Two questions.

I recently bought a 4 GB Fuze (revision 2) and I have 2 questions. The first is, when I go into control panel > info and watch my battery life, it will say I have x % of battery life, but if I scrolling up/down in the list of information several times, it changes (I guess is the REAL autonomy). For example, I arrived and he said 52% life left, then scrolled back and he says 42%, which seemed more accurate, judging by the photo-representation of the life of the battery. Does anyone else have this problem? It is foreshadowing something more serious in the future?

Secondly, when I play a song and go to the main menu list or artists, etc., how can I return to the current song play WITHOUT wait screen power off, and then click New, or without having to return to the song, making it to start from the beginning? Cause, it can be a little annoying to be listening to a song, while in the menu and not be able to adjust the volume until the screen turns off.

I'm not sure about your first question, but for your second, you can press the home button twice and it takes back you to the currently playing song.

Tags: SanDisk Sansa

Similar Questions

  • Re: Two questions on the recovery of my Satellite C850 / 09L

    Hello

    I had an unfortunate accident with a drink and my C850 / 09L while in the hospital, and while he was cleaning that I used my external hard drive on an old computer.

    Long story short, while making the usable drive I have in some way managed to make the unreadable UEFI and need a recovery disk to fix it (which I did not cause of course I was in the hospital when the laptop was given to me).

    I have two questions:

    (1) the recovery disk creator organize files in a specific way, or can I copy the whole partition on a USB flash drive and make it work?

    and

    (2) if I am able to use the recovery partition copied or obliged to buy a Toshiba drive, the recovery disk difficulty will be just the OS or it will wipe my files as well?

    1 / recovery disc Creator create a special bootable media that can be used for the installation of laptop recovery image. If you want to install the recovery image, you MUST create this bootable media.

    2 / Yes Yes please before you use it to backup all your important data.

    If you have any other questions you are welcome.

  • Two Questions of Partition

    I want to change the drive letter of a couple of scores. For the current configuration, see: http://paulrittman.com/CompMng.png.

    I want to do is make my score of documents (currently F), d.

    It is, the letter D is currently assigned to a backup partition. When I right click on the partition in the center pane higher in my screenshot, I don't get anything in the context menu, but a link to a help file. When I click on partition F, however, I don't see the option to change the drive letter assigned.

    In addition, if you look in the upper middle pane, you will see two instances of the recovery partition (D).

    So my two questions:

    (1) is there a way I can change the drive letter of the partition recoery? Or even if I can him, isn't it advised?

    (2) the presence of two lines to my D recovery partition in this upper middle pane means anything it either bad - such as, if I ever need, will be miss BIOS Windows / connection and refuses to start or restore from this partition?


    HP LaserJet p1102w

    Hello

    No, you cannot because the Manager of Recorvey needed. but you can create a recovery (DVD, USB) media and delete. Please note: you must correctly create and keep in a safe place.

    Kind regards.

  • Two questions about SP1 and Vista startup

