Two leased lines

Similar Questions

• How to use Airport Extreme with ethernet leased line

  Hello friends,

  I was wondering if Airport Extreme is a true router, can I connect gout ethernet of my leased line directly in its WAN port, rather than put the provided ISP router between the two? I have lived many positions and all seem to suggest the connection of a cable/dsl modem to the WAN port on the extreme. Not found any information where it shows the ethernet line rented directly linking in the Giga WAN port, without any 2nd device in the meantime.

  If it's possible, then I guess also what public IP provided PSI can be put into the WAN of AE interface. Can someone develop more on it and detail the steps of configuration? Given that EI has basic firewall NAT, I think it's doable, but can someone confirm please.

  Thank you very much.

  Temporarily, if you connect your computer directly to the Ethernet line, can you get a good connection Internet in this way?

  If so, then AIrPort Extreme could function as a router for you, but you are also likely to face a Double NAT error on the network. How well... or, even if... This might work cannot be known until try you it.

  If the computer cannot connect, then what is required of your supplier for the computer to connect and get Internet access?

• RV042 leased line

  I have client, in his site have only two servers and 21 user, the wan connection is leased line but it have the modem, can I use the RV042 router?

  The leased line is presented as a serial port?  If so, no, as the RV042 only WAN Ethernet ports.

  You will probably need to look at something as a Cisco 1941 with a card serial HWIC-1 t.

• My MBP boot with two horizontal lines at the start

  Hello

  I have a Macbook Pro (15 "mid 2015).

  2.5 GHz Intel Core i7

  OS X El Capitan

  (1) my MBP boot with two horizontal lines on a black screen after the apple logo.

  (2) sometimes the screen suddenly became all glitch on the dry mouse 5-7 (2 - 3 times a day) the cursor moves and CPU rises from 4% to 13%

  

  What I did, reset the SMC, check mac by TechTool 8 - is shows OK.

  Please help, what happens? Someone at - it experience of something similar?

  Thanks for any help,

  Ivan

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  Ciao.

• Two vertical lines on my LCD screen

  Please, help me...

  Two vertical lines about 2 inches, width is one black and one white.

  They appear on my lcd screen in the middle of the left since the start. Always in the same position.

  Later, when the desktop appears, we the black remains black and a white becames an occasional color (or a combination of several mobile colors).

  I tried to use an external monitor, and I didn't have the problem.

  I tried with 'doctor test' PC hardware, but all the tests have been adopted.

  I would understand if the problem is the video driver, the LCD, the joint between the GPU and the motherboard, or the lcd. If the GPU is the problem, can I replace it without changing the motherboard or not?

  My PC is Thinkpad R60 9461-DXG and he is 2 years old.

  My BIOS version is 7CETD2WW (2.22)

  My OS is Windows XP pro SP3.

  My GPU is ATI Radeon X 1400

  My version of the video driver is 8.442.3.0 03/01/2008

  You can try replacing the cable of the screen first, then if that doesn't work the LCD.

  The manual on how to do these replacement is here.

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-64200.html

• BlackBerry Smartphones how can I move "Mémo" on applications to position on the two first lines of the homepage

  How can I move a Memo on the first two lines of the home screen applications?  Can you please provide information or a link to the handling and displacement than the positrons of type memo buttons clickable to reposition on the screen.  Thank you

  So when you are in the menu mode, highlight the memo and press the "menu". It will give you an option to move it. To move it to the home screen, you have to move to one of the two first lines. Just highlight where you want to move and click down, or press the Menu button again to make the move.

• Two vertical lines Bug?

  When I open this image, note the two vertical lines. What is happening with this?

  

  I would put the image to imgur.com to download, but when I do myself, the lines are not there.

  TromboneAl wrote:

  When I open this image, note the two vertical lines. What is happening with this?

  

  I would put the image to imgur.com to download, but when I do myself, the lines are not there.

  Go to the view menu and check if the 'Guides' are unchecked.

• Corner of mitre of two different line thicknesses

  Can someone advise please how to clean a corner with two different line thicknesses? When I Zoom lines mitre not as you wish, they both just to finish. The lines are a 10 PT and pt 2, drawn at the intersection at 135 degrees.

  Thank you very much

  Because they are not connected and have different stroke widths you can not get an angle.

  Convert the path traced thick contours (object > path > Outline Stroke) and adjust the end.

