Two different antennas on a single point of access

Similar Questions

• How can I add (gather) two different images into a single image?

  Well, I'm creating a HTML element / CSS Web site. I have two logos that I need to add to the header areas of the Web page. I thought that creating a chart would contribute to this question. I want to be able to add two different images (logos) into a finished product. However, I am having some difficult understand how to combine two different images on the same workspace (tab).  The images would be out there with text in the middle of the space. I would use the 2015 Photoshop, does anyone have and ideas?

  If it was me I open one of the images then go to Image--> the canvas size.  Then expand TI (relative check) of several (12) inches in width and height (choose to anchor the part you want to stay where he is.)

  Open another image and drag it in the first.  Or select all and then copy / paste If you wish, you can you should now have two images in the same file/tab.  Everyone should be on different layers.  Use the move tool to position them how you want.

  Finally go to Image > Trim and leave the default values.  He must cut off all the excess.  Save in any format you want.

  I hope this helps.

• Has used two different PC with a single product key supplied with my DVD to buy?

  Hello

  Sorry if the question is already asked.

  My friend has purchase DVD Ultimate to windows 7. There two which is 32-bit and 64-bit. But there is only one product key. A PC is already installed with 64-bit windows with this product key. If one pc to another is eligible for the installation of 32-bit windows with the same product key? Is this possible?

  If it is not possible, then why have 2 CD?

  Thank you.

  They are different architectures.  Use 64-bit 4 GB or more of RAM, 32 bit for 3 GB or less RAM.

  You can install one at a time.

  Clean reinstall Windows 10.

• Bug: Editor two different view on a single page?

  Hi all

  I use WebCenter Portal 11.1.1.8 and I encountered a problem with the page execution on space (Webcenter Portal). I created a new portal with the default parameter and create a new page with the name is "New Page" with the Style of the blank Page and ID = "newpage". In the Source tab, I see code like this:

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < = xmlns:jsp jsp:root ' http://Java.Sun.com/JSP/page "xmlns:pe =" " http://xmlns.Oracle.com/ADF/PAGEEDITOR "cust =" http://xmlns.Oracle.com/ADF/faces/customizable "xmlns:f =" http://Java.Sun.com/JSF/Core "xmlns:trh =" http://MyFaces.Apache.org/Trinidad/html "xmlns:af =" http://xmlns.Oracle.com/ADF/faces/Rich "version ="2.1"> " "" ""

  < jsp:directive.page deferredSyntaxAllowedAsLiteral = "true" / >

  < jsp:directive.page contentType = text/html"; charset = utf - 8 "/ >

  < f: view >

  < af:document title = "#{pageDocBean.title}" id = "docrt" > "

  < f: facet name = "metaContainer" >

  < trh:meta name = "keywords" content = "#{bindings." SEO_KEYWORDS} "/ >"

  < / f: facet >

  < af:form usesUpload = "true" id = "f1" >

  < af:pageTemplate value = "#{bindings.shellTemplateBinding.templateModel}" id = "T" > "

  < f: facet 'content' = name >

  < pe: pageCustomizable id = "PGE1" >

  < af:panelGroupLayout id = "pgl1" layout = "scroll" styleClass = "WCSchemeCustom" inlineStyle = "" >

  < cust:panelCustomizable id = rendered = "#{bindings.showHeader"hm_pnchdr"}" layout = "vertical" showTabAction = "true" / > "

  < af:panelGroupLayout id = "pgl2" layout = "vertical" styleClass = "AFStretchWidth" >

  <trh:tableLayout id = 'tl1' width = '100% ' >

  < trh:rowLayout id = "rl1" >

  "< trh:cellFormat id ="cf1"rendered =" #{bindings.leftWidth! = "and bindings.leftWidth! =" 0% "}" width = "#{bindings.leftWidth}" valign = "top" >

  < cust:panelCustomizable id = "hm_pnc1" layout = "scroll" showTabAction = "true" / >

  < / trh:cellFormat >

  "< trh:cellFormat id ="cf2"rendered =" #{bindings.centerWidth! = "and bindings.centerWidth! =" 0% "}" width = "#{bindings.centerWidth}" valign = "top" >

  < cust:panelCustomizable id = "hm_pnc2" layout = "scroll" showTabAction = "true" / >

