TV trimmer

On my TV with my 3rd Gen AppleTV in its default settings, the edges of the AppleTV are off the screen. I checked the settings on the TV, and there is nothing that my wife and I found that this changes.

There is a button on the TV remote that switches between the different settings of the image that causes this when the value of some modes.

Post your number of brand and model of the TV so that we can understand the right key to hit.

Tags: Apple TV

Similar Questions

  • 2015 first freezes on trimm

    This morning I've updated for first CC2015 and immediately, I fall on this issue

    When I try to trimm any kind of clip using the tool select the program hangs for about 15 seconds and then jumped to the new location of garnish

    Practically, if I do not extend edit, I am unable to do the simplest form of change.

    anyone with the same problem... or suggestions?

    Presentation of the material:

    Model name: Mac Pro

    Model identifier: MacPro5, 1

    Processor name: Intel Quad - Core Xeon

    Processor speed: 2.4 GHz

    Number of processors: 2

    Total number of cores: 8

    (By heart) L2 Cache: 256 KB

    L3 Cache (per CPU): 12 MB

    Memory: 24 GB

    Processor speed of interconnection: 5.86 GT/s

    Boot ROM version: MP51.007F.B03

    Version of the SCM (System): 1.39f11

    Version of the SMC (processor board): 1.39f11

    NVIDIA Quadro K5000:

    Chipset model: NVIDIA Quadro K5000

    Screen Shot 2014-11-05 at 4.17.31 PM.png

    STORAGE

    Available: 3.34 TB (3,340,379,062,272 bytes)

    Capacity: 4 TB (4,000,109,887,488 bytes)

    Mount point: / Volumes/EDIT_05

    File system: HFS journaling +.

    Writable: Yes

    Ignore permissions: No.

    BSD name: disk3

    Volume UUID: 5595E7DD-4A27-39E6-AE37-0C4219CE14E8

    Physical disk:

    Media name: EDIT_05

    Media type: rotation

    Protocol: SATA

    Internal: Yes

    Partition map type: unknown

    S.M.A.R.T. Status: Unsupported

    IMAGES (apple pro res FULL HD (1920 X 1080)

    WITH THE HELP OF MERCURY (GPU)

    Hi Eric,.

    Please go to the wrench on the timeline and deselect the option that says "Composite overview for Trim" and then check the behavior.

    Vinay

  • Trimmer tool Claim to Fame?

    I don't know how accurate the claim of tool shaper is, but it is not even remotely accurate.  I know it can be done with the railways,

    and it seems that I might have to create this shape with the paths because the results to create the shape you see here with the product router tool a circle?

    cnARXRVXoc.gif

    Hello

    Shaper tool is primarily used to create complex and beautiful designs in forms of drawing, stacking and put together and then simply the combination, merger, removing or moving them. Use simple gestures, visually intuitive to perform operations that previously would have taken several actions to achieve. Please see the link below for more details:

    Build new forms with tools Shaper and Builder shape in Illustrator

    Kind regards

    OM

  • Beachball days :(

    Everything was ok, for years, then Powerpoint crashed, VLC did the same thing and I was unable to really do anything else since.

    Do some research here, did reset the SMC, started in safemode, turned off and unplugged, made an another RAM reset, check the malware (Nothing) and did the EtreCheck (which I can not decipher).

    I uninstalled the application Memory Cleaner, but no change.

    Any suggestions?

    EtreCheck version: 2.9.12 (265)

    Report generated 2016-06-19 12:38:04

    Download EtreCheck from https://etrecheck.com

    Duration 66:34

    Performance: Poor

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Beachballing

    Description:

    Beach ball all the time, literally 3 times just writing this... While and it causes to the beach ball

    Hardware Information:

    iMac (27 inch, mid 2011)

    [Data sheet] - [User Guide] - [warranty & Service]

    iMac - model: iMac12, 2

    1 2.7 GHz Intel Core i5 CPU: 4 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1333 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1333 MHz

    0/DIMM1 BANK

    Vacuum

    BANK 1/DIMM1

    Vacuum

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Video information:

    AMD Radeon HD 6770M - VRAM: 512 MB

    iMac 2560 x 1440

    Software:

    OS X Yosemite 10.10.5 (14F1808) - since the starting time: 3 hours

    Disc information:

    ST31000528AS disk0: (1 TB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 999,35 go-go (618,79 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    HL-DT-STDVDRW GA32N)

    USB information:

    Apple internal memory card reader

    Computer, Inc. Apple IR receiver.

