TV tuner does not work with SP1 Vista32 on Qosmio G30

Similar Questions

• Portege 2000 does not work with SP1 or SP2 & SD card problems

  Hello!
  I have some problems with my Portege 2000.
  1. I had to run Windows XP without Service Packs and updates, because when I install SP1 or SP2 for example, the Portege does not start after that (white screen). The laptop starts only in Mode safe so I can uninstall the Service Pack and it works again. What can I do?

  2. I also have problems with the SD card slot. Host and card drivers are installed properly. I tested it with a 128 MB and 512 MB SD card-> works very well. But readers don't read my 2 GB card. Is the controller too old to work with more than 1 GB card?

  Thanks for the help and sorry for my English :)

  Hello

  1.) Please check the document on the page of the Toshiba driver on the SP2 updates. It seems that you need to update some drivers and tools

  2.) Yes, it seems that the SD controller cannot manage a larger SD card sizes. In this case, you will need to use an external solution.
  Buy a mulitcard reader and connect it to the USB port. This player are cheap one should support several types of cards and sizes

• Satellite L20-183: PCMCIA Pixelview Tuner does not work with 720 * 480

  I have the following problem:
  I am the owner of a

  Toshiba laptop Satellite L20-183 (1.6 Celeron, 512 MB Ram, Ati radeon Xpress Mobile X 200)

  I just bought a
  Mobile TV Tuner PCMCIA (Prolink) Pixelview PlayTV havig the following specifications:
  http://www.ProLink.com.tw/English/products...ixelView%20Play TV%20Mobile.htm

  as you can see it it says he works at the frame size PAL: 720 x 576; NTSC: 720 x 480

  which is true, but not with my laptop
  It is functional on a laptop HP Celeron 2.8 Mhz, 512 Ram and Ati 9100 IGP

  on my laptop, it only works to the minimum framerate 320 * 288 (as I remember), but then the passage to the maximum framerate of 720 * 480 there are artifacts (horizontal lines) on the right size of the screen.

  I say it again on a similar notebook (talk configuration) with ATI 9100 IGP it works perfectly at maximum framerate.

  Someone told that can a card linked to overaly settings video problem, but it unlikely for me as long as lon semms as he worked on another laptop with ATI IGP 9100, which seems to be older than my video card. (By the way all the parameters and options are the same on two laptops)

  SOMEONE HELLLPPPPP!

  Hello
  Check the BIOS on the toshiba. BIOS in the video settings, there should be a possibility to change the PAL or NTSC. If the value is NTSC I see problems that you described. So as if you right-click on the desktop and select Properties, click on the tab on the far right, a last and properties then go to advanced. Under these properties, it must have an option to NTSC or PAL. Make sure that PAL is thus selected here and see if that solves the problem. I hope this helps.

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• DeskJet 712c does not work with Win 7

  I recently switched to a new win 7 Home Premium SP1 (64) my old XP computer which worked well with my printer.  The printer does not work with the new OS and the computer.  Even if the computer indicates that the device is functioning normally, the printer will not accept print orders.  Not even the printer print test.  There is no error reports but the system behaves as if the usb is not connected, even though it is.   There were no changes in connectivity before or after installing new software (or trying) trying to get the new computer set up.

  I just found it and tried the wizard of the printer which also implies that the usb is not connected even though it is.

  The compatibility options have done nothing to help.

  Tara,.

  EUREKA!  At the risk of party too early, it seems that I am able to print with my new computer (HP).  Fixed after almost endless hours trying to get my printer to work despite many internet messages saying it could not be done and other giving solutions that didn't work.

  Why o ' why the solution apparently a hidden secret and why the tools did not work?

  In any case, thank you very much.  With all the problems I'm having to migrate to Windows 7, it's a very important achievement.  Thank you, thank you.

  Chuck

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

  I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

  However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
  "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  What should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• It does not work with macbook air 2008! What should I do?

  It does not work with the macbook air 2008 os x 10.5.8. What should I do?

  What does not work?

  More details please!

• Why do code grayscaler site image Web does not work with Mozilla Firefox, but it does to another browser?

