Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

Newly build Production environment (don't use it yet)

OS: Linux redhat 64-bit 2.6.18

Cluster version: 11.2.0.4

This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

Alerts cluster log shows below:

2014-03-25 03:50:01.429:

[crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

2014-03-25 03:50:01.433:

[crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

2014-03-25 03:50:02.123:

[ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

2014-03-25 03:50:03.407:

[crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

2014-03-25 03:50:03.411:

[crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

The NEWSPAPER of the ASM alerts:

Wed Mar 25 03:21:49 2014

WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

Wed Mar 25 03:21:49 2014

NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

NOTE: check PST: grp = 1

GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

ERROR: read no quorum within Group: required 2 found 1 records

NOTE: audit PST grp 1 fact.

NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

ERROR: read no quorum within Group: required 2 found 1 records

Wed Mar 25 03:21:49 2014

NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

2 node rac cluster is normal.  We were able to stop the crs without force.

What should I look at to understand what is happening here?

Thanks to adavnace.

WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

No default value is 1 M

Tags: Database

Similar Questions

  • Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

    Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

    Hello

    I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

    Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

    See how it works for you:

    If you see a message like this:

    Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

    It is in the case Log:

    Event type: Information
    Event source: Application Popup
    Event category: no
    Event ID: 26
    Description:

    Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

    Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

    You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

    If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

    You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

    The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

    Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

    You also will be able to properly run a browser on the system afflicted to go on Internet download one.

    There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

    You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

    If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

    When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

    Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

    If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

    TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

    If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

    Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

    I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

    You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

    c:\Windows\System32

    Here is the link to my SkyDrive and you can get the file you need here:

    https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

    When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

    When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

    You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

    You then put the downloaded files in the correct folders on your system.

    That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  • This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

    This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

    The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

    Hi Kathy,

    1 have you made changes to your computer recently?

    2. When you get this error message?

    The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

    I suggest you to follow the steps and check if it helps.

    Method 1: Uninstall and reinstall Windows Desktop Search

    The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

    To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

    Step 1: Remove Windows Desktop Search from the boot sequence

    To do this, follow the steps below:

    a. click on the start menu, click Run.

    (b) in the Open box, type msconfig and press ENTER.

    c. in the System Configuration Utility dialog box, click the Startup tab.

    d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

    e. restart your computer.

    Step 2: Uninstall Windows Desktop Search applications

    To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

    a. click the start menu and select Control Panel utility.

    b. double-click the icon Add / Remove programs.

    c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

    d. press the button Delete.

    e. restart your computer.

    Method 2: I suggest do you an online scan and check.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • Satellite U300-13U - iTunes has detected a problem with the audio configuration

    Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

    I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

    Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

    Thank you so much.

    Hello

    I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
    -What operating system do you use?
    -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
    -Do you have the yellow exclamation marks in Device Manager?

    OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
    See the Web from Toshiba site for an update and see what happens. Then validate your result:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Welcome them

  • I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

    I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

    Hi gullo56,

    Welcome to Microsoft Answers Community Forums.

    To help you better I would ask,

    a. If it functioned very well under Windows 7 before?

    ·         I suggest you to disable your firewall security software and check if you are able to play the game.

    From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

    1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

    For information about how to run a program in an earlier version of Windows, visit the link below,

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    2. you can also try to reduce the hardware acceleration and check if it solves your problem,

    1. Click Start-> Control Panel-> appearance and personalization.

    2. under customization, click on adjust the screen resolution.

    3. in the display settings dialog box, click the Advanced Settings button.

    4. in the monitor Properties dialog box, click the Troubleshooting tab.

    5. click on the change settings button.

    6. in the Security dialog box, click on continue.

    7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

    8. click on OK.

    9. restart Windows.

    Hope this information helped you.

    Kind regards

    Arona - Microsoft technical support engineer

    --------------------------------------------------------------------------------------

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • It's on my screen and I don't know how to fix it... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. » __

    I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

    How to re-install the AegisE5.dll?

    I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

    How to re-install the AegisE5.dll?

    AegisE5.dll is linked to a network authentication system.  Because it is almost certainly only used with enterprise networks, you should communicate with your company, IT supports for assistance.

    If your computer does NOT connect to a corporate network:

    • What changes have been made recently to your network hardware/software?
    • You have a home network? Wired or wireless?
    • How is your computer connected to the Internet?
  • 6000 wireless mouse does not work with error Windows XP "it has not been verified with the Windows XP Logo."

    Original title: Wireless mobile mouse 6000 will not work on XP but when I bought it iwas sure it worked with Windows 7 and Windows XP.
    I bought a mobile wireless mouse from microsoft for more than a year for use on windows 7. When I bought it, I thought that I remembered, it also works with Windows XP, but I can't get the software to complete. I get an error message saying: it has not been verified with the "Windows XP" logo. Is it true, or is there something else wrong.

    Dave

    Hello
    The Wireless mobile mouse 6000 is compatible with Windows XP. I suggest that you download the drivers for the Windows XP operating system from the link provided below and check if the problem persists.

    Mobile Mouse 6000 wireless

    http://www.Microsoft.com/hardware/en-us/p/wireless-mobile-Mouse-6000#support

    You can also get in touch with Microsoft hardware support for assistance.

    http://www.Microsoft.com/hardware/en-us/support/contact-us

  • I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

    I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

    Hello
    The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

    Methods of resolution:
     
    I suggest you to download windows desktop search for additional and install.

     
  • message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

    I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

    Hi vlademer,

    D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

    Follow these methods.

    Method 1: Follow the steps in the article.

