TURN TO THE PAGE THAT ASKS YOU 'WHAT USER '.

Similar Questions

• I can't find the page that shows you all the drawings that I can use as a theme.

  I want to change the theme of my page but could not find your page that shows all my choices.

  Hello!
  I hope that's what you're looking for:
  "Use themes to change the appearance of Firefox" http://mzl.la/1BAQGDX
  In case you want a specific add-on: you can find all modules of courses here:
  https://addons.Mozilla.org/en-us/Firefox/

• Having a problem with the message that ask you if "I want to close this window.

  I use a site that allows me to send cards to people.  I am a member and have paid my dues.  When I look at the animated map and click on continue that it does not do.

  I get a message from the Internet window explore who says "I want to close this page" if I say yes, it me bumps back to the previous page and allows me to send the card, if I say no, it remains open.

  What I want to do, it is to continue to write my message and then contacted the card.  I do not have this problem in the past and have not been able to reach a satisfactory solution.

  I opened the internet options on my internet explore and played around with some of the options in respect of the security.  It doesn't seem to help.

  Under Internet Options go to the Advanced tab and click the reset, it should reset all settings to factory default on your IE.

  If the problem is caused by a defective setting, this will take care of him. It will remove all the addon and toolbars, if you corrupt addons, this method will also take care of it.
  You will have to reinstall any addon is using the Web site you visit. (but after you have reinstalled the necessary addons, you should be fine).
  Hasta the proxima.
  Thank you

  Today, it was a good day, I didn't have to use my AK.

• "Since this update, everytime I open a window in a window, I get a box at the bottom of the page that comes up and asks me if I want to: open or save. Why this page open and not let me do my work?

  This box I cannot do what I want on the pages that I am. For example, I can't print... HELP :)

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  and make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  _________________________________________________________

• I get the following message when you use Safari and Firefox. Works in Chrome: "we're sorry, the link that brought you to this page is not valid."

  I'm working with my bank account online and I get to the homepage very well. When I select the online banking, estatements, I get the following message when it tries to link to the electronic statement page.
  "We're sorry, the link that brought you to this page is not valid." Chrome has no problem displaying this page, but Firefox and Safari gives me the same message.

  Note that I posted this already above, but don't not checked if she was tried.

  You may need to allow cookies from third party (visited or all).
  
  
  To view the history settings and cookies, choose:

  • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".

• I get a warning at the bottom of the page that warns against programming cross-how can I turn off this label

  Original title: cross stitching
  I get a warning at the bottom of the page that warns of a volleyball how the hell this label

  montanacowgirl,

  Do you mean the scripts? If so, please see the following:

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Internet-Explorer-help-protect-me-from-cross-site-scripting-attacks

• I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

  I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

  I didn't know, I had to disable before turning back, but now I don't have this option. Is there a way to disable these two licenses and activate again the good?

  Hi vasilisp36877173 ,

  Please see these items:- Learn how to enable or disable Adobe applications

  Solve the problems of activation and deactivation of Adobe and error messages

  Let me know how it goes.

  Kind regards

  Christian

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I have an element (Web page) on the new tab at the bottom of the page that will not respond to everything I do and I can't get rid of...

  It seems to take place, because I can't get 8 items on the page.

  You can zoom in on the page (hold down the CTRL key and press the key once or twice) to fit more.

  Firefox can not remember unless you also disable a setting. You can do so here:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.preload to change its value from true to false

  After the change, if you have any 'new tab' pages open, close them and open a new one change, the zoom setting and now we must remember.

  If you do not want to reduce the zoom level, there are some add-ons to change the page. What follows is often referred to:

  https://addons.Mozilla.org/firefox/addon/new-tab-tools/

• computer is stuck in the screen that lets you choose Safe mode or start normally

  Original title: stuck

  My computer is stuck in the screen that lets you choose Safe mode or start normally. When I choose that it just goes back to the same screen. stuck in this screen

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Should I open the pages that have been delivered safely?

  Original title: CANCEL = Popup = I want TO OPEN the PAGES THAT HAVE BEEN DELIVERED safely, ABOUT

  CANCEL = POPUP = I WANT TO OPEN THE PAGES THAT HAVE BEEN DELIVERED SAFELY, ABOUT

  Hello

  
  1. which browser is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  3. What is the exact error message?
  
  Perform the steps mentioned below, if you have Internet Explorer installed on the computer.
  a: Click on Tools > options Internet .
  b: click on the Security tab > custom level button
  c: Navigate to and Select the option to display mixed content.
  d: click apply , then ok.
  
  Hope this information helps.

• print all of the pages that have highlights

  My apologies if this isn't apparent. I've searched and searched. Acrobat X Pro running. At 1150 pages in pdf format. Want to search for and highlight several different words and phrases - then print ONLY the pages that have a word or phrase. Trying to figure out how to use bookmarks to do this - or something. Seems that this is a common need. Is it possible - without scripting something (that I have no time to learn how to make this project). Thank you.

  Hi swtrader2,

  I found this older article which may be just what you're looking for. You can use the tools of Protection of Document (drafting).

  The key is to not do the second part of the drafting process in two steps. The first step is just words; the second removes them from the document.

  The research and marking of multiple words in a PDF document

  You will notice that some option names are slightly different in your version of Acrobat (for example, you select text search & delete in the Protection component in the Toolbox). But I think you get the basic information you need of this clever workaround.

  Eager to learn how it works for you.

  Best,

  Sara

• The box that asks if I'd like firefox to remember this password is not pop up, how to activate it?

  I need to know how to activate the box that asks if I'd like firefox to remember this password.

  Normally when you install Firefox this feature is enabled by default. You can check the status in the Options dialog box:

  the button Firefox orange (or the Tools menu) > Options > Security tab

  In the second section, there is a checkbox for "Remember passwords for sites". These articles have more information:

  • Password Manager - don't forget, delete, modify and import passwords saved in Firefox
  • Use a master password to protect stored passwords and logins

  Now... some websites add code to the fields on their forms to block the AutoComplete (which blocks also save connections), so that you can find some sites where Firefox will not save the password for this reason. It may be some workaround solutions, we discussed several times for Yahoo! mail, for example, but since they are long to describe, please post if the problem is specific to the site and provide if possible a link to the login form.

• I would like to change the page that appears automatically when I open a new tab - this isn't my normal homepage, and I would do google

  My homepage is on facebook, but when I open a new tab, I wish that the page that opens on this tab to be Google. Inadvertently, I changed the default page to Pogo.games during a game download. How can I change to Google?

  You can use NewTabURL extensions to accomplish the same thing.

• I deleted pages by error, anyone know how to reinstall the pages? Thank you!

  I deleted pages by mistake with mackeeper, anyone know how to reinstall the pages? Thank you!

  First - get rid of MacKeeper - it will wreak havoc with your Mac. This is an absolute piece of garbageware. See this link for full instructions:

  How can I remove mackeeper to my macbook pro

  For re - download pages to your Mac, open the Mac App Store, and then click "buy". You should see that pages listed there with the button download beside him.

  Good luck

  GB