Two monitors - keep extended mode when the lid of the laptop

Similar Questions

• Why should keep the lid of the laptop closed when the laptop is not in use?

  Why should keep the lid of the laptop closed when the laptop is not in use?

  For energy conservation, to avoid dust and spills and damage the display.

• Two monitors stacked vertical Mode.

  Is - this Windows 7 64-bit supported two monitors in vertical mode? Piled one above the other. I use an Asus EN9800GT with Windows 7 Home Premium video card. I don't see the option in the Nvidia Control Panel and display Windows. I have a small desktop and can't put side by side. Now scroll right the lower screen to get to the top screen. The two monitors are Samsung Syncmaster 2253BW and 731B.

  Monday, August 16, 2010, 21:48:52 + 0000, CRB64 wrote:

  Is - this Windows 7 64-bit supported two monitors in vertical mode? Piled one above the other.

  Yes, you can position the monitors in any way you want. On the screen
  the screen, simply drag images from monitors at the job you
  physically have them in.

  Ken Blake

• can you use a deskjet 970cse in black only mode when the color cartridge dries up

  can you use a deskjet 970cse in black only mode when the color cartridge dries up? Thank you, Jerry

  banhien information is very accurate. I would just add a bit of it. Because this printer uses a tricolor cartridge and a black, it should be one of the printers that will print with just the black cartridge installed. It is called print in backup mode. I should happen automatically when you remove the color cartridge and try printing. A message will arrive on the printer or the computer and ask you if you want to print in backup mode. Say yes, and it should let you print. Hope that helps.

• is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Hi Kenelms,

  You can follow this link & check if it helps.

  HOW to: Set up hardware profiles for laptop computers in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• There are two screens (split screen) showing when the computer is turned on.

  There are two screens (split screen) showing when the computer is turned on. How can I delete one side to return to a view?

  Hi Ikthomas1,

  When did you start in this topic? Were there recent changes to the computer like installing new hardware, software or updates? If it is a recent issue, follow the steps in this document to perform a System Restore. This will restore your comuter up to a point located before the show.

  If you have antivirus software installed, run a scan of filling. You can also use Microsoft Security Essentials to scan your computer.

• Satellite Pro L650 - 1 L 4: battery will be discharged when the laptop is disconnected

  Hello together,

  I have a problem with my 5 month old laptop Satellite Pro L650 1 L 4.

  When the laptop is unplugged it will pay the battery. About 44% within 24 hours.

  Of course, options like BIOS "Wake we Lan ' and something like which are completely disabled.
  And of course the laptop is turned off completely and not the Sleep Mode.

  Any ideas?

  Kind regards

  Stephan

  Hello

  Please check if the wake-up on LAN is also disabled in the properties of LAN card (Device Manager-> LAN card-> properties-> Advanced tab).
  I also recommend checking the WLan card as well.
  Please also check if attached USB devices don't lose the power of the battery.

  But also a malfunction of the accumulator may be possible... so it has to be checked also...

• Want x 360 15-u111dx: Touchpad turns off when the laptop is on the side

  Hello

  I'm the kind of person who tends to use my laptop on the side while lying on my side. Have a 2-in-1 laptop makes things difficult when I stay in portable mode, but I put the laptop on the side. He starts from the principle I want to use it as a Tablet while it is still in laptop mode. The screen starts automatic rotation and the touchpad deactivates accordingly.

  Fortunately, I know how to disable the auto-rotation when this happens, but I don't know how to re-enable the touchpad when the laptop is on the side. Help!

  Hi there @lisanvo,

  I looked into the different ways that you can use your laptop to see if the function to the HP ENVY x 360 on its side in laptop Mode was possible. I found a paper called HP ENVY x 360 Convertible PC - Maintenance and Service of Guide.

  If you look under external component identification on page 7, , you will see that it gives you three modes that allows this particular model.

  I also found that the tilt sensors and the dock will not to allow you to use that phone in particular in the service that you want to because it's a model that allows you to have capabilities of the tablet.

  I want to thank you for visiting the Forums from HP Support.

  Have a great day!

• Magic of the network hit all the computers off line when the laptop wireless on signs

  I have Network Magic V. 5.1.9055.0, a G from Linksys WRT110 wireless router. Online at any time may be all or part of the next list computers/gamers, computer hand Win XP sp3 is connected to the router, Samsung clp300 printer lazer connected to the main computer as a server, Vista sp2 office connected to the Wii, PS3 wireless wireless router and laptop Vista sp2 wireless. Whenever the laptop wireless comes online, it will stop magic network until the wireless is fully initialized and online, it strikes all onlines offline until there is a full boot of the wireless.

  Very frustrating since we went all the cisco and spilled a belkin router that worked perfectly with the above configuration. (unfortunately I gave the belkin far and no longer have access to it or I would have released this new linksys and would be happy to once again) I don't understand why cisco units cannot work together in harmony?  In any case, I can't find any info on the help of linksys or the magical sites network which brings me to this forum. Need help, please notify...