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. BRCM2046 hub.

    Apple Inc. Bluetooth USB host controller.

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Configuration files:

    / etc/hosts - number: 20

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / Library/Extensions

    [loading] net.telestream.driver.TelestreamAudio (1.1.1 - SDK 10.8 - 2016-06-18) [Support]

    Launch system officers:

    [loaded] 5 tasks of Apple

    [loading] 150 tasks Apple

    [operation] 57 tasks Apple

    Launch system demons:

    [loaded] 47 tasks Apple

    [loading] 136 tasks Apple

    [operation] 79 tasks Apple

    Launch officers:

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2014-09-14) [Support]

    [loading] com.google.keystone.agent.plist (2016-03-03) [Support]

    [loading] com.radiosilenceapp.agent.plist (2011-08-04) [Support]

    Launch demons:

    [failure] com.adobe.fpsaud.plist (2016-04-16) [Support]

    [loading] com.google.keystone.daemon.plist (2016-03-03) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    [loading] com.radiosilenceapp.nke.plist (2011-08-05) [Support]

    User launch officers:

    [loading] com.adobe.AAM.Updater - 1.0.plist (2014-09-14) [Support]

    com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

    [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist (2016-05-27) [Support]

    Items in user login:

    TomTom MySports connect Application (/ Applications/TomTom MySports Connect.app)

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Dropbox application (/ Applications/Dropbox.app)

    Hidden Google Chrome application (/ Applications/Google Chrome.app)

    Other applications:

    [operation] com.adobe.PDApp.AAMUpdatesNotifier.94888.F89F4ED3-C0DB-4DB1-8C9A-F8252D2C7362

    com.fiplab.MemoryCleanHelper [loading]

    [ongoing] com.fiplab.memoryclean.118460

    [ongoing] com.getdropbox.dropbox.14232

    [ongoing] com.google.Chrome.13664

    [ongoing] com.TomTom.mysportsconnect.1168

    [loading] 370 tasks Apple

    [operation] 158 tasks Apple

    Plug-ins Internet:

    AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2014-09-14) [Support]

    FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-22) [Support]

    QuickTime Plugin: 7.7.3 (2016-05-23)

    AdobePDFViewerNPAPI: 11.0.0 - SDK 10.6 (2012-09-24), [Support]

    AdobePDFViewer: 11.0.0 - SDK 10.6 (2012-09-24), [Support]

    Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-22) obsolete! Update

    Default browser: 600 - SDK 10.10 (2015-09-27)

    o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

    SharePointBrowserPlugin: 14.4.2 - SDK 10.6 (2014-06-04) [Support]

    googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-12) [Support]

    JavaAppletPlugin: 15.0.0 - 10.10 (2013-07-31) check the version of the SDK

    User Plug-ins internet:

    CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-26) [Support]

    Safari extensions:

    Video Converter - Wondershare - http://www.wondershare.com (2013-11-27)

    3rd party preference panes:

    Flash Player (2016-04-16) [Support]

    Time Machine:

    Time Machine not configured!

