Two external LCD on Satellite Pro P100-324

Similar Questions

• Satellite Pro P100: losing picture on external monitor when using the DVI - D connection

  Guys,

  I have a Samsung SyncMaster 940MW LCD TV and a Satellite Pro P100 (Geforce Go 7600), recently I bought a DVI - D cable to link them together.

  Now the problem is that when I connected to 1400 x 900 LCD TV screen goes to a black screen several times (usually when there is a lot of activity or I'm resizing windows to the maximum to the minimum).

  Now, I would have thought it would be the LCD TV doesn't do not signal or refresh rate however I connected using a VGA cable and its fine - no problem just no matter how much I minimize my windows or put a lot of activity on the screen. To complicate matters even more, when I run the screens in "Dual screen" mode instead of "Clone" if I put one of them 1400 x 900 to 59hz in 16 bit it works fine...?

  Can someone help please that it made my head that I can't understand what the hell is the cause!

  I've included a list below all the different resolutions / screen modes I tried it and the result.

  Thanks for your time & help.

  Concerning

  Craig.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - constantly flashing black screen
  60 Hz - constantly flashing black screen
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 32-bit color) using 3 m DVI
  59Hz - screen flashes black only when resizing windows
  60 Hz - screen flashes black only when resizing windows
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - no option
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 16-bit colors) using 3 m DVI
  59Hz - works great
  60 Hz - very rarely flashes black when resizing.
  75 Hz - intermitantly flashes black when resizing.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 on Samsung 940MW Toshiba set to dual screen (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  Hello

  I hope that you have enabled user s manual supplied with your device. On page 148, you will find a very interesting picture on the supported display resolution.

  I have to be honest with you and say that I am no expert DVI because my LCD doesn't have this port, just HDMI but if I have understood you as soon as you have problem with a resolution of 1440 x 900 only. This resolution is not listed as supported, and I presume that it is not unusual to have a problem.

  Sorry, but I think that you should use maximum supported only resolution 1280 x 1024.

• Satellite Pro P100 - cannot boot from external USB DVD

  My internal DVD player on my Toshiba Satellite Pro P100 failed, and my windows is broken.
  So I bought an external DVD drive to boot from, so I can recover the system using the product recovery DVD.

  Now, he actually goes ahead and starts from the DVD. But once in the setup it gives me the message: "ERROR: file Setenv.ini D:\Setenv.ini or X:\Tools\Setenv.ini not found!

  So I went ahead and checked if the file was... it was... but it is on Drive E:\ (probably because it's a USB device I'm starting from)

  -J' did some research and found that I needed to run the command: X:\tools\recogui /FE: say the recovery my files were actually on drive E:-which has helped a little... until I got a new error where it was always looking for the *. TPA file on drive D: eventhough I have via recogui had specified otherwise.

  Now what do I do to understand everything is to the recoveryprocedure on drive E: and not D:, as he seems to think?

  As I am in the middle of a period of review, quick response would be GREATLY appreciated :)

  Bad new boyfriend!
  Boot from external DVD USB drive is NOT possible!

  You can start only from the inside, ODD, HARD, LAN disk and external USB FDD (floppy)

  Greetings

• Connect a Toshiba TDP - T8 (projector) to a Satellite Pro P100 PSPA4E

  Can someone advise have installed the NVidia driver but without success.

  Asked Toshiba Tech support no better.
  Advised to visit their help center projector (£1.50 / min) needless complete waste of guy money knew less than me.

  Purchased two items at the same time, but are completely incompatible or so it seems, what should I do.
  Toshiba seem to be incapable of any suitable option!

  Any one out there can help please.

  Hello

  As far as I know the Satellite Pro P100 support the
  -Port VGA (monitor)
  This 15 port pins you allows to connect an external video monitor to the computer

  -Port DVI (monitor), this is optional and not supported by all Satellite Pro P100
  This port allows you to connect an external video monitor to the computer via a DVIcable

  -S-video output port TV
  This s-video out port allows you to connect a TV to cable s-video computer vista 4 pins.
  This port returns the NTSC or PAL signal.

  I put t know what port/cable from the projector supports, but generally, it should be possible to connect this projector to the VGA or DVI port.

  Good bye

• Satellite Pro P100 - display 1440 x 900 upgraded to 1680 x 1050

  Hello

  I have a defective Panel in my Satellite Pro P100. Model No.: PSPAHE - 001001GR.
  Currently, it is a sign of Lp171wx2 with a resolution of 1440 x 900.

  I can change it for this Panel: LP171W02 with a resolution of 1680 x 1050?
  Will it recognize kind of Plug-and-Play? Better resolution and running as before. Or does not recommend or not even possible?

  Thank you very much in advance,
  Schwieger

  Hello

  I think he can.
  I know that the different models of Satellite P100 were equipped with two type of poster:
  17.1 inch, WXGA + (1, 440 x 900), color TFT display high brightness of amorphous silicon.
  17.1 inch WSXGA + (1 680 x 1 050), color TFT display high brightness of amorphous silicon.