  < / trh:cellFormat >

  "< trh:cellFormat id ="NF3"rendered =" #{bindings.rightWidth! = "and bindings.rightWidth! =" 0% "}" width = "#{bindings.rightWidth}" valign = "top" >

  < cust:panelCustomizable id = "hm_pnc3" layout = "scroll" showTabAction = "true" / >

  < / trh:cellFormat >

  < / trh:rowLayout >

  < / trh:tableLayout >

  < / af:panelGroupLayout >

  < cust:panelCustomizable id = rendered = "#{bindings.showFooter"hm_pncftr"}" layout = "vertical" showTabAction = "true" / > "

  < / af:panelGroupLayout >

  < f: facet name = "Publisher" >

  < pe: pageEditorPanel id = "pep1" / >

  < / f: facet >

  < / pe: pageCustomizable >

  < / f: facet >

  < / af:pageTemplate >

  < / af:form >

  < / af:document >

  < / f: view >

  < / jsp:root >

  You pay attention to the red line. Here you can see the body of the page, we have 3 columns.

  If you click on the Edit link, you will still see the page in edit mode with 1 single column in the middle (this is normal).

  In the tree view of pages, I create a new link object has ID = "newlink" The link is to 'New Page'.

  (a) arrived to the New Page , I click on the view link to see the page on the portal and then press Ctrl + Shift + E to go into edit mode and here I saw that it is normal with 1 single column in the middle of the page.

  (b) after that, I try to go to the New Page in another way with the link , I create above. And I always display the normal News Page . But when I press Ctrl + Shift + E to go into edit mode, I saw another screen, not like the screen I saw in step a. "We have 3 column in the middle of the page"?

  
  

  You have an idea about this?

  Thank you very much!

  Post edited by: AS84

  Yes, I see the same question in WebCenter Portal 11.1.1.8.6 but switching back and forth between a Page and PageLink cope (via Ctrl + Shift + E) - began to show a box or a column by the suite and the issue is not seen any more that it overrides the settings of the page.

  Another option that I tried and it works for me. Steps are the following:

  Create a copy of the blank Page Style

  Click on change the Source

  Delete the columns or the code for leftWidth and rightWidth ONLY that resembles

  NOTE: Do NOT remove the centerWidth.

  ----------------------

  ----------------------

  Now, create a new page (say MyNewBlankPage) using 'Copy of the blank Page Style' with all the default options (left: 0%, Center: 100%, right: 0%)

  Then, create a new Page link pointing to "MyNewBlankPage" with the value of the parameters as the left: 25%, Center: 50%, right: 25% and click Save

  Show portal, access MyNewBlankPage and press Ctrl + Alt + E for edit to new message and now you will see only 1 box or column of composer.

  Return to the view portal, access the link to the MyNewBlankPage page and press Ctrl + Alt + E to edit the composer. Again, you will see only 1 box or to the composer instead of 3 boxes or 3 columns (i.e. it is not replacing the Page settings when I used the new style (based on the Style of the Page blank) page in which I had removed left & right columns.)

  Also, it seems that this problem is resolved in 11.1.1.9.0 that I am not able to reproduce it.

• Two different databases in a single RPD

  
  Hi all

  is it possible to have the oracle and Teradata connections pools in a unique RPD. If so is there any impact. Please suggest

  Yes it is possible. No there is no impact whatsoever. You can have 50 different sources connected to any type of technology that is supported by the RPD.

  If you look at SampleApp you will see in this RPD only a ton of data types and distinct sources:

  

• Passage of a setting for two different queries on a single page

  I followed tutorial ADF - value of the parameter passing between Pages. It works very well, but I tried to add a second query to the page single.jspx , using the same setting and it shows all the data.

  I tried to analyze the queries and the problem is in bind variables. While the first query gets the right value, the second Gets null (see the log below). I also noticed that if I return to the single.jspx page, only the first request is executed.

  < oracle.adf.model > < ViewObjectImpl > < buildQuery > < [3556] SELECT ServiceRequests.ASSIGNED_DATE,.

