Turn the power off when you insert the new hard drive (additional)
I have a server poweredge R710 Dell with a PERC 6i controller. Currently, there are 3 installed disks than RAID 5 and are 0-2, all of the listed physical disks are online with no hot spare.
My question is: I don't have 3 disks to install on the server exactly the same readers who are in the current configuration. Do I have to turn off the server to install these drives? (I'll use OMSA to develop the existing single VD configured. I saw a post that says not to shut down the server, so I am just wanting to make sure that everything I do is go on the server, install the new disks in slots open while its engine to the top and then make my other functions in OMSA to extend the RAID.
Thank you.
You never turned off to introduce new disks, except IF you are migrating a VD together for another computer or controller.
Tags: Dell Servers
Similar Questions
-
How do you download music on your RCA easy rip when you get a new hard drive?
How do you download music on your RCA easy rip when you get a new hard drive? When I plug my mp3 player it is not do anything but wonder about stuff that's already on mymp3. I want to download music does not stuff that is already perfect?
Hello
1. How do you try to download music?
2. that you get an error message when downloading music on the MP3 player?
Click on the following link to synchronize the media player with your MP3 player.
Set up a device to sync in Windows Media Player
Hope that helps.
-
Can't see vmdk file when you add a new hard drive to an existing vm
I'm trying to attach a vmdk file that was recovered from a backup as a new hard drive to an existing test VM (version of the vsphere 4.0 client). I was able to successfully download the file in the data store but it is not available to select when I try to add a hard drive, on an existing virtual machine. The vmdk file has been recovered from a backup server no idea why I can't see it would be very appreciated
Something does not fit here.
Since the file names "...-0000003..." this seems to be a delta (snapshot) rather than a virtual disk of dish (base)! Thanks for posting (tie) the hard header file to see how it looks like and to know what lack us.
André
-
F6D33PA #AKL: my laptop is running slow when you change a new HARD drive
My old HDD is dead, so I buy a new one and I change it. The problem is when I change to a new one and install Windows 8 64 Bit, when I finished installing it seems to be very slow and late, so I can't install any program because it is very slow. My Notebooke: HP Pavilion 14-n202tx Notebook PC CPU: intel core i5 RAM: 4 GB HARD drive: 1 TB
-
It wont let me load Vista on the new hard drive
Hard drive test:
Test your player - create a Bootable CD:
Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRDFor Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticJ W Stuart: http://www.pagestart.com
-
I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive. No idea what I'm doing! Thank you!
http://trials2.adobe.com/AdobeProducts/Acro/11/Win32/AcrobatStd_11_Web_WWMUI.exe
This is the file I download - but when I go to the Setup process, I bought for the installation program Adobe Acrocat Pro XI (11.0.07). When I insert my serial number, he wanders as invalid. I am running Win 7 Pro. It worked fine on my old hard drive. I think I maybe win64. Does it matter?
-
I'm having trouble installing Photoshop GS6 after installing the new hard drive. What do you suggest me? Tony.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
I'm reinstalling 11 items on the new hard drive on my machine. I got reg no product of the registry on the old drive but when try to install it says it's the wrong serial number. What I am doing wrong?
Hi Phill,
Please see the links below.
Hope this will help you.
Kind regards
Hervé Khare
-
Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number. How can I activate it?
Hi Uri,
Please click on the link below and contact the Adobe Support via chat.
Hope this will help you.
Kind regards
Hervé Khare
-
Followed by my previous inquiry, my hard drive crashed and lost my copy of Acrobat 9 in the installation of the new hard drive. How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton
Just reinstall from the disc (or download it from https://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html) and activate it with your serial number.
If your number of activations exceeds max (2), then you will need to contact customer service.
-
Pavilion series P6000: Configure the new HARD drive.
I install a new Seagate 1 TB HARD drive in a Pavilion P6620F. What I need to clone new HARD drive or just run the recovery discs?
It all depends of what your intentions are.
You are replacing the original disk or adding storage space?
The simplest method would be to clone the current to the new hard drive, when you replace the original hard drive. Install the drive cloned in the same place where the Moose an and with the same connectors. Start the PC and everything should be STATED as it was before, except that it will be on a new hard drive.
If you add a drive for extra storage of storage, it is simply a matter of conecting a sata conector between unused hard drive and a sata header and connect a power connector from the hard drive.
Once it is done, turn on the PC and log in to Windows.
Use Windows Explorer to create up to four partitions and then format the partitions. I am unware of how space exists in the case ATX mid for additional disks.
-
SMU 8108 does not start with the new hard drive
Hello
I am currently using SMU 8108 with SMU-1062 q.
