Two annoying when problems filming

Hello everyone. I just bought Sony DSC-W800 to shoot short films (1 minute max) as I am experiment some ideas and can't really buy cameras of spendy. From the outset I found two things extremely annoyings the filming of a video:

1 - the camera auto focus

2 - the camera auto adjust the brightness of each time that a new light entered the scene (for example as kindling a desk lamp)

is there a way to disable all the controls on the camera for videos auto? Especially auto focus and auto brightness.

Hussain_kw wrote:

is there a way to disable all the controls on the camera for videos auto? Especially auto focus and auto brightness.

You can't turn them off; You must move on, and unfortunately, the W800 offers no alternatives.

With other devices, you could switch to MF (focus manual) and M (manual exposure), but the W800 does not offer these options.

Tags: Sony Products

Similar Questions

  • Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

    Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

    Move on to the Discussion of Photoshop

  • How can I get two jobs when using two monitors, instead of stretching a desktop on both screens?

    Hello!

    How can I get two jobs when using two monitors, instead of stretching a desktop on both screens? I n ' want to clone my office, and I don't want to stretch it. I want two desktop computers, where I can "send/give" to the other desktop programs.

    I need a third party program? It is very good. If you know one please tell me about it.

    Hi OskarKvist,

    This feature is not supported by Windows XP.

    However, you can use your favorite search engine to download any third-party software that could serve the purpose.

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope the helps of information.

  • I have an iMac 3.06 GHz with only 4 GB of memory.  During last two weeks, whDurin the past two weeks, when I click on 'Edit', it does not hold the menu drop down.    Need my Mac 'cleansing' and how do I get rid of unnecessary files?

    I have an iMac 3.06 GHz with only 4 GB of memory.  During the last two weeks, when working with documents, buttons on the desktop did not have in the drop down menus.    How can I get rid of unnecessary files and wipe the hard drive?

    Drop down menus stay open at other times? Have you tried another mouse? More information please write an effective communities of Apple support question

  • How to stop opening two windows when I clicon an e-mail, home page link and the link both open. I want to just link to open

    How to stop opening two windows when I click on an e-mail link, the home page and the link that the two open. I want to just link to open

    I deleted cookies and tried to stop this site to open, but it opens, however, how to stop it! I have young children in the House and we don't need that sort of thing...

  • How to plot two variables when neither are expressed in time?

    I know how to trace a variable against time, but how to plot two variables when neither one of them are time against each other. For example if I want to draw Let's force against remote what is the best approach to use?

    Thank you.

    Use an XY Chart. Use context-sensitive help to see the expected data type and refer to the examples. Consider what follows, don't forget to rename the scale labels and name:

  • How to get Wordpad to not skip two lines when press enter in Windows 7?

    How to not skip two lines when I hit enter the cursor?  I'm making a list of titles without lines ignored.

    Original title: Windows 7, wordpad.

    Hello Thomasguy,

    Default Wordpad is set up for 1.15 lines after each carriage return. To change this 1 line do the following:

    1. open Wordpad

    2. on the look of Ribbon toolbar from wordpad in the Paragraph section

    3. just above the text alignment icons, you will see another set of icons.

    4. click the icon to the far right. This icon has a up and down on it and to the left of the photo icon.

    5. you should now see a list of spaces in the sentence. 1.15 is the default

    6. click on the space of 1 line.

    7. If you click the icon, to open it, you will see that a checkmark (tick) now appears next to the space of 1 line.

    8 when you now press Enter spacing should be 1 instead of 1.5

    This same icon, you can also change the space between paragraphs. The default value is 10pt (point).

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • How to add two lines when the second row is not visible, but also gets the first data line too?

    Mr President

    Jdev worm is 12.2.1

    How to add two lines when the second row is not visible, but also gets the first data line too?

    I want to add two lines like below picture, but want the second to remain invisible.

    tworows.png

    I asked this question but my way of asking was wrong, that's why for me once again.

    Concerning

    Try to follow these steps:

    1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

    2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

    3. in your bookmark create button to create only one line NOT 2 rows.

    4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

    5 - Open the generated class to EntityImpl and go to the doDML method and write this code

      protected void doDML(int operation, TransactionEvent e)
      {
        if(operation == DML_INSERT)
        {
          SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
          oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
          setJoinColumn(seqValue);
          insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
        }
    
        if(operation == DML_UPDATE)
        {
          updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
        }
    
        super.doDML(operation, e);
      }
    
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
      {
        PreparedStatement stat = null;
        try
        {
          String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
          stat = getDBTransaction().createPreparedStatement(sql, 1);
          stat.executeUpdate();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
        finally
        {
          try
          {
            stat.close();
          }
          catch (Exception e)
          {
            e.printStackTrace();
          }
        }
      }
    
      private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
      {
        PreparedStatement stat = null;
        try
        {
          String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
          stat = getDBTransaction().createPreparedStatement(sql, 1);
          stat.executeUpdate();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
        finally
        {
          try
          {
            stat.close();
          }
          catch (Exception e)
          {
            e.printStackTrace();
          }
        }
      }
    
  • I use two monitors when editing and that you want to disable the Preview on the right.

    I use two monitors when editing and in the past, I could edit in Lightroom on the left monitor and do other things on the right (ie. by email, netflix etc...) He wants to now that Lightroom allows you to show me a preview of some photo I'm working on my right monitor.  I can't replace it and turn off Preview.  Is it something within the program or I have to change something in my control panel? Help!

    ~ Anna

    Clicking here does not work?

  • How to display a .swf image when the film is disabled?

    I wonder how to display an image or a swf image when the film is not play. Any information appreciated. Thank you!

    A swf is never really off if it is displayed. But if you want something to show when there is nothing going on in the file, then just do sit in a frame with any content you intend to display.

