Turners (wait? () Icon)

Similar Questions

• I can not access the volume mixer. It is on mute, but when I right click I just get the 'wait' icon and then it just disappears

  Why my sound "will" cut when he chooses?  When I click on the speaker I just get the icon "pending" then goes.  Is this the only way I can get help with this question?

  Hello

  1. when the question is is produced?
  2. you remember of any changes to your machine before the question?

  Follow all the steps from the article below and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• PlayBook 'wait' icon spinner

  Hello

  Is the green "wait" animated image spinner available anywhere? It is one that is in the application of Message When you start the application, and when you drag to refresh the messages.

  Thank you

  Ron

  Hello

  I couldn't find what I was looking for. I created a gif animated spinner to match that of the native Messages app.

  

  It is a little rough but should suit my purpose. I'm this gives to the community and I hope that bbUI.js can make use for the inboxList.

  Ron

• Expect the icon display number in the table of Boolean

  Hello

  Can someone shed some light on a piece very little icon that I receive on a function 'boolean array number?

  I seem to be getting a little "wait" icon superimposed in the corner. The help context entry looks the same, and the feature looks the same (as far as I know).

  The piece of code that I use has been converted to a newer version of V8.5 but apart from who should have nothing unusual about that.

  The illustration below shows the offending icon with another who is fresh out of the palette next to him.

  

  Am I missing something?

  Thanks in advance for advice.

  All the best,

  Ian

  The wrong icon with registers for previous and the new 'sign Extension Modes' right-click menu options that have been added to this feature on the FPGA diagram in LabVIEW 8.6 or later.  The bug was reported as CAR # 122749 and should be fixed in a future release of LabVIEW.  Apparently, the function may return incorrect values when it has a weird icon, so I recommend you remove it and drop a new to the case where.

• BlackBerry Pearl 8130 Smartphones display icons

  I have a Pearl 8130 and problems with an icon on my screen.  I think it has to do with the calendar event reminder, but I have not received any notification and the icon will not go away.  It looks like a square with a dot in the middle (a bit like a VHS tape).  (Yes I just dated myself

  It's just boring - nothing wrong with the phone.  But I had problems with my Pearl because this is my second.

  Anyone have any suggestions?

  That would be an indicator of voice message from your operator.

  If you have a voice mail waiting icon wandering on your home screen:

  • Call your voicemail and clear the message.
  • You can call your BB from another and leave a message. You BB, call your voicemail and clear and delete your messages.
  • If the above fails, with your BB under tension - pull your battery to reset and restart your BlackBerry.
  • Change your theme and see if it persists and return to your desired theme. (Options > theme > select.)
  • Clean and reload your OS.

  Good luck.

• Playlists created using iMusic on device OS not updated by IMatch in iTunes

  If I create a playlist on my ipad, is not completely sync'd by iMatch in my iTunes library. The title of the Playlist is here but the content is grey and each track shows the icloud waiting icon. No matter how long you wait and no matter how many times you ask an update IMatch that nothing happens

  Restart iTunes does nothing no more. I missed a few small characters in what will make IMatch?

  Hello

  The titles have been added to your computer < you bought these titles on iTunes store?

  Jim

• Recently updated Firefox 3.6.13 Firefox 13 - crashes when you try to open

  I've been using firefox 3.6.13 for quite awhile; the reason why I have such an old version is because it's for a work computer, and an upgrade to newer versions in general is not homogeneous and can interrupt the working process.

  Anyway, I find some downtime and decided that I would be upgraded to the latest version of firefox. Every thing seems to install fine, and he copied all of my addons on apparently (which I am thankful for). How ever, when opening Firefox it opens and displays two tabs saying "connection", but nothing happens beyond that. It just completely freezes providing the "waiting" icon when you move it. I tried + 10 minutes waiting for what ever treat was to finish, but nothing happened. To close Firefox, I need to kill the process in Task Manager.

  I tried uninstalling and reinstalling, but the same problem occurs. I tried to search earlier, stable versions of firefox, but couldn't find anything.

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Zbook dock: Zbook Dock: appropriate equipment

  Is August 3, troubleshooting guide to sign must "click the remove safely icon in the notification area, at the far right of the taskbar".  Where is this icon?  I have the icon of love at first sight, but it does not offer any option to delete.  The link is:
  
  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=11122586 & docLocale = en_US & docid = emr_na-C0...
  