• The CC icon on my desktop has a blue disc with two vertical lines in it. When I open the Panel, it is completely empty?

  The CC icon on my desktop has a blue disc with two vertical lines in it. When I open the Panel, it is completely empty? How can I access the apps?

  The solution seems simpler than city above: reinstall the creative Cloud application. When he finally set in the Finder (Mac) you ' he's opinion - down under - that "synchronize file is paused. Click on the small triangle on the right and the problem is solved - or it was for me.

  Concerning

• Lightroom 6 develop Mode.  Screen loupe and compare view after screen show blue background with two diagonal lines of tbrl top low right another top right at the intersection of criss left in the Center.  If I move to another photo, the program stops

  Lightroom 6 develop Mode.  Screen loupe and compare view after show blue background wallpaper with two diagonal lines left and top right side of the other top right at the crossroads criss left in the Center.  If I move to another photo, the program no longer works and ends by asking me to close the program. Help?

  Go to your Lightroom preferences, performance tab, uncheck the option of the graphics processor.

• How to remove duplicates in two separate lines in SQL?

  Hello
  
  I need to identify the data in double with two separate lines. See my below data structure.
  INDEX OF NAMES NAME_1 START_DATE END_DATE FLAG VALUE
  B ON 275 SE 13/12/2005-31/12/2010 1
  SELF 1 375
  SELF 1 475
  ON 275 SE 2 B 13/12/2005-31/12/2010
  SELF 2 375
  SELF 2 475
  ON SE 175 13/12/2006 AND 31/12/2010 B 3
  SELF 3 375
  SE ON 3 475
  
  This is my sample data. Here, the data is mirrored with different index columns. INDEX 1 and 2 contains the same combination group. I so need to identify one of the combination double (i.e. INDEX 1 or 2). Anyone can come up with the exact solution?
  
  Thank you

  I thought it had to do with the order of the INDEX field. The query checks only the value of the previous INDEX value.

  I think I found what the problem was.

  Try this:

  with test_table as
  (select 'SUR' NAME, 'SE' NAME_1, '275' VALUE, to_date('13/12/2005','DD/MM/YYYY') START_DATE, to_date('31/12/2010','DD/MM/YYYY') END_DATE, 'B' FLAG, 1 IND from dual union all
  select 'SUR', 'SE', '375', null, null, 'A', 1 from dual union all
  select 'SUR', 'SE', '475', null, null, 'A', 1 from dual union all
  select 'SUR', 'SE', '275', to_date('13/12/2005','DD/MM/YYYY') ,to_date('31/12/2010','DD/MM/YYYY') ,'B', 2 from dual union all
  select 'SUR', 'SE', '375', null, null, 'A', 2 from dual union all
  select 'SUR', 'SE', '475', null, null, 'A', 2 from dual union all
  select 'SUR', 'SE', '175', to_date('13/12/2006','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 3 from dual union all
  select 'SUR', 'SE', '375', null, null, 'A', 3 from dual union all
  select 'SUR', 'SE', '475', null, null, 'A', 3 from dual union all
  select 'SUR', 'SE', 'IPT', to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 100 from dual union all
  select 'SUR', 'SE', '375',null, null, 'A', 100 from dual union all
  select 'SUR', 'SE', 'AO', null, null, 'A', 100 from dual union all
  select 'SUR', 'SE', 'IPT', to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 218 from dual union all
  select 'SUR', 'SE', '375' ,null, null,'A' ,218 from dual union all
  select 'SUR', 'SE', 'AM' ,null, null,'A' ,218 from dual union all
  select 'SUR', 'SE', 'IPT' , to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2008','DD/MM/YYYY'), 'B', 334 from dual union all
  select 'SUR', 'SE', '375' ,null, null,'A', 334 from dual union all
  select 'SUR', 'SE', 'AP',null, null, 'A', 334 from dual union all
  select 'SUR', 'SE', 'IPT' , to_date('01/01/2009','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 335 from dual union all
  select 'SUR', 'SE', '375' ,null, null,'A', 335 from dual union all
  select 'SUR', 'SE', 'AP',null, null, 'A', 335 from dual union all
  select 'SUR', 'SE', 'IPT' , to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 336 from dual union all
  select 'SUR', 'SE', '375' ,null, null,'A', 336 from dual union all
  select 'SUR', 'SE', 'AP',null, null, 'A', 336 from dual)
  SELECT name,
         name_1,
         value,
         start_date,
         end_date,
         flag,
         ind,
         MIN(diff_flag) over(PARTITION BY NAME, NAME_1, IND) min_flag
    FROM (SELECT t3.*,
                 CASE
                   WHEN lag(VALUE, lag_flag)OVER(ORDER BY IND, start_date, VALUE) != VALUE AND flag = 'A' THEN
                    1
                   WHEN (lag(value, lag_flag)OVER(ORDER BY IND, start_date, VALUE) != value
                      OR lag(start_date, lag_flag) OVER(ORDER BY IND, start_date, VALUE) != start_date
                      OR lag(end_date, lag_flag) OVER(ORDER BY IND, start_date, VALUE) != end_date)
                      AND flag = 'B' THEN
                    1
                   WHEN lag_flag = 0 THEN
                    1
                   ELSE
                    2
                   END diff_flag
            FROM (SELECT t2.*,
                         first_value(lag_count_flag) OVER(PARTITION BY NAME, NAME_1, IND
                                                              ORDER BY NAME, NAME_1, start_date) lag_flag
                    FROM (SELECT t1.*,
                                 CASE
                                   WHEN FLAG = 'B' THEN
                                    lag(COUNT, 1, 0)
                                    OVER(ORDER BY IND, start_date, VALUE)
                                 END lag_count_flag
                            FROM (SELECT t.*,
                                         COUNT(*) over(PARTITION BY NAME, NAME_1, IND) COUNT,
                                         row_number() over(PARTITION BY NAME, NAME_1, VALUE,
                                                                        START_DATE, END_DATE, FLAG
                                                               ORDER BY IND) row_number
                                    FROM test_table t) t1) t2) t3) t4
   ORDER BY ind,
            start_date,
            VALUE;
  

