Two external monitors can be connected to the docking station?

Similar Questions

• sound on laptop lost when it is connected to the docking station

  laptop connected to the docking station and audio comes through the audio connection [headphones] on docking station.  No sound on computer

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  When you connect the laptop to the docking station, the default audio output device will automatically change to the docking station. Similarly, in the case of plug in the headphones on laptop. I suggest you to check if the audio device by default from computer speakers is properly defined. Follow these steps:

  a. click the Start button, select Control Panel, click hardware and soundand then click sound.

  b. click the read tab make sure that the correct default audio device is selected. (For most users, the default audio device is pregnant.)

  c. If your default device is not set to the right audio device, on the read tab, select the appropriate device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, click OK.

  d. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.

  If the sound settings are set correctly and that your speakers are already set as default device, go to "Check if an audio driver is installed" now.

  e. Select the audio device you want as audio device by default, and then click set as default.

  f. click OK to save your settings.

  For your reference, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• T410 does not connect to the docking station

  I have a Lenovo T410 and a docking station 4338. When I tried to join the computer to the docking station last night, he would not go. I don't see any obstruction or something wrong with the plug on each unit; the computer can't accumulate up as before.

  I have another station host I can try, which should help to determine which device is the problem, but I won't have access to him until next week.

  Have someone has encountered a problem like this? Any suggestions to correct?

  I compared the two docking stations and identified the problem. There are two plastic hooks built into the base, one to the right of the connector, one left and below. In a station works correctly these hooks are discarded because the computer is inserted, then spring back, now in place.

  On my post of malfunction the hooks were stuck, prevent the computer from insertion.

  I was able to fix the problem by pushing hooks with my finger, which take them off. If they stick once again I can try a Lube graphite.

• Venue 11 keyboard connected to the docking station

  The place of meetings 11 keyboards can communicate with the Tablet when it is in the docking station?

  With the way the place of sessions 11 is in the docking station, it would be quite difficult to have a connected keyboard because he wouldn't level with your office.  If you use the docking station, shouldn't you already have an existing configuration of the Office you can take the keyboard and mouse of?

• W540 Freeze on boot screen, when it is connected to the docking station

  Occurred when docked to a docking (so far)

  OS - Windows 7 Pro 64

  BIOS 2.24

  
  

• Can I use two external monitors with Satellite P105?

  I wonder if it is possible to connect two external monitors P105-S9722 model using the DVI and VGA ports at the same time?

  Hello cozdas

  It is very interesting question but unfortunately I don't l t figured out how you use two monitors. Can you please be a little more specific?

  I am also interested in how you are connected the two monitors on your laptop?

• Tecra A9 - connection of two external monitors using Express Port Replicator

  Hello

  I have a Tecra A9 and Express Port Replicator.
  I'm trying to connect 2 external displays, one connected to the output of the laptop and the other connected to the docking station (notebook lid closed, do not use the laptop screen).

  I can't get to work, anyone know if this is possible?

  Hello

  I think you want to connect a VGA monitor and the other to DVI port.
  Is this good?

  Well, I found this doc:
  http://APS2.toshiba-tro.de/KB0/TSB7B0201000CR01.htm

  Depends on used Tecra A9, if you can get a picture on the DVI port on the Express Port Replicator (PA3508E-1PRP) or not.
  The DVI port on the on the Port Replicator Port Express is supported only on computers with graphics card ATI or nVidia.
  If you have a DVI INTEL graphics card port on the on the Express Port Replicator only is NOT supported.

• New X 220 supported two external monitors with the mini dock plus?

  Hello

  I need to buy a new laptop of Lenovo in emergency.

  But we must ensure that it supports dual display on two external monitors. (VGA)

  My question is:

  (1) we plan to buy with the mini dock more, she has two HDMI port.

  can it support two external monitors for Intel HD Graphics 3000?

  (we will close the covers when to use two external monitors)

  (2) can I use DVI to convert converter VGA to VGA to support two external monitors

  (3) what is the difference in weight to 220 X SATA HDD and SSD HDD?

  Please help to emergency!

  Rgds,
  Sun

  Hello

  Yes, it works.

  He must need a converter VGA (F) display port.

  Thank you.

  See you soon
  Sun

• Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

  Hi all

  As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

  I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

  Any assistance received very warmly.

  Thank you!

  Hello

  Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

  Maybe's external screen connected to the docking station?

• Satellite P100: Can I connect two external monitor to the VGA & DVI port at the same time?

  Satellite P100 comes with two port external monitor. One VGA and one DVI. Can you have two external monitor works at the same time? Can you have two external monitor as well as your internal screen working at the same time (for a total of 3 screen at the same time?

  Here's what I confirm:

  Internal display + display DVI connector
  OR
  Internal display + screen VGA connector

  Is it possible to have:

  Display connector DVI + VGA connector display?

  OR

  Display connector DVI + VGA connector screen + internal display?

  As far as I know, this is not possible and you can use a DVI or VGA port.
  Output signal can be used only a single port for external monitor.

• Can I connect Macbook Air to two external monitors?

  I have the MacBook Air (13 inch, early 2015), one of the monitors is already connected via DVI/Thunderbolt and given the MacBook Air only have port a thunderbolt and two USB 3.0 ports, is possible that I connect the other monitor from other ports.

  OS X El Capitan: connect multiple monitors to your Mac

  Can I connect two external monitors to my macbook air

• Re: Can I connect two external monitors to my Tecra M7?

  I have a Tecra M7, I would put up two external monitors. I install one on the VGA port and one DVI port and I try to extend the monitor overall, but the only option I have is to an external monitor and the screen of the tablet itself.

  Anyone have any ideas on how to solve this problem?