  I m not very good if you could use the LP171W02, but the laptop would certainly deal a 17.1 inches, TFT WSXGA + (1, 680 x 1 050).
  You can also order a compatible part of a Toshiba ASP in your country.

• Satellite Pro P100 - Synaptics touchpad problem with Win 7

  Satellite Pro P100 with Synaptics Touchpad, was now running Vista, Win 7 64 bit.
  The original driver had an option "disable when the external pointing device connected.

  I installed a Synaptics Synaptics_v14_0_3_C_XP64_Vista64_Win7 driver - 64_Signed_default.exe that does not have this check box.

  It works fine except that sometimes the Microsoft Mouse becomes works all the seconds that she or the touchpad to fight everyone. I have to disable the touchpad.
  So the next time I turn. If I do so without a mouse, I can't use the touchpad until I plug the mouse, turn it back on, then disconnect the mouse.

  Thank you

  Hello

  Try to install the Synaptics drivers and Alps touchpad page pilot European Toshiba.
  Choose the touchpad Win 7 drivers out for a satellite L500 series.

  By the way; the touchpad can be enabled and disabled by using the FN + F9 button combination. It is not necessary to have all the options if FN + F9 works very well.

• Satellite Pro P100: I need to remove some software before installing Vista

  My Satellite Pro P100 needs the following software uninstalled before installing Vista: -.
  Norton Internet Security
  Bluetooth Stack for Windows by Toshiba
  ConfigFree

  Toshiba has plans to release a version of Vista the last two?

  Hello

  I put t know that Toshiba exactly, but all the tools and utilities will be available for download after the official launch of Vista.

  A friend of mine told me that it may happen that all software will not be created separately for the facility, but as a set of software. I put t know where he found this info, but let's see how it will work.

  By the way: pile of BT for Vista is available on the Toshiba BT page. Check it out under the http://aps.toshiba-tro.de/bluetooth/

  Good bye

• Need of new graphics card for my Satellite Pro P100

  Hello
  My Toshiba Satellite Pro P100 has no display screen or an external monitor, it has a separate Nvidia Geforce go 7600 graphics Card.
  Can any body tell me if I can get a replacement card?

  Thank you

  How do you know your laptop has a separate graphics card?
  Have you had success out of the mainborad?

  Sorry these issues but I m a bit confused. As far as I know graphics card is part of mainborad and cannot be replaced separately.
  http://195.182.196.33/KB0/FAQ7A01ZW0007R01.htm

• Official release of the drivers XP and Vista for Satellite Pro P100 - 465 PSPAEE

  When will it be available for XP and Vista for the PSPAEE drivers? Currently there are drivers for the PSPA4E, some of whom work, others do not, no operating system. Yes the laptop is preinstalled with the Vista Upgrade and pilots work, but two of the pilot applications are blocked by Defender (NDSTRay / ConfigFree and VolControl). I couldn't get no option to allow to these (not yet classified MS so they are locked) told me to disable Defender technical support!
  I tried a clean install of my own version of Vista business and had problems of drivers with that as well.

  I would like to run XP until Vista is, shall we say, more effective I would use drivers specifically for her, so time would be very useful.

  I would also like to know why there is a where a finger scanner could go under the 0 on the keypad, and a blocked stop lower PCMCIA port (PCI-E?) when any of these are available as an upgrade option? I missed these upgrade options or is it a case of recycled from another model, they exist? If the latter then it is quite cheap for a new machine :)

  Hello

  We have all the users here can suggest only it seems that Vista and XP drivers are already available for Satellite Pro P100 PSPA4E
  So in my opinion the next drivers for the next series should follow in the near future

  I don t see it differently as to wait

  Of course, you can test different drivers from different series as Sat P100.
  Many laptop models use the same devices and therefore different unique pilots could be compatible

• Activation of keypad on the Satellite Pro P100

  I just got my laptop new Satellite pro P100 and cannot find how to set the number pad (integrated) to be enabled at power on.
  I checked in the Setup, the Toshiba HW setup... nothing

  Does anyone have an idea?

  Thanking you in advance

  Please correct me if I'm wrong, but there is no sense for me to have 'num-lock' enabled at startup on all laptops.
  As you know, all the keys the keypad uses are shared with the regular alpha keys. In order to avoid interpretation of the wrong password (on a reduced keyboard set), the "Numlock at startup" function has not been implemented in most (all?) notebook BIOS.

  You can hold the key while you tap on the "blue pad", but that's all you can get without activate "num lock" with the +.

  If you have an attached external keyboard, very probably the num-lock on the extra cushion will be "on" by default. Otherwise, if you do a lot of the use of the numbers, you can get a num - pad usb to your laptop. There are quite expensive "toshiba-made" on e - bay ;)

  Concerning

  chain

• Satellite Pro P100: Need for questions to three strange questions

  Satellite Pro P100: Three strange things on an otherwise beautiful machine

  1 Ethernet limited to 100 Kbps (at this level it really should have been 1 GB)
  2. no micro internal (can't understand why they who excluded)
  3. most irritating batch - top N2 digital key has "where @ should be but the guys @ when you shift press on it." The ' has @ where "should be and type" when you shift press on it. If I was a touch typist and did not look at the keybourd while typing but I'm a Visual typist and I'm continually spoil it - and I'm used to it. If a techie works on my machine, he made his nut.