    Top of page process CPU:

    7% systemstatsd

    7% Google Chrome

    2% WindowServer

    2% launchd

    1% kernel_task

    Top of page process of memory:

    1.05 GB Google Chrome Helper (10)

    648 MB kernel_task

    Softwareupdated 483 MB

    Finder 246 MB

    229 MB Google Chrome

    Virtual memory information:

    1.05 GB of free RAM

    used 6.94 GB RAM (1.79 GB being cached)

    Used Swap 0 B

    Diagnostic information:

    June 19, 2016, 09:25:25 ~/Library/Logs/DiagnosticReports/G2MUpdate_2016-06-19-092525_[redacted].crash

    / Users/USER/Library/Application Support/CitrixOnline / * / G2MUpdate

    19 June 2016, 08:14:57 self-test - spent

    June 18, 2016, 14:06:25 ~/Library/Logs/DiagnosticReports/G2MUpdate_2016-06-18-140625_[redacted].crash

    June 18, 2016, 13:33:07 ~/Library/Logs/DiagnosticReports/quicklookd_2016-06-18-133307_[redacted].crash

    / System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. App/Contents/MacOS/quicklookd

    June 18, 2016, 11:07:08 ~/Library/Logs/DiagnosticReports/fontd_2016-06-18-110708_[redacted].crash

    /System/Library/frameworks/ApplicationServices.Framework/versions/A/frameworks/ ATS.framework/Versions/A/Support/fontd

    June 17, 2016, 19:56:20 ~/Library/Logs/DiagnosticReports/com.apple.photomoments_2016-06-17-195620_[reda DECT] .crash

    /System/Library/PrivateFrameworks/PhotoLibraryPrivate.Framework/versions/A/fram eworks/PhotoLibraryServices.framework/Versions/A/XPCServices/com.apple.photomome nts.xpc/Contents/MacOS/com.apple.photomoments

    June 17, 2016, 06:40:22 PM/Library/Logs/DiagnosticReports/App Store_2016-06-17-184022_ [redacted] .hang

    / Applications/App Store Store.app/Contents/MacOS/App

    June 17, 2016, 03:56:34 PM/Library/Logs/DiagnosticReports/El Capitan Cache Cleaner_2016-06-17-155634_ [redacted] .hang

    / Applications/El Capitan Cache Cache Capitan Cleaner.app/Contents/MacOS/El cleaner

    June 17, 2016, 15:49:07 /Library/Logs/DiagnosticReports/TextEdit_2016-06-17-154907_[redacted].hang

    /Applications/TextEdit.app/Contents/MacOS/TextEdit

    June 17, 2016, 15:05:33 /Library/Logs/DiagnosticReports/VLC_2016-06-17-150533_[redacted].hang

    /Applications/VLC.app/Contents/MacOS/VLC

    June 17, 2016, 15:05:33 /Library/Logs/DiagnosticReports/uTorrent_2016-06-17-150533_[redacted].hang

    /Applications/uTorrent.app/Contents/MacOS/uTorrent

    June 16, 2016, 09:10:52 PM/Library/Logs/DiagnosticReports/MP3 Trimmer_2016-06-16-211052_ [redacted] .hang

    / Applications/MP3 Trimmer.app/Contents/MacOS/MP3 mower

    June 16, 2016, 09:10:51 PM/Library/Logs/DiagnosticReports/Microsoft PowerPoint_2016-06-16-211051_ [redacted] .hang

    / Applications/Microsoft Office 2011/Microsoft PowerPoint PowerPoint.app/Contents/MacOS/Microsoft

    When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

    Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

    Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • springpad icon missing after ff upgraded 23.0.1

    Springpad icon does not appear in my toolbars tools or options to add again to my toolbar. When I open the page Add - ons I see it is now activated, but I can't use it.

    I looked into this a little further. The Springpad extension has been removed from the site add-ons and Springpad has launched a new extension named Springpad Clipper.

    According to the page versions to the old extension Springpad (in Google's cache), of 23/08/2013, this was published by Springpad on 21/12/2012:

    "This is the latest version that we expect to get out of this Add on Springpad Firefox. ... Soon, we will publish a new add-on based on the mower. At this time, we invite you to start using the new add-on trimmer as well as the web application at Springpad.com, where we will continue to make frequent updates to the support of all of our users. »

    More information about the change:

    You may need to disable the old extension (apparently broken) to avoid a conflict with the new. You can do so here:

    Firefox orange (or the Tools menu) button > addons > Extensions category

  • Video stuck on 'cancelled '.