The previous record was borken, so I had to install a new hard drive.
The new hard drive is fommatted as NTFS format, and it is currently mounted on 8108.
Unfortunately, I don't have recovery disk available to the general public so I am trying to install Windows 7 on a blank hard drive.
When you start, the LED OK PWK light is all the time, orange DRIVE LED turns on for a few seconds only when I turn on the switch.
LabVIEW RT switches are all off, I cleared CMOS several times to the Board of Directors, but the screen does not show anything.
I tried to use my DVI monitor with any other device as well, and it worked, so there is no problem with the monitor.
In addition, I tried to go in window safe mode by pressing F8 or Del it didn't work, so I can't see anything on the screen when his kick upward.
I tried to put a lot of information I can it will be very appreciated if you can help me with this problem please.
You said that you can't in Windows safe mode, you have installed Windows on the hard drive? Are you able to get into the BIOS of the controller?
If you are not able to access the BIOS for the controller, it may be due to bad RAM. If you are uncomfortable installing RAM and you have a few extra laptop RAM of the same type (I think it's the DDR3 for your controller) laying around, you can try to replace the RAM.
Was your hard drive damaged through certain events, or it just stop working?
-
* Original title: windows 7 download
I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?
It has probably comes with Windows 7 Professional 64 bit.
You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):
How to: What are my options for Windows 7 reinstall media?
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
You can also use Windows 10 too as you have the right to it as a free upgrade:
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Hi, I hope I'm in the right forum! I have a laptop Aspire with Photoshop CS5 extended. The computer's hard drive crashed and so I had to get another hard drive! Obviously as the hard drive crashed, I was unable to disable CS5 extended before the crash. I have it charging on the new hard drive and in the meantime bought a desktop computer in which I loaded CS5. Updates have been working fine on the laptop. I tried to update the program on the new computer, but continue to receive error messages. I have read in any problems and think maybe computer laptop harddrive that crashed had CS5 yet on it, as I was unable to turn it off because I didn't know he was going to crash. I am only able to load CS5 on 2 computers and if it is still on the destroyed hard drive so I'm not able to turn it off and so I presume that is why I can not download the updates on my new computer. I hope someone can help me. I want to keep CS5 on both computers. Thanks in advance bunch Kara
If you see excessive activation anomaly of counting, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and request an account reset activation.
If you receive a different error, what exactly is this error?
-
DV9810us not to recognize the new HARD drive?
Hello
I tried recently update my HARD since the 160 GB drive it is initially supplied with due to disk failure. I installed the new HARD drive (a 160 GB, 1.5 GB/S 5400 RPM WD Scorpio Blue) and when I go to start the computer, it will display the HP logo and options before going off after less than 5 seconds. It restarts then 3 more times, before loading any bootable media that I inserted. Right now, I have an external HARD drive that I am running Ubuntu off the coast of so I can at least use the computer at the moment.
At the BIOS screen, I'm going under Drive Diagnostics and it says IDE Device not found. I find this strange being the wrong drive I took out the laptop SATA. I inserted my Vista Ultimatex64 7 disc and when he asks an installation location, it says not found hard drives.
The new drive is not dead either, I have hooked up to my desktop via a port SATA extra and is easily recognizable.
You use the same drive connector in a cage and at the end of the old drive? I saw where a new drive connector seems to be the same, but they do not work.
Maybe you are looking for
-
I am using FireFox to connect to a webserver using TLS. I would like the ClientHello for the browser to include a TLS extension empty SessionTicket according to RFC 5077.A web search found "Web browsers which have implemented the TLS SessionTicket, f
-
Trying to raise events from a main vi. I created an example vi as a basic unit of a much larger program. The high level vi called a Subvi that contains a structure of the event. The Subvi works permanently and will close when the program is stopped
-
I have a great suggestion for Microsoft
Original title: i have better thinking Microsoft allow remote microphone or electronic things put your finger and the copy or file and stick again PC delete or move new PC windows touch? I'm not Steve Jones but well guess and do new imagine with the
-
What are some of the best Internet Security Suites available?
I ask this question because my subscription with McAfee Total Protection 2009 is in place, and frankly, I was very unhappy with it, so I do not anticipate use of McAfee products. Microsoft Security Essentials would be a good option, but it doesn't ha
-
How to plan to clear all alarms in Foglight on a specific date and time?
Here's what I want to accomplish informing a group of people that all alarms will be erased and then foglight removes all the weapons on a specific date and time .. 1 I'd like to be able to plan / create a rule or any other option available to use...