  • Flash CS5.5 freeze problem when the film test.

    So, I worked on a new animation for several months and I've encountered a problem.

    Details: After exporting swf by testing the full movie, it plays the first four scenes, and then after that it crashes.
    Symbols to continue, but the film does not progress past this stage.
    I cut the scene, removed my vcam filters and even tried to run on an older version of Flash.
    I have read a few forums of people with similar problems and the general response is that they corrupted in their library files.
    Corrupted in the library files apparently have a "Preview not available" sign when you click on it in the library.
    After going through all my library items (this is more than in 2000) I do not have with this sign.

    I really need help I worked real hard on this project.

    Help, please! I use Flash cs5.5

    Thank you, Flip.

    It could be the result of exceeding the limit of the frame in Flash (16 000 images).

    Film size limit. Flash CS6

  • Explorer uses excessive memory/crashes when viewing film thumdnails

    on Vista, explore crashes when opening a file containing movies if you want to view thumbnails (film)

    Hi Sammisez,
     
     

    Let us try the two troubleshooting steps listed and check.

    Method 1.
    I recommend to uninstall third-party media players and then check if the problem exists. After you uninstall them, you can install them one by one and check what third party media player is at the origin of the conflict. Readers multimedia sometimes trati gone like winamp, DivX etc. do not cause these problems.

     
     
    Method 2.
    Check whether the problem is resolved in safe mode, and then perform a clean boot to find incompatible software.
    Step 1 Mode safe
    1. reboot your computer.
    2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
    3. using the arrow keys, select the desired option of Mode safe.
    4. press the Enter key on your keyboard to start in safe mode of Windows 7.
    5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
    6 do whatever tasks you need and when you are done, reboot to return to normal mode.
     
    Step 2. Clean boot
    You need to perform a clean boot to find the program that is causing and then disable or remove.
    Here are the steps to do:
    Clean clean boot:
    1. click on start, type msconfig in the search box and press ENTER.
    The user account control permission.
    If you are prompted for an administrator password or confirmation, type
    password, or click on continue.
    2. in the general tab, click Selective startup.
    3. under Selective startup, clear the check box load starting points.
    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
    5. click on OK.
    6. When you are prompted, click on restart.
    7. after the computer starts, check if the problem is resolved.
     
    If the problem is resolved to check what is the cause of the problem, referring to the link given below:
    http://support.Microsoft.com/kb/929135
     
    8. in addition, you will need to uninstall and reinstall the software problem on your computer.
    Reset the computer to start as usual
    9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
    Click Start, type msconfig.exe in the start search box and press ENTER.
    10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
    11. When you are prompted to restart the computer, click on restart.
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Yosemite MAC, when I open Firefox I get two windows, when I click on a link in mail, it opens a window not a tab.

    I place the FireFox icon in the dock. When I click to open FireFox it opens two windows both to the homepage. When you click on a link in the email, it will open a window behind the first window rather that open in a tab. There used to be a preference re: opening links, but given that it was useful, it seems that Apple has removed this option unless it's hidden somewhere I can't find.

    What you have is, in my view, two problems.

    • Homepage

    Type of topic: preferences #general< enter > in the address bar.

    There are two settings;

    • At the start of Firefox

    When the browser is started, what you want
    view. Many of us choose view my homepage.

    • Homepage

    When a new page opens up, what do you want displayed.

    1. Use current Page. Use the pages that are never open at this time.
    2. Use the bookmark
    3. Restore by default. topic: Home shows a home page of Mozilla with tools.

    You can use one of these as you want;

    topic: Home (Default Firefox homepage),
    on: newtab (displays the more visited sites),
    Subject: vacuum (a blank page),

    or you can enter any web page or Subject: page you want.

  • I lost two of my completed films

    Update iMovie and then a few days later I reorganized files events (movement of clips in folders different events). Later that day, I realized that two of the films that I had finished editing disappeared! I tried to cancel the shares, but as I had already x - ed out of iMovie I couldn't. I really hope that there is a way I can get back them.

    Since you updated to iMovie, I guess you run 10.1.1. Two missing projects appear when you click on the button of projects at the top of the iMovie window? Have you looked in the theater? How did you move clips from one event to another in iMovie app?

  • Re: Internal microphone Feedback makes it annoying when the loud noise from speakers

    Hello

    I have an annoying problem when I turn the volume on my speakers, there is a strong sound feedback from the internal microphone, I do not know how to get rid of. When I turn my speakers down it goes, but what's the point of having great speakers if you have them?

    Help, please!

    When you listen to music or watch an action movie, it's OK to have higher volume level, but what's the point to mount by a normal conversation on Skype or elswere?

Maybe you are looking for

  • Portege R600 / A600 and double output screen

    Hello Could you tell me if it is possible to output to two screens on the R600 or A600 with any of the Toshiba Docking solutions? I was told that it is possible, however I was told today by the sales of Tosh is not possible to do. I want to end my ho

  • Finder does not open

    Any ideas how to get my Finder to open it. I shut down the computer for a while, then at his inauguration Finder is inadmissible. I open a new message in Mail and click on it to attach it and he knocked down, but other that I can't ' search and I can

  • Mini 200 HP drivers

    Please tell me the divers of all windows 8 for mini hp 200

  • Client VPN crashes to secure the communication channel

    I created 2 pix to pix vpn connection on my pix506. Since my vpn clients cannot connect. We use Cisco client ver3.5.2 Journal watch customer severity invalid protocol id 3 MSG (0) Thank you * PIX CONFIGURATION *. Ver6.2 (2) PIX access-list 110 permit

  • Olympus PEN - F raw files

    Just bought an Olympus PEN - F and can not open the .orf nor with Bridge and Camera Raw files. Hope Apple Aperture could help.