  As far as I know that something like this is not possible. Graphics card can send the signal on a port only, VGA or DVI.
  If you want to use two external monitors, you need an external device, such as Toshiba Dynadock (docking station USB with VGA or DVI port). Using the docking station, you will have three monitors shown in display properties. We will be connected directly to the laptop and the second on this docking station.

• Tecra Z50 - need to connect two external monitors

  I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors.

  Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)?

  * Hi-speed III Port Replicator is not an option, because it is not available in my country (Croatia).

  Hello

  I don t think you will be able to connect two external monitors to this laptop using HDMI and RGB port at the same time because of different types of signals.

  The RGB/VGA port supports analog signal.

  The HDMI port provides the digital video output and when the external monitor is connected to the HDMI port the device is set to HDMI.

  > * Hi-speed III port replicator is not an option because it is not available in my country (Croatia).
  What of the Dynadock? Its an external device connected to the s for computer laptop USB port.
  It supports own graphic unit and you can connect to another external monitor such Dynadock 2nd.

• The use of two external monitors on XPS L702X

  Hello

  I have laptop Dell XPS L702X and you want to connect two monitors external to it when I'm at my desk.  The laptop has a HDMI and display Port.  Could someone tell me 1) if it is possible to connect two external monitors to my laptop.  I do not know if this is supported.  (2) if it is supported what would be the best way to do it.  Here are some of my thoughts, but I don't know if they will work

  (1) port HDMI to a monitor and Display Port to the other monitor.  It will even work?  The monitors will look the same?

  (2) HDMI to DVI Splitter.  This seems reasonable but it will reflect the entire screen or I will be able to extend the desktop.  I don't want to see the same thing on both monitors.  Will also be this gradient.  I was kind of hoping it Full HD that I don't need absolutely.

  http://www.Amazon.com/HDMI-dual-premium-splitter-cable/DP/B000FMPR0Q

  (3) using the HDMI then gettting and external USB video card.  I'd rather not but if I have to I guess I do.

  Thanks for your thoughts and please add more options than what I have just listed.   I want to find the optimal solution.

  Tom

  Well I thought about it.  Option #1 work.  You can connect two monitors to the Dell XPS L702X.  In fact, I have three.

  (1) the computer screen

  (2) monitor 1 using the HDMI output on laptop to the HDMI input on the monitor

  (3) 2 of Montor output using Mini Display Port to VGA input on screen (using a Mini Display Port to VGA cable) I see these cables everywhere on the internet, but they all say to use with Mac.  I call the Dell technical support and they managed to send me the right cable for use with Dell.  Others may work, however, I'm not sure.  It is unfortunate that Dell doesn't have a Mini Display Port to DVI - D.  I want conversion back VGA is going back in time.  The display seems perfect for a regular job but don't know about the movies or games.

  Complaints to Dell if someone he cares

  (1) I called your sales for the purchase of monitors line and they told me wrong information on how to connect monitors and those to buy.  First, they said I had to buy a usb docking station.  The station costs around $100 and it would very definitely degrade the display.  I have the hdmi and display port of course so I want to use them.  When I pressed on this they then tried to get to buy me and switch hdmi for over $ 150.  I personally do not think it will work because I want to extend my screen do not have the same result on both.  Maybe it would work well, they seem not confident even though I was told it would work.  Also, I didn't drop $150 extra.  So I don't end up buy monitors dell of Dell because of the wrong information.  Oh they also told me I wouldn't be able to have 3 views using my video card and that I would need an external. (Evil)  Overall that's mad and I lost a lot of time trying to do a simple task of connecting monitors.

  (2) I finally decided to call Dell technical support.  I should have done this earlier, but every time I call the technical support they want me to pay.  Fortunately I get assistance for a new computer.  I'm starting to feel better Dell again.  Technical support told me that I could connect two monitors using HDMI and Display Port.   They me even a cable for the display port.  OK, I'm getting happier.  However, technical support also told me that I couldn't use 3 screens and that I would need an external video card.  They tried to repel the horribly rated usb docking station that they sell.  In all of the right specifications mine but reviews everyone has problems.  Anyway they Support went above and beyond (and I was not screaming or complain to them) that they actually had a technician out the cable.  Now, it is an exaggeration, but was really nice, because I was not happy with Dell for the moment.  I hooked the two monitors and extended my screen and to my surprise, all three screens worked.  Yahoo!  So happy.

  It was a frustrating race with bad information throughout, but ultimately, I'm happy.  I hope that you don't have to go through my frustration and make just the satisfaction of having 3 screens.

• The two external monitors show the same screen

  original title: using 2 external monitors on a laptop using Dynadock U10 problems

  Hi guys,.

  I try to use two external monitors using my a Dynadock U10..., I bought because it says you can use two external monitors with it!

  I installed the drivers for Displaylink etc.

  I plugged both monitors to the Dynadock (one via the VGA input) and one through DVI. When I have my laptop open it using cell phone as main screen and extends the office to both monitors, but both monitors have the same screen. If I identify screens, the laptop screen is 1 'and the monitors are the two 3'.

  If I close the laptop (I put the settings to not do anything if the lid is closed) and select my monitor as the main screen, they still both have the same image and the settins wont let me go to another screen. If I identify the screens, the two screens are developed under the number "1".

  I use Windows Vista. My laptop graphics card is "ATI Radeon 3100 Graphics"

  Any help would be appreciated!

  See you soon,.

  Stu

  Your video card is not serious with this home solution 'USB '.

  Toshiba is your point of contact.

  However - to answer your question - as much as I know you cannot do what you are trying to do.  You can use both outputs monitor, but the results you see are what you would expect.