  Published by: Manuel Vidigal on Abr 13, 2009 18:18

• Satellite Pro A40 - two vertical line connecting TV

  My problem with the Toshiba A40 Pro to connect to the TV.

  Euro-VGA cable (SCART). When you connect a desktop with two line vertical image.

  Pixels in PowerStrip does not work.

  I would add that the graphics card is Intel 82852/82855 GM / GME.

  Hello

  Where the lines are appearing; internal laptop or TV on the screen?

  Have you tried an update of the display driver?
  How to test a new cables...?

• Angle between two independent lines of the universal coordinate reference system

  I have 4 different routed as on the attachment. The points of the black lines are from edge detection.  Two lines (black) intersect at a point (red). Green is the bisector. In all cases the angle between lines should be 45 degrees. .. At the present time in some cases, I get to + 45 degrees, + 135, -135, -45 degrees. Is there a way to get the angle between two lines independent of the coordinate system?
  Or ideas?

  

  Try this:

  

• HP Officejet Pro 8600 Plus: Scanner/Fax, printing of two black lines on documents

  When you use the document for scan, copy, fax feeder, etc. the document always ends with two vertical black lines in the middle of the page.  I read a few other posts similar to this and tried all the advice, and nothing seems to have worked.  So far I've tried: cleaning the machine reset, turn it off for a period of time and again, disconnect it from the power supply for five minutes and by him plugging plug (which were the advice given in other posts).  Thanks in advance!

  Hi @JHurkett.

  Welcome to the Forums of HP's Support. I understand that you found lines in the scans and faxes of the ADF. I would like to help.

  If please examine this message and try the steps that you have not already done so. HP Officejet Pro 8600 e-all-in-one and Photosmart 7520 e - all-in - One Printer Series - band vertical, lines, or streaks in the Copies, faxes, or scans

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• two black lines on HP Officejet J5780 all-in-one

  When you print from the ADF of my officejet J5780, two parallel straight lines appear on the right side of the top of the page toward the bottom of the page.  Anyone know of a solution? My research, such as it was, came the voids.

  Since you get only that when you use the ADF and not when using the scanner glass, it tells me it is specific to the region I was explaining.  Please take a closer look, it is possible that something is under glass in this small strip.  Even a small speck of dust, in the analysis of this region will create an output of a line to the bottom of the full page.  If you hold the printed page with the line where the ADF would feed through the scanner glass, you should see where is the problem area.

  Thank you