  Toshiba there perhaps the keys to spare for us?

  Hello

  (1) it is very strange because the satellite Pro P100 was equipped Gbit Lan card and you should be able to use it. I think there could be some bad LAN setting in Lan Card Properties. Check it! You can access it in the Device Manager-> ECS-> Lan card-> properties. It is then a new window and you will find the different tabs. Here check the Advanced tab

  (2) what to say, Toshiba seems different designs for laptop series with different hardware configurations. Your P100 was not equipped with the internal mic. This is why you must use an external mic.

  (3) sorry, buddy, but I do not agree with you.
  This isn't a hardware problem. You use the keyboard language settings simply false. Yes! It s a matter of adjustment.
  I assume that you use the English (United Kingdom) and non-English (United States).

  Check it out

• Satellite Pro P100 - replacing the HARD drive internal

  I have a Satellite Pro P100 with a concert of 60 internal HDD and would like to replace this with a 250 or 320 GB drive.

  Anyone can suggest a way to imagery of the current drive and copy this back to the new drive without having to re - install the operating system and other installed software?

  I have a couple of USB 2.0 external drives with sufficient capacity.

  Hello

  You first need to know if the more drive HARD 250 GB or 320 GB would be compatible and if the BIOS recognize this HARD drive without major worries!
  The problem is that not all HARD drive sizes are supported by the BIOS.
  Then all first check if the new HARD drive are supported!

  You ask how to get all the files on the new disk? I recommend good reinstall the OS from the recovery CD. It would be to reinstall the OS, drivers, tools, utilities.
  If you have other files such as mp3, etc it then backup to the external USB HDD.
  Then you could connect this HARD drive to the laptop and could transfer it on the internal HARD disk.

  Greetings

• Broke the screen on Satellite Pro P100 - 1 1/2 "vertical white line

  Hello
  I have a Satellite Pro P100 which is only 21 months old and have recently acquired a white strip to the bottom of my screen which is located near Center. I looked into the possible solutions for this and followed the instructions carefully to see if it was a software problem which he seems not to be. The only possible solution seems to be to get the screen replaced. I would like to know if there are many of you who have had this same problem because I'm disgusted that I need to get this replaced so early in his life.

  I don't even use my phone as a laptop (IE it transport etc.) it is simply sitting on my desk at home. I just checked my warranty and apparently it was submitted only for 12 months! Just my luck!

  If anyone has any suggestions on how to best to argue my case with Toshiba in get this replaced for free then the answers are welcome.

  See you soon,.
  Corrina

  > Only possible solution seems to be to get the screen replaced

  Either it's a display or the fault of the graphics card!
  You can try to connect the external monitor to test if the same would appear on the second monitor.
  If the question seems not on the external monitor then it s not a graphics card issue but possible display of the laptop problem.
  In this case, the authorized service provider should be able to provide more details and how to fix it.

  Good luck

• Satellite Pro P100-327 no visual don't screen the bios startup

  Hi guys,.

  I have a problem that I think has been there since I upgraded my Satellite Pro P100-327 XP to vista Business.
  At the start, I have more no Visual on the screen until I see the windows logo. Computer works fine otherwise.

  Now a year and a half later I want to load Windows 7 and I can't see the bios screen. F12, F2 or esc. do not help me even if the computer does not stall but I do not see on the screen. I have the latest version of the bios and the nvidia drivers as far as I know.

  The only thing that I did not understand everything is the 'value added package' I think it's the small "HW" program, I downloaded the latest version and clicked on load HW in the control panel. Windows has asked if I wanted to go forward and I saw nothing else after that.

  thaks a lot if anyone can help

  Brian

  Hello

  For me, this looks like a problem of monitor settings but I don't know m.
  You are using an external monitor or have you changed the monitoring (from simple to double mode) mode?

  In your case, I could connect an external monitor and see what happens. Have you noticed the same problem on external monitor?

  In the worst case, there is something wrong with the internal display, but this should be verified by a technician of the laptop.

• Vista 64 bit need drivers for Satellite Pro P100

  Hello

  I have a question about the drivers for the 64 bit version of Vista. I have a portable Satellite Pro P100 and search in the catalogue of drivers and find only an update of the BIOS for 64-bit systems.
  But where can I find the hardware drivers for the 64-bit versions?

  Concerning

  Mischa

  Toshiba doesn t offer drivers for Vista 64 bit and this model, so you must search on external websites for drivers.
  It is the only way to get the drivers:

  For example:

  [www.intel.com]
  [www.realtek.com]
  http://APS2.toshiba-tro.de/Bluetooth/
  http://APS2.toshiba-tro.de/WLAN/

  Good luck!