  I just noticed that my code (in my blog site), which is a regular code that allows the image to transform into its form in grayscale and cast its original color, does not work with the Mozilla Firefox browser. But with other browsers, it works. I hope you can help me with this little problem. Thank you!

  Should I use a CSS rule that is similar to:

  filter: grayscale(100%)
  

  This property is not yet implemented in Firefox. It is supposed to be implemented in Firefox 34, according to https://developer.mozilla.org/en-US/docs/Web/CSS/filter

• iCloud 5.2.1.69 does not work with Outlook 2016 (16.0.6965.2053)

  I installed the new iCloud (v5.2.1.69) and found that it does not work with Outlook 2016 (16.0.6965.2053). There is no button "Options"... "to"Mail, Contacts, calendars and tasks"(see photo). In addition, the iCloud Outlook add-in does not display in Outlook. I tried to reinstall the Office 365 and iCloud, but nothing has changed.

  

  I have exactly the same problem with the latest version of iCloud.  I have Outlook 2016 and 10 Windows and when I try to install iCloud there saying "set up" next "Mail, Contacts, calendars and tasks.  I left it for hours and it does not go beyond this point.  Outlook displays the listed add-in but it is not doing anything.  I tried to remove all of the Apple software, and then reinstall iCloud without result. I've deleted and reinstalled MS Office and then tried to reinstall iCloud - once again no luck.

• keyconfig does not work with FF 24.0. Is there a way?

  I just finished rebuilding my PC from a hard drive format. In doing so, I loaded the last 24.0 FF.
  Part of my essential app is a script used keyconfig causes a single copy to send the source page to the Clipboard, where the script analysis. Unfortunately, keyconfig does not work with FF 24.0.

  Writing for easy copy begins to explain how acting on a combination of keys, rather than the action of the mouse, without the use of keycopy - but then told how he has no need, because it's too much effort, and besides - keyconfig exists and does the job - which, I agree, he used, very well - but it is no more.

  What should do? If there is no other way, can I get a downgrade of FF that works with keyconfig?

  There is a new add-on, key config (note the space), but it does not what keyconfig did.

  The end of the thread main support doesn't mention a major problem in Firefox 24: keyconfig 20110522 - mozillaZine Forums.

  Did you install from source: http://mozilla.dorando.at/keyconfig.xpi

  Is the problem that Firefox won't let you activate keyconfig, but the dialog box opens, or you can activate or extension allows you to create shortcuts but they do not work?

• Downloaded the new firefox and it told me that it does not work with my software, how do I go back to my old version

  I have a mac 10.5.8 software. I downloaded moxilla firefox 24 and has replaced the old version to download. Then I got a message that firefox 24 does not work with my software. How to bring back the old version?

  Hello patcouse, if you want to stay with you older version of the OS, then firefox 16 is the last version available that will run in this environment. for a download link, please refer to the Firefox no longer works with Mac OS X 10.5 (at the end of the article).

• The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

  Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

  I thank in advance.

  ~ Mike

  I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

  Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• SQLite Manager does not work with the v11. Until make you it easier to go back to older versions or newer versions stop, breaking most of the modules I won't use Firefox

  SQLite Manager does not work with the v11. Until that make it easier to return to older versions or newer versions stop, breaking most of the modules I use FirefoxHow to come back at 10 Firefox?

  Update Firefox 23.0 which published yesterday afternoon.

  • https://www.Mozilla.org/en-us/Firefox/all/

• Norton Toolbar does not work with Firefox 17, provided Comcast Norton Security Suite, Win 7.

  I have Norton Security Suite provided by Comcast. Norton Toolbar does not work with Firefox 17.0.1 on my Win 7 machine. I lived all the questions on this topic and did all the steps and when I click on "Add-ons", he always says that the toolbar is not compatible. It works with IE, but I prefer to use Firefox.

  I had the same problem in the past. If you call customer Norton service toll-free they have always helped me start (without charges) when I have updated to a new version of Firefox - seems to happen every time even if I run the updates regularly. Hope that this phone help-Norton support is always very friendly and helpful-just Google their 800 number.