    Was a report for a game after the video trimmer, I accidentally saved instead of exporting the video, after hitting cancel saving bar changed to say "canceled" on the subject and was stuck there for about 15 minutes now...

    Sorry no to not add this part...: is it possible for me to record this video or should I leave everything and give up the video...?

  • Pages - always keep a copy on iCloud drive

    Pages: Is it possible, or can be made possible in future updates, always store a copy of a Pages document on iCloud drive.  Most often, I want to save a document in its corresponding project on my computer, so he faints from iCloud, but I would like to have a copy stored in iCloud also.  Can there be a checkbox on the Save panel or preferences that says keep about iCloud copy... Whether or not the copy in my project folder synchronize is not important because the iCloud copy can be considered the "living" document but this default copy would be really handy.

    Hedge trimmer

    Very good suggestion. You can also create a duplicate for each document and save the double real on iCloud drive. Another way is to have the real project records on the iCloud drive with documents in there like normal and just have an alias on the desktop, etc. for easy access.

  • Audio tracks to follow tempo changes

    Hi all

    I'm really confused about something on Garage Band for iOS. Currently using an iPad with iOS 9.3.1 Pro 12.9.

    I started a new project, captured a loop of battery from another application (Anytune Pro in this case) and trimmed the loop so I could loop it and practice on top of it.

    I changed the tempo of the project and audio followed the project tempo change in an "elastic audio" way.

    What is happening now is that I tried to do again, and audio tracks do not follow the tempo change more! I don't know what I did different, I tried to reproduce several ways, but it simply does not work...

    Here is the link for the session, you can open it in your iOS device and change the tempo and you will see that the sequence (salsa one) will match the tempo of the session.

    https://www.dropbox.com/sh/swbfnj24qbuzhmn/AABSGk-zwc1GlMqxlYTMAhQda?DL=0

    If anyone can help me and explain how to make the audio tracks to follow tempo changes, I'll be very grateful! Thank you very much!!

    Hi flaviolira123!

    I can't open your file in Garageband (latest Version).

    But I think that you can only use Apple Loops loops to automatically match the tempo.

    I tried to loop an imported audio clip (import song, trimm)- but I do not have to be matching of tempo.

    I imported a DM1 via Interapp drum - but if I change the tempo of the project, my pace is in the old tempo...

    Have you found a solution?

  • SP3 updates and patches

    What does SP3 fixes related to Microsoft Office 2007?

    http://support.Microsoft.com/kb/2526086

    Overview of improvements after SP3 Office 2007

    • Documents requiring a custom security trimmer are not returned by alert search queries, even if the user who created the alert could see and search these documents.
    • The characters non-Unicode in certain error message strings now correctly view.
    • Four new bibliography styles are now available in the feature "Word citation and bibliography": Harvard Anglia, IEEE, sixth edition APA and MLA seventh edition.
    • The Chinese new year holiday is now included in the calendar in Outlook for Singapore.
    • Resolves an issue in which Excel 2007 crashes sometimes when you open an Excel workbook that is saved in a newer version of Excel previously. This occurs if the file uses a new feature that is not available in the Office system 2007.
    • Solves problems with the rules of pre and Post reform in the French thesaurus.
    • Resolves a problem in which encryption settings are not configurable when used with a converter pack compatibility file format and Office 2003 or an earlier version of Office.
    • Resolves an issue in which an incident sometimes happens when an Excel workbook is open in Excel, and then presented a preview using the preview pane in Windows Explorer.
    • Resolves a problem in which Excel Slicers and Ribbon customizations are lost when a XLSX file is first recorded as ODS file and then saved as a file XLSX in Excel 2007.
  • Toshiba 655 / windows 7 can run windows 10

    655 Toshiba with windows 7 never be able to run windows 10.  The list on the website of Toshiba is not Satellite 655 as one that is capable of upgrade to Windows 10.  My question is this: that I can do for this laptop to be upgraded to Windows 10, or he will never be able to run Windows 10?  I expect updates on your part, Toshiba, other owners a L655 and other forums with an answer to my problem!  I saw anything regarding my problem.