    Problems installing and uninstalling programs on Windows computers

    http://support.Microsoft.com/kb/2438651

    Method 2: Scan the file system (CFS) auditor to repair corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • my1402 has a slight flashingred with the letter E, but nothingwill impression

    my1402 has a slight flashingred with the letter E, but nothing will not print I was told to go to addremove programs and uninstall, but my printer is not on the list of programs

    Hi gjayand welcome to the Forums of HP.

    I see that you are having problems printing.  I would try to help.

    I recommend you to perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

    I suggest you then following the steps in this document on lights blinking.

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen.

    Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen, sometimes flashing. It is sometimes difficult to use the screen, especially when it has a dark background. It is a HP Desktop quad core with card Nvidia GEForce 9600.  I tried to roll back the driver, but that didn't help. I assume that the driver I need is no longer available. I also went to Nvidia to try to find a better driver that would eliminate this problem, but no luck.  Before, this came with an update on Vista, & I could correct in the way to roll back the driver. Any help would be appreciated.

    Go to www.nvidia.com and download the WHQL 306,97 drivers updated successfully.

    With the installation of Windows 8, Microsoft provides only the "bare" minimum drivers in order to complete the installation of Windows.

  • Danielle Beaumont has been a mobile video ' Design is fun! You want to bring up the menu even inside the accordion for the navigation panel. There are no on which left aside, as the way in which it has been triggered open with the icon. how he was placed

    1 Danielle Beaumont has been a mobile video ' Design is fun! You want to bring up the menu even inside the accordion for my own mobile navigation panel. He's left no aside, the way it has been triggered open with the icon; how he was placed to bump at the gap when selected via the icon; how it was considered first of all just a big green square; How the link boxes were made to be spaced as if they were... Can you direct me how to create it?

    2. also in trouble with the specification of fonts. There are times that I can choose a font from the list, I chose the additional fonts available and sometimes, when it just won't let me choose one, even if it is already used on the site or page.

    On a steep curve here, but any new information provide from my recent contact with Adobe has been extremely useful. My site is www.curricula101.com. It is much better than what it was when I called first a few days ago. Sales pages work fine now, thanks to your contribution.

    3. on the navigation path revised: a current question is menus horizontal separated for the GMAT and GRE goes everywhere at the top and bottom of the pages. I've specified particular States for text via the Site Properties > content > hyperlink styes on the default style. A bright color is chosen for the active state, but he does not like such (not at all). The other menu (home, Contact, schools etc.) made by the widget Menu runs perfectly until white color shows in the current page instance.

    There are a lot more refinement and content development to do for sales purposes.

    Thank you for your help.

    Best wishes to all at Adobe,

    Elleyne Kase

    Hi Elleyne,

    1. I have an article on the creation of an accordion menu on my site which may help. You can read it using the link below.

    How to create an accordion Menu in Adobe Muse | Creative muse

    2. I don't know too much talk of it. When you say additional fonts do you mean web fonts?

    3. see my reply in the thread below.

    Re: Text links not working properly - active or visited says doesn't work do not at all

    I hope this helps.

    David

    Creative muse

  • Photoshop has encountered a problem with the display driver cs6 - win7 64 bit

    Hello

    I installed collection CS6 Mater, whan I tried to enter in photoshop I got this window «photoshop has encountered a problem with the display and temporarily disabled driver development using graphics hardware...» »

    Whan I get is window, the "parameters of the graphics processor is gray - «photoshop detected a problem in your display driver...»» »

    I have laptop with AMD Radeon R7 M260

    Win7 64 bit

    PC Toshiba laptop satelite l50 - b

    Hi doriv,

    • Update your graphics card driver.
    • You have the graphical configuration Swichable?
    • As Mylenium says you must add this parameter in graphic control panel so that Photoshop can detect your card.
    • Open graphic switchable Configuration and add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop Cs6). See graphics switchable troubleshooting questions unde... | Community

    Kind regards

    Assani

  • I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    Photoshop has been giving me the warning:

    Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

    No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

    Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

  • Photoshop has encountered a problem with the display driver

    I've updated photoshop on my mac last night as it kept prompting me to do, and I have an exam tomorrow, which requires the use of photoshop. When I open photoshop this morning the following message appears:

    "Photoshop has encountered a problem with the display driver and has temporarily disabled the improvements using graphics hardware. Visit the Web site of the manufacturer for the latest version of the software. For more information, visit: http://www.adobe.com/go/photoshop_gpu_cc_en'. '.

    Can someone help me with this? IT IS URGENT!

    The problem is the driver for your video card, no Photoshop.

    Update the video card driver from the website of the manufacturer of the GPU (NOT Microsoft or a system integrator).

Maybe you are looking for

  • Forumla count only some text colors

    I have a very simple table where the SUM of each column calculates the number of cells that contain text. There are 26 lines, 1 for each letter of the alphabet is the formula I used: -. 26−COUNTBLANK(B2:B27) I want to add in the data of some cells to

  • Ideas: Insert an error code or give a brief description of what you are trying to accomplish or fix.__66A KB2160841

    Since 01/27/2011 I just noticed that he failed to upgrade and I'm still trying and doen't work don't want to upgrade what I do is my almost 20 times that I tried and not go, please help me.

  • HP recovery disc creation error

    I just bought a new HP Pavilion dv7-3085dx and a, m, trying to create such recovery as recommended by the system disks. Have tried to use DVD + R and DVD - R (Memorex brand) to complete this process. The program returns, checks the disk I insert and

  • Aspire drivers VGA Intel V7 - 482PG Error Message

    I raised suspicion that the intel VGA drivers installed cause me a BSOD (which happens when I alt - tab of a video game using the NVIDIA VGA drivers for my deskptop). I'm trying to update the drivers for Intel VGA found here http://us.acer.com/ac/en/

  • Touch screen no longer works after webosdoctor

    What are my options here? The language selection screen appears, but the screen does not meet my contact. The buttons on the side are still working though. Any advice?