  Paul

• Instructions for video output on windows vista.

  Hi, I have connected my old laptop to a VGA HDMI converter box but I need instructions how to complete the process in the control panel to use windows vista.

  I know that the equipment works like the windows start loading page transfers to my LG LCD when I turn on the laptop.

  Just before the homepage appears he knocks off and the signal on the receiver goes out.

  I know that I have to set something in the control panel to set the video output to the LCD screen but do not know how to go on this subject.

  This gives a test
  Right-click on an empty part of your desktop > customize > on the left hand side select "connect to a projector or other external display.

  I hope this helps.

• Video output Vista professional S has stopped working

  I use a s video cable to the back of my PC to my home theater receiver. The video output was previously, but stopped. I always receive sound but it is via a separate coaxial digital cable. I tried other sources in the entrance of the receiver box and winning photo through them isn't a problem with the receiver box. Any suggestions on what may have caused this?

  Hi gc1971,

  Thank you for writing to Microsoft answers Community Forums.

  1. first of all, check that the s-video cable is correctly.

  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  3. make sure the TV is set to the s-video input.

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  You can also click on the link for more information about connecting TV to your computer

  Connect your computer to a TV

  http://windowshelp.Microsoft.com/Windows/en-us/help/2a2cde13-B60C-4F2F-b9da-4a433cc51ca91033.mspx

  Note: Make sure that your display card drivers are updated to the latest version available.

  Given that this issue has started recently, you can also try to do a system restore to a point at the TV-out worked very well.

  To restore the operating system to an earlier point in time, follow these steps:

  Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  In the System Restore dialog box, click on choose a different restore point and then click Next.

  In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  Click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Click on the link below for more information on restoring the system

  System Restore: frequently asked questions

  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx

  I hope this helps.

  Let us know if you need more assistance.

  Kind regards.

  Nicolas Mathieu

  Visit our Microsoft answers feedback Forum and let us know what you think.