  I removed NM v5.1.9055 three computers and re-installed to v 5.5.9118. inserted my key and re started to each of them. When the laptop wireless started it off the other two for about 3 minutes until the phone was fully charged while we were back on the line. The poster always online in the map view, the internet router is and the laptop (Vista) shows online, but the report to other computers (1 XP and 1 Vista) shows red and offline. Always frustrating because it's all working without error until I installed the linksys cisco router then the trouble started... still need help...

• The screen goes black when the laptop is disconnected

  The LCD on my DV6 becomes black when the laptop is disconnected the power supply cord.

  Help, please!

  Hi, have you checked the brightness on the energy savings?

• The problem that I have for a week, it is that my screen is fine when the laptop is plugged in but fades when it is not plugged in.

  I have a Samsung NC10 that I bought in 2008 and the problem I've had for a week, it is that my screen is fine when the laptop is plugged in but fades when not plugged in - it ' s like going to a brightly lit room, in a room where the lights are dimmed... What can I do to remedy this? My battery runs down? Can I us my laptop plugged it my battery die? I must admit that I left basically still my laptop plugged...

  Check the settings of the display under battery power and adjust accordingly - How to adjust the brightness of the screen under Windows XP.

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• CC only opens when the laptop not linked to internet

  When the laptop is connected to the internet Creative Cloud opens and allows me to launch Lightroom. However when the laptop is not related to internet, all I get is error screen that says I am offline and needs to connect to the internet again. It is not related to the day 30 'Refresh' which is required to check that my monthly payment has been processed. I use the Windows 8.1 operating system and CC build 2.2.129. The problem when the McAfee virus protection is active or disabled. What I've noticed is that sometimes when I start to creative cloud the "trial of the Star' button appears but when I click on the program solves the problem when I open Lightroom."

  I spent hours on the phone and via the Adobe Support chat link and they can not get this to work. I even they gave remote access on my device. I've seen other posts in the same direction, and despite the suggested fixes, the problem persists. It becomes very frustrating because I'm doing wildlife photography and it's a challenge when in the African Bush with no connectivity.

  When not connected to the internet, please try running the installation location apps.

  For more information, please see a launch Adobe Creative Cloud apps

  Hope this will help you.

  Kind regards

  Hervé Khare

• Win runing XP two monitors in DualView mode and not remembering the last size and location of the records? How to solve this problem?

  I am running WinXP SP3 with two monitors running in DualView Mode and everything worked as expected until I installed the latest NViDIA drivers.

  After the update of the pilot, all windows and folders open centered on the main display and all pop-up windows from any open window, centered on the secondary display.

  Any changes to the size and the location of the windows and/or files is not saved.

  I searched the Internet for solutions and found nothing.  I tried Microsoft FixIt to the more obvious (said) problem similar to mine and it did not fix the problem.

  I finish the registery fix suggested and it fixed the problem.

  Any suggestions?

  Please notify.

  Roger P. Hendrix

  Hi Roger,

  1. have you tried to uninstall the Nvidia drivers (if you do not want to make install)?

  Follow these steps and check if the problem persists.

  Step 1:

  Uninstall the Nvidia drivers and check if that helps.

  a. Click Start, click Run and then type devmgmt.msc.
  b. right click on my computer and click on manage, and then click Device Manager.
  c. right click on my computer, click Properties and click the Hardware tab, then click Device Manager.
  d. click right Nvidia drivers and uninstall it.

  Step 2:

  Do e restor systemto the point that your computer was working normally and check if that helps.

• Toshiba DVD Player & Aero (with external monitor in Extended Mode)

  I didn't know a lot about the forum on this subject, but if you Google 'Can not customize Aero' or another similar question you will see that it is a fumble from Toshiba/Vista to overcome, in some cases, as described below.

  * {color: #0000ff} SCENARIO *.
  * {color} * 1 Qosmio G50 - 10H.
  2 I had configured a DynaDock in the system and attached to an external monitor to try in "Extended" mode
  3 I disconnected everything and then tried to play a DVD by Toshiba Media Player.
  4 at this point, I had not looked at combinations of colors Windows or themes.
  5 Toshiba DVD Player wouldn't indicating that the Windows Aero scheme should be used.
  6 when I implemented the function customize, there is no option in the section 'Color & appearance' Aero.

  * {color: #0000ff} SOLUTION *.
  * {color} * after an unreasonable amount of googling and a multitude of suggestions and solutions, WE work that I present below.

  The eccentric solution was to go into settings/customize the display and click on the external monitor (which is gray). Remembering that this monitor is not currently attached, I unchecked "extend the desktop to this monitor". Immediately the Windows Aero was offered in 'color and appearance '. After selecting this regime, with its defaults, the Toshiba DVD movie player worked.

  * {color: #0000ff} GOTCHA EXTRA *.
  * {color} * when I reconnect the Dynadock and you want to use the external monitor in dual mode (extended), I'll have it becomes 'Extended '. What a pain.

  In any case, I hope this will help some other poor bastard who gets into this difficulty.

  Thanks for this interesting announcement.