  In this same document he links to dock Zbook (4AA6-5088EEW) white paper that says for the cable, just pull "to remove the HP Elite docking station with Thunderbolt 3 or HP ZBook with Thunderbolt 3 in your HP laptop or HP ZBook Mobile Workstation, it is recommended to first disconnect the dock wait icon Thunderbolt (see Figure 3) in the system status bar is gone then put the laptop or. "mobile workstation in the waking state, hibernation, restart or stop.
  
  Which is correct?

  I think I solved the problem to my satisfaction, I hope it helps others.

  Also, I tried to get more information of HP chat support, but they left hear only the computer off and then unplug.  It would be the 3rd option HP (and the worst option) to follow no real clarity on the procedure of HP.  The Zbook attach end of nightmares?

  I believe that the white paper (4AA6-5088EEW, August 2016) made the most sense, although it may lack key information:
  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.PDF

  The white paper says to unplug the dock (without preparation), what seems dangerous to me.  Only, I'm ready to do if the USB devices plugged into the dock to comply with Windows "Rapid withdrawal" of the policy in the Device Manager settings.  The keyboard and the mouse need not of settings, since they are different profiles of USB.  Someone braver than I can try to ignore the parameters of "Quick release" to find out what's going on :-).

  The political "quick withdrawal" is not set, then if the option 'Remove the device safely' with the icon of USB in the bar of tasks, firstly, and THEN do the Zbook dock disconnect.  I think that's what the document online tried to say in words very confusing and lacking other details:
  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=11122586 & docLocale = en_US & docid = emr_na-c05060909

  So far, I didn't re-docking on the fly and disconnection problems.  I run all the latest Zbook 15 G3 drivers, BIOS 1.10 etc, for those who want to know.  More a few bug fixes for the Zbook dock and it will be a good product.

• 2004nl Pavilion p6: p6-2004nl restore OK and then nothing...

  I had 5 beeps. Something with the video. Bougth a new motherboard (used) solved this problem. For some reason, all restore options end up with eternal windows icon and a message (waiting icon rotation). I have an original 2 TB hard drive.  Also tried a brand new HD 1 TB with the same result.

  The motherboard is an AAHD2-HY (Holly?). My question is now a corrupted BIOS. But without an opperatiing running system, it is impossible to restore it. The tools I find are not compatible with a USB bootable DOS.

  Someone at - it a sugestion how to solve this problem?

  Thanks for your concern.

  This is the solution: it's my fault. The cable between the Mo and the jury of the antenna was in the wrong position on the motherboard. IK removed the connector (and the jury of the antenna, I don't use it) solved the problem! Sorry for all the confusion and thank you for your concern!

  Perry

• Satellite L670-12J - becomes inadmissible constantly

  Hello

  My Satellite L670-12J new running Windows 7 64 bit freezes constantly, usually a few minutes after the start of almost every time I turn it on. It becomes inadmissible: I can't change the application, view the Task Manager or activate the start menu. The mouse cursor moves, but displays the wait icon and I can't click anywhere. The hard drive light flashes on a regular basis, a quick flash once a second about.

  It does not appear to be linked to a specific program that I am running. I can get when the computer is idle or when I run a random application.

  The only way to recover from it turn the computer off (press and hold power for a few seconds). Once it restarts, it works without problem until the next time I turn it on.

  As I bought this week yet, should I go back to the dealer and ask for another or is there something I can do to fix this?

  Thank you
  Luis

  Hello

  Usually, these gels can be related to a hardware or software problem. You have installed all drivers for software once you've got the laptop?

  In General, before returning the laptop, you must reinstall Windows using Toshiba recovery disc. The disc can restore factory settings and if it s just a software problem, it will be fixed after reinstalling Windows.

  Otherwise you need the service help :(

• Cannot connect to Windows 7 after Microsoft updates

  After the most recent series of updates to one of our laptops set up and configured, the office went into the log on screen. There is one main user on this laptop. When we click on the user icon, however, user, accessibility, and stop icons disappear for a few seconds, the animated 'wait' icon appears for a while, then the entire screen darkens, and this goes back in the log on screen. We are never faced with the prompt of password or any other message. This happens if start us normally or in Mode safe. We also tried to commissioning in the configuration "last good known", but the same problem occurs. We can enter the recovery tools, but the only available recovery seems to be the restoration of the original configuration of the C:\ drive.

  Is there a work around known for allowing us to open a session?

  Critical data are synchronized on a network drive, so there is little emphasis on this front. We would like to just avoid having to reinstall applications (office 360, Norton, etc.) which may require additional assistance to cancel lost installation.

  Richard Luketich

  Thomas Bidwell

  https://social.technet.Microsoft.com/forums/Windows/en-us/72ebe931-3dfb-4544-ad5e-64d0d46105c0/fix-for-Windows-7-touchscreen-users-kb3097877?Forum=w7itproinstall

• PI 1.4 import maps IP 2.0?