    I'm not someone who has the money to buy a new PC, and I don't like Windows 7.  But I read recently that you people will more or less force all the world to Win 10 and I did not speak of those of us who want to win 10, but own systems which are not compatible with it. I and others with the same question will be able to book a copy of Windows 10 once the year of free updates are passed?

    I checked 10 Windows and it looks like a BONE I could if more time to check it out. However being a faithful disciple of Microsoft, I always choose Windows NT as my first pic and Windows 7 as my second choice. They are almost identical and are very user friendly for those of us with the technology background. Until I retired from teaching, I had the opportunity to have and use Windows NT as an advantage for having participated in a seminar of MS-DOS in the early 1990s. Once I found Windows 7 I was just as happy with it as I was with NT. There, because I hope you can help me with my problem and send me a reply to the e-mail.

    Thank you for service and products that you have given the public has continued to progress in the world of technology.

    Leo Trimmer

    501 St E.

    Pawnee City NE, 68420

    * PII removed *.

    E-mail address is removed from the privacy *.

    or my main e-mail address at: * address email is removed from the privacy *

    Looking forward to your response and once again thank you for everything you do.

    1st off there is a forum led by peers, you do not directly contact Microsoft in any form of official duties. The site can be read by anyone, including your personal information. The forum software can pick up and block email addresses but not your home address.

    2nd it is down to the individual manufacturer if they will support their legacy hardware running the software update. Microsoft provides the pre version of the software to them, but in this case, it is entirely to Toshiba, if they want to support a particular device. That they would get no special recipe if it requires some investment is extremely likely. Perhaps that the system runs Windows 10 without additional drivers, but the original system specifications is very low. Forum Toshiba may have someone who has tried and you could experience yourself, just make sure you have backup an recovery options before you start.

  • How to prune the timeline?

    I just want to export the first 10 seconds or so of the timeline.  I have cut the animations (face and Lip Sync), but can't seem to cut the puppet itself.  When you choose file > export > scene, it exports 1100 + PNG files, I want only the first 120 or more.  I tried to cut the puppet, but never the trimmer slider as I do with animations.

    MacBook Pro

    10.9.5 OSX

    (Overview) character animation, 1.0.3


    timeline2shorten.png

    I zoomed in to make sure your time is dry 96. So at 12 frames per second, which comes to some executives of 1100. Simply change the duration to 10 seconds.

  • How can I call more than one video

    Trimmer!  I have a project where I need to use more than one video in my dashboard computer.  I am currently using ready composition on the main stage with a symbol called vcontainer.  Here is the code

    var vid = $("< vidéo largeur = '964' height = '530' contrôles = 'poster='media/bruce.png deles de contrôles" > "+)

    ' < source src =' . ' ' http://www.Movie.MP4 ' type = "video/mp4" / > ' +

    ' < source src =' . ' ' http://www.Movie.ogg ' type = "video/ogg" / > ' +

    ("< / video >");

    sym.getSymbol("SYM_SCREEN").$("vcontainer").append (vid);

    VID.attr ('autoplay', 'autoplay');

    VID.attr ('preload', 'auto');

    It works fine, but I can load only one video file.  I want to do is to have 15 buttons on my stage calling 15 different videos in the same model.  Right now, I have 15 different compositions of edge with the code above, calling the video source.

    Thoughts?

    See examples here - http://www.heathrowe.com/edge/videoMultiple/videoMultiple_b.html

    Download Sample - http://www.heathrowe.com/edge/videoMultiple/videoMultiple_b.zip

    Whats changed

    -container vid and B, C buttons are now part of a symbol called "vid".

    -Touch a symbol of calls 'vid' in the stage called 'container'element;

    S ' installs the original function in creationComplete of the symbol called "vid"Manager.

    HTH

    Darrell

  • Size of drop-down list changes

    Hello

    I need help, try to customize a drop-down window.

    I wanted to do a format that would allow the user in choosing one of these elements.