  ServiceRequests.ASSIGNED_TO,

  ServiceRequests.CREATED_BY,

  ServiceRequests.PROBLEM_DESCRIPTION,

  ServiceRequests.PROD_ID,

  ServiceRequests.REQUEST_DATE,

  ServiceRequests.STATUS,

  ServiceRequests.SVR_ID

  OF SERVICE_REQUESTS ServiceRequests

  WHERE (ServiceRequests.SVR_ID =: p_svr_id) >

  < oracle.adf.model > < ViewObjectImpl > < getPreparedStatement > < ViewObject [3557]: [oracle.srdemo.model.ServiceRequestById_VO] AppModule.ServiceRequestById_VO1 created new QUERY statement >

  < oracle.adf.model > < ViewObjectImpl > < bindParametersForCollection > < [3558] params for ViewObject Bind: [oracle.srdemo.model.ServiceRequestById_VO] AppModule.ServiceRequestById_VO1 >

  < oracle.adf.model > < OracleSQLBuilderImpl > < bindParamValue > < [3559] param 'p_svr_id' liaison: 111>

  < oracle.adf.model > < ViewObjectImpl > < buildQuery > < [3716] select svh_date, service_histories where svr_id =: p_svr_id order of svh_date >

  < oracle.adf.model > < ViewObjectImpl > < getQueryHitCount > < [3717] number of rows estimated for ViewObject: [oracle.srdemo.model.ServiceHistoryByRequestId_VO] AppModule.ServiceHistoryByRequestId_VO1, query statement: >

  < oracle.adf.model > < ViewObjectImpl > < getQueryHitCount > < [3718] ' SELECT count (1) FROM (select svh_date, notes from service_histories where svr_id =: p_svr_id order of svh_date) ">"

  < oracle.adf.model > < ViewObjectImpl > < getQueryHitCount > < [3719] Bind params for ViewObject.getQueryHitCount: ServiceHistoryByRequestId_VO1 >

  < oracle.adf.model > < ViewRowSetImpl > < doSetWhereClauseParam > < [3720] ServiceHistoryByRequestId_VO1 ViewRowSetImpl.doSetWhereClause(-1, p_svr_id, null) >

  < oracle.adf.model > < OracleSQLBuilderImpl > < bindParamValue > < [3721] null of type 12 for connection "p_svr_id" > ""

  I got it.

  I need to add an another ExecuteWithParams of the request on the other in the pageflow.

• By using two different accounts on a single computer

  I have Adobe accounts for workers and businesses - the cloud photography plan with my personal account and Acrobat with my business account (employer). Is it possible to merge these two so I can use them while I'm at work? It's really embarrassing when I sign into one account and in another if I want to use a program or another...

  Unfortunately the individual & the CC company can not be merged.

  Concerning

  Stéphane

• Reports from two different domains

  Hi all
  
  Is it possible to account for two different subjects areas, i.e., a report that contains fields from two different areas? If so, how could we select fields from two different disciplines in a single report of responses?
  
  Thank you!!

  One thing to understand is that if you're imagining having two areas (SAs) poster and then by dragging the columns of each in your application without any preparation, then no, that cannot be done. You would need to make a join in the MDB layer and expose the column of the second subject area in the presentation layer.

  But if you indeed interested in UNION (or cross) queries, then do this:

  Build your first application in the first SA in the usual way. Note the number of columns and the data types of each column.

  Now at the bottom of the workspace of criteria, there is a button called "Combined with application similar." Until it clicks.

  Select your second. You will notice that the contours of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.

  Once you select your columns and your filters, click result. (Oh, you need to decide what kind of combination you want - click the menu drop down.) The result will be a new application that has data from two SAs in the query and combined in the way you select (union, intersection, etc.)

  This should give you a start.

  They are now, some 'useful' or 'correct' points for users on this thread...

• WAP321 two Pat same SSID on the same piece with the installation of single point / cluster

  Hello!

  It has bought several WAP321.

  We have a room which has about 40 books, so I will deploy the two Pat in there (according to recommended 20 clients per WAP on specifications).

  I configured the first WAP, created a cluster and the SSID, then joined the second WAP to the same cluster with the installation of single point, he received the same cluster radio settings (SSID, WPA2 key, etc.)

  My requirements are:

  1: configure all laptops with the same unique SSID created on the WAP (which has spread to the second WAP via single point of installation/cluster)

  2: having the laptop connect automatically to one of the Pat.