  I know that a restoration of 1.4-> 2.0 database is not supported. However, if we export 1.4 XML mappings, can those imported in 2.0? I could not find any documentation on it. (We note some odd results, and PI 2.0 has been turning it is "Please wait" icon for a day now, as a result of the attempt to import).

  This is the best way... cards the export and import maps.  You just need to make sure that the WLC is added to the PI 2.0 first.

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• BlackBerry Smartphones unable to download apps

  Hello world...

  I have a little unusual problem, I can NOT download any application from Blackberry App World.

  When I select any application and 'click' 'Download' I wonder to accept 'Blackberry App World Blackberry payment Service additive to the Blackberry ID' and after accepting that I see "Please wait" icon for a few seconds, but after that nothing happens at all. "

  What should I do?

  Help, please

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • KB24200 Screen loops when BlackBerry ID or PayPal authentication is verified in BlackBerry App World storefront on the BlackBerry smartphone

  I hope that it contains something useful.

  Good luck and let us know!

• Recurring corruption VM

  I have a recurring problem with one of my vm images. It goes like this:

  1. I opened the VMware Workstation GUI and select the tab for the image named streams1

  2 VMware makes me it seems to be in use and wonder if I want to take charge.

  3. I know that the virtual machine is not in use. I select "own."

  4. nothing happens. If I select the tab streams1 once again, I am again asked to take ownership. I can't take ownership.

  5. I go to the directory of the virtual machine and rename all four directories that end with "lck" to "lck.backup".

  6. I have restart the GUI and select the streams1 tab.

  7. tab shows me the animation of waiting. The wait icon never disappears.

  What do you get?

  The virtual machine image can be recovered?

  How can I prevent this from happening in the future?

  Config:

  -L' host OS = Ubuntu 12.04

  -Guets OS = CentOS 6.4

  -Product = VMware Workstation 10

  See attached file vmware.log

  You can remove CentOS 64 - bit.vmx.lck?
  Also delete your * backup files - you don't need to save empty files.

  Did restart you because the problem appeared? -If not - try it.

• Dynamic action to refresh the region-&gt; see the message to user

  Hello

  I have a page in the apex 4.2.2.

  In this page, I have an interactive report and a filter sets, users can choose.

  When users choose one of the filters, I implemented a dynamic action to refresh the interactive report region, so it should refresh the data being shown without submitting it.

  So far so good... but... when the region is refreshing there is point 'charge of circle' which displays and allows the user to know he is done on the page. But this icon is not so obvious.

  What I want is to add a message, for example to display a region, which showed a message like "being the updating of the report, please wait" (something like that).

  I tried to insert in my dynamic action, as 1st action, to SHOW this area and as the last action to HIDE. But nothing is done, the region is never shown.

  How can I perform this task? All I need is to be able to display a message, for the duration of the dynamic action, to inform the user that he or she must wait until the task is completed.

  All real common actions have been reported to "wait for result", if I didn't get this wrong, it means that he expects the previous real action remaining to be done, in order to trigger the next... This should show the region and then hide it, but it does not work.

  Can someone help me with this? Maybe give an idea?

  Kind regards.

  You can actually go several routes with a solution for this. A refresh of the IR will start forward and after updating the events that you can hang on to dynamic actions or jQuery, so you can show something at the start of the update and then hide it again. And since you can do all this in jQuery you could easily hold it in a javascript file and attach it to every page of the ir. This is probably the cleanest solution and more independable.

  Another way is to use the already existing waiting icon and play with his presentation a little. You know, that you are talking about loading icon. You can change this to something much better with minimal effort!

  Example:

  Run when the page loads, to execute javascript code:

  $("#apexir_LOADER").append("
  Please wait. Refreshing the data.
  ");
  

  Add this css to inline css in the page:

  span#apexir_LOADER {
  display: block;
  width: 150px;
  text-align: center;
  background-color: white;
  border-style: solid;
  border-radius: 5px;
  border-width: 2px;
  top: 20%;
  }
  

  It'll make a little white box with black borders rounded around the loading icon and put a text below.

  You can get the html code to add a bit more generic, or you can raise some html of the page if necessary. You can put it in a dynamic action on the load, put in a js file, or whatever. The css can be put in a page template or a css file.

  It's only less independable hanging in front or after updating because we are taking advantage of the system in place, which means that maybe he could change in the future - but this is hardly on the same scale as the 'hacking' the ir for example javascript.