    Out of the following options in the drop-down list:

    Knife, jar, cutting board, mower, Weed Eater, Edger

    I wanted to arrange as follows in the drop-down list:


    Kitchen

    Knife

    Pot

    Cutting board

    yard

    Mower

    Weed Eater

    Trimmer

    While the six points in the categories are the only items to choose in the list.

    I have a test file with this information I can send it by e-mail

    Thank you

    The object drop-down list did not support this type of categorization of articles.

    Paul

  • Drawing of the object that is misaligned on bounding box problem

    Whenever I draw a shape with the object activated encompassing drawing that appears whenever it is selected blue is not aligned properly to the trimmer outside of the shape.  Like this:

    flashGraphicObjectProblemExample.jpg

    It is true that this is not a major problem, it's just a little unnerving, as especially when people that I am a teacher to use Flash ask why it looks the way it does.

    Does anyone else have this problem?

    Does anyone know if it can be fixed?

    Work raw forms but as you know, they can be difficult to work with, in some circles. I'm done in the direction of Fireworks CS4 for Peel, because he works so much better for most vector drawing.

    Hope there is a fix. I wish just that if you create a file in AS 2.0 and draw tiny shapes (zoomed to 800% or more) the bounding boxes are on-site. But if you click on the profile-> change in the properties panel, then replace the bounding boxes break in AS 3.0. Back to ACE 2.0 and all is well again.

    Thanks again for the responses / bug reporting (I hope this helps beesOnTarmac too)

    Raff

  • Problem with IIR in the generator

    Hello

    It's my first test with the report generator, and I managed to create custom labels, but I want to hide the empty address fields. Yet if one of the address fields are empty, I get a blank line, terminated by the comma that I added it to each line. This is my expression of the label:

    query. Title & "" & query. Acronyms & "" & query. First name & Chr (13) & Chr (10) &
    Trim (query. Address1) & "," & Chr (13) & Chr (10) &
    IIf (Trim (query. Address2) is ", DE(""), (TRIM (query. (Address2) & "," & Chr (13) & Chr (10) &)
    Trim (query. Address3) & "," & Chr (13) & Chr (10) and trimmer (query. City) & "," & Chr (13) & Chr (10) &
    Trim (query. County of) & "," & Chr (13) & Chr (10) &
    Trim (query. Postcode)

    It's the line causing problems:

    IIf (Trim (query. Address2) is ", DE(""), (TRIM (query. (Address2) & "," & Chr (13) & Chr (10) &)

    How can I get this to work in expression builder? I tried different combinations of quotes and symbols #, with and without the help of DE(), but they all throw the same error:

    «.. . is not a valid expression of ColdFusion. "

    I'm sure it's something simple I'm missing.

    See you soon,.

    Dave

    That's how I could make it work properly on mine:

    IIf (query. Address2 NEQ ", (QUERY. Address2 & Chr (13) & 10 (QUERY. Address2))

    Even if the address 2 is empty, it doesn't seem to like DE("").

Maybe you are looking for

  • Can not set the print properties

    Just loaded FireFox 4.0.1When I click onfileprintand the print window opens if I clickProperties to define the quality or black etc. only I getan error box that says:ErrorProp Res DLL not loaded I tried exactly the same thing using Windows internet e

  • Re: Tecra M9 - using the recovery disc

    Hello, can someone please help. I don't have a model Tecra M9. PTM90E-05700WEN serial No. Y76875H professional XP operating system. The problem I have is as follows - I would like to reset the machine back to factory settings, I have the product reco

  • Way to big icon

    Hi, everyone, I love my motorcycle G 3rdGen the only complaint I have is the size of the icons, the way large. I don't I can't change size unless I use a laucher and that of. What I had to do...Lenovo can you please help and resolve the issue of the

  • I want to link my facebook to yahoo account so I can see who is online on yahoo Messenger

    I can no longer see or talk to my friends on facebook my facebook unless a link to yahoo. I forgot how do

  • Cannot send windows mail error number ox800cccof

    Cannot send mail from windows stops working, then gives me error number ox800cccof I have 16 emails pending please help!