  3: If a WAP fails, the laptop can connect automatically to the other.

  Is this possible?

  If Yes, are the measures taken are correct, or is there something else? (and how does the cell know what WAP to connect if two WAPS is configured with the same SSID?)

  Thank you very much!

  Hello

  Thanks for posting your question on the forums.

  Setup you had set up will work fine for your application, I highly recommend to make sure that you have two AP running on different statically assigned channels, you can put one on channel 1 and the other on Channel 6 or 11. This will prevent them to conflict with each other.

  Now, there is no real way to select what AP you connect or even know that you you already connected to without special software, in fact, when a device gets on the network and seeking to connect to the radio will connect to the first point of access that meets the demand, if it is no longer available then it forwards the request again and it will connect to one who works.

  I hope this helps. Please let us know if you have any other questions

• Finished samples timed material vs single-point: different speed?

  Hi all

  Although I had several questions about this request before that separately have been resolved, there is one last thing that remains difficult.

  Shortly:

  My application acquires data from 2 analog and synchronous inputs on 2 channels of analog output.

  There is a trigger stop set on a PFI-pipe with a single switch. To make of this

  I had to switch from single-point over acquition timed work material.

  This set works very well when I read not less then a 100 samples once with a sampling of 1000 Hz. frequency (when I go below a sample of 100 to read--> E-200279)

  Ideally, I would like to read about 10 samples with a sampling frequency of 1000 Hz.

  However, using single-point timed equipment acquisition I can easily do that without a problem. Even just reading

  a single sample once with a sampling frequency of 1000 Hz does not have a problem. But impossible to use the block of relaxation of reference as a signal to stop with this setting!

  Question:

  For me, there are two solutions, but so far I could not work on one of them:

  (1) build a stop trigger in an single point of timed material acquisition

  (2) change something in the acquisition of finished so that I can read faster.

  Any suggestions, what causes the difference between the two speeds to be able to read the data and a way to solve it?

  Thank you

  Mark

  Mark,

  I mocked how I think I would like to address the issue and tied it to the top.  The general idea is that we use HWTSP for our analog I/o and counter looking edges on our signal "stop".  Each iteration of the loop, we check if we saw the stop signal.  If we have, then we write zero for the output channels and stop the loop.  If this isn't the case, write us the data of your comments, we have calculated.  I've added some comments on the block diagram that I hope are useful.  I have currently no any material of series E share, so it may not work properly out of the box, but I thought it would point you in the right direction.

  I offer this precaution:

  Windows is not a real-time operating system.  Therefore, it may take the liberty to give as much CPU time to other processes or applications as he likes.  As a result, it is likely that you will not miss a few samples (IE, your loop will not go faster hardware issues are examples of clock).  I configured DAQmx must return a warning you when this happens.

  Hope that helps,

  Dan

• How to use two different versions of the stub of Web Services SDK files in a single project (5.5 and 6.0)

  Hello

  I have a project that uses the vSphere 5.5 management SDK (I built the stub files according to the documentation) and have these in my c# Solution. Everything works beautifully. My class files that interact with vSphere all have a use statement as follows:

  using Vim25Api;

  All fine so far.

  Now, I want to be able to provide support for a user to connect to vSphere 5.5 and 6.0 vSphere environments. I built the stub files for vSphere Management 6.0 SDK and those in my solution presented in a separate project. Each project is based on a different class library and I have each set of files for each version of vSphere stub in different NuGet packages. However, when I select to use a vSphere 5.5 connection, it seems that internally the 6.0 files stub are used, or vice versa.

  I tried to separate things out by giving the Vim25Service.dll and Vim25Service.XmlSerializers.dll files for each version of alias names (alias by default for all assemblies is "global", but I changed it to vSphere5 and vSphere6 for each version. Then at the top of each class file before all with what I'm doing:

  extern alias vSphere5;

  or

  extern alias vSphere6

  (According to what project I'm in). Then, use the using statement for each class file that interacts with vSphere using vSphere5::Vim25Api; or using vSphere6::Vim25Api; to use the files to correct/stub namespace for each version I support.

  However this still doesn't seem to work, and things seem to be getting confused upwards somehow. I take a guess that internal files make calls and somehow have crossed.

  Is it possible to use two stub version of vSphere together different files in the same project? How should I handle my script? I thought of just upgrading to use the version of vSphere 6 (I can always connect to vCenter 5.5 using these, but some of the properties on the object have changed, (for example some dynamic properties on AlarmObjects and other items have been removed and code breaks if I delete the references to the stub vSphere 5.5 files.) So, I want to keep two different versions and use each of them separately in the same solution, so I support vSphere 5.5 and vSphere 6.

  Solved - this using wsdl.exe and just by specifying a different namespace to use in the proxy class that is generated by using the /n switch.

  for example using PowerShell to build automatically, the value $VimApi and do:

  WSDL.exe/n:$ VimApi...

• The way of writing to a wireless bridge between two different routers.1:broadband and dir 2:dlink 605 l

  I want to bridge.and wireless I can't do that... Please send me how to write to a wireless bridge between two different routers.

  1:broadband
  and
  2:Dlink dir 605 l,

  Hi Mohammed Ehsan Jourah,.

  Thanks for posting the request in the Microsoft community forums.
  I understand that you need to know how to make a wireless bridge between two different routers

  What version of the operating system is installed on the computer?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  You can try the steps at the bridge between two different routers wireless.
  a. determine the coverage area. When using two or more routers, the coverage area should be divided, and each router should be placed in a central location in each subdivision. If you add a wireless router to an existing network, this may mean moving the first router.
  b. decide which router is the main router. The main router is connected to the Internet, a LAN cable or other networks. It should be as close to the wired network connections or who has the best line of sight to another wireless network. In addition, the main router should be a high range router, allowing large tables of State and more users.
  c. buy a spare antenna, as the antennas that come with most routers do not have very good range. Quality omnidirectional antennas can push the range and signal strength of each of the routers, which, in turn, will reduce the cost by allowing routers less cover more space overall.
  d. deploy the primary router carefully. This router is the most important and requires most of the time of installation and options. Set the WEP (Protocol) encryption Service Set Identifier (SSID) and wireless, set up the Internet connection and test the router with some clients (computers). Once you get the main router deployed, deploy other routers should be easy.
  e. deploy the secondary routers, which must be configured to operate in "mode of transition." Secondary routers should be deployed around the perimeter of a large area or 'hot spots' where users placed - for example, will convene a bench Park or the table.

  Links:
  Create a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-network-bridge

  Add a connection to a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-connection-to-a-network-bridge

  Hope this information helps you. If you need to get help or information with decision-making wireless bridge between two different routers, I'll be happy to help you.

• connectivity between 5508 and two different 4507 switches

  Hello

  I've implemented with 5508 controller which is connected to two different chassis (Cisco 4507 switches). I have some doubt about the configuration of the interface on 5508 WLC.

  How can I configure the AP Manager interface with two physical ports on different chassis?

  If I have understood correctly, we can configure the AP manager interface with a single port

  In my introduction, we configured HSRP chassis mentioned...

  Please light up on this confused concept.

  How can I configure interfaces with two physical ports on two different chassis?

  If someone could send examples of configuration, it would be very useful for me to procees with.

  Already there are request to that effect in the cisco forum, but I did not understand correctly.

  Response would be appreciated.

  Hello

  I advise you to go through the doc:

  http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mint.html.

  For Cisco 5500 series controllers, you are not required to configure an interface AP manager. The management interface is as an AP-Manager interface by default, and access points can join this interface.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Styles of different notes in a single document - another approach

  Hello

  I'm working on a book that contains two types of notes:

  • original notes of the author of a book - up to three on a spread, numbering restarts at each broadcast
  • notes from the editor of the current edition - compatible numbering throughout history

  I've prepared two different paragraph styles for them. The two types of notes may appear on a single page (some of them are even nested - comments from the editor of notes of the author, but we'll leave it for now).

  I am aware that InDesign supports not multiple reference styles. I searched for the possible workaround on this forum and on the web, but could ' t find a satisfactory solution. Then I tryied on my own - my attempts are described below. It would be great if someone could suggest a better solution or fix my approach:

  A. use standard notes feature for first style and anchored objects for the second:

  1. Create anchored some notes text blocks
  2. Apply an object style that moves to the bottom of the main text block
  3. Apply the paragraph with numbering style
  4. Creating a cross-reference (working as a reference number in the text) pointing to the paragraph number

  That works very well with one exception - if there is more than one false note on a page (and oh yes, there are), they simply overlap rather than be stacked at the bottom of the main text block. I was hoping to solve that by using the wrap text property, however it has turned out that wrapping does not work between two anchored objects. Their adjustment position manually would be a pain in the case of any change.

  B. let all notes as notes, but hiding their numbers

  1. Leaving the two types of notes as standard InDesign notes (so that they are correctly placed at the bottom of the text)
  2. Hide a number of reference in the text and a reference number using character style
  3. Styles of different paragraphs of Appling two to the text of the notes, with two different styles of numbering
  4. Creating a cross-reference as A solution and placing it after the hidden reference number

  This one seemed smart enough, until I discovered this numbering does not work in the set of notes (each note is numbered '1'). InDesign seems to treat as separate stories, regardless of what the parameters of numbering of lists. AAARGH.

  C. let all notes as notes, hiding their numbers, creating objects of the lively with reference numbers

  1. Leaving the two types of notes notes standard - like solution B
  2. Hide a number of reference in the text and a reference number - like solution B
  3. Appling different paragraph styles both in the text of the notes, but without no numbering
  4. Inserting a block of text anchored after each number reference (hidden) in the text
  5. Applying numbering to anchored text frames (using the paragraph style)
  6. Insertion of a reference at the beginning of each reference text, pointing to the numbering of the corresponding anchor text block

  This can actually work, but for me it is neither elegant nor reliable. For now I am stuck looking for a way to insert cross-references in the text of the notes automatically (there are about 250 notes, then that would be useful).

  So that is where I am right now. All advice?

  Thanks for reading all this

  Waldek

  IMHO, the cooler is to make invisible the base (appeal and references) numbering notes replacing the note calls by a block of text, anchored with automatic numbering [2 = object styles styles para 2 + 2 lists numbering] and references the references on those paragraph styles 2 remark.

  If you need a numbering on doc, easier, but if for example per page, just restart the 2 numbers per page for each page!

  As the only 250 notes, do this manually! Not really need a script! It's very fast! (~ 1 hour to do!)

  Of course, when it's done, let's do it!

  

  On all the doc:

  

  Per page:

  

• This virtual machine may have been moved or copied during the priming two different Macs from the external SSD drive

  I am using this SSD external boot drive to start two different iMacs at work and home, making all my stuff to update this SSD.

  However, when I open the virtual machine in Mac OS X Server 10.6.8 (Snow Leopard) on VMware Fusion on OS X 10.8.3 5.0.3 (Cougar) installed on startup such external SSD disk, VMware asks what follows by trying to open the virtual machine on the FIRST Mac:

  "This virtual machine may have been moved or copied. In addition, I saw:

  Q.) VMware tells me: "this virtual machine may have been moved or copied. What should I do?

  VulnHub - Frequently asked Questions

  Choose "I moved it", or "I copied it"?

  Is it possible to PREVENT VMware Fusion ASKING such question with each single switch to Mac (as said, I always start the two Macs at work and home from the same SSD drive)?

  Thank you.

  VirtualMac2009 wrote: WoodyZ, the "Mac OS X Server 10.6 64 - bit.vmx" has a lot of lines. I understand that I should just stick

  UUID.action = 'keep '.

  the last line and save. Right?

  The order of placement of the options in the .vmx configuration file are not relevant as long as each is on its own line.

  On the other hand, I hope than boot from SSD external drive to start two different Macs (one at work and one at home) will not break she like says dlhotka.

  The main issue will be the differences between the CPU and according to what difference, say a Core 2 Duo vs Quad Core this by itself may be sufficient to trigger WPA on a Windows Virtual Machine.   Like many a Client in Mac OS X or OS X Client that shouldn't be a problem however with Mac OS X Server or OS X Server so that I moved it with a Core 2 Duo vs Quad Core, I have not had problems yet but the haven of the exhaustive tests with the server version.  I think it will go well, however, we should always do... maintain appropriate backups!

  Post edited by: WoodyZ - point makes it dlhotka about snapshots is a very good and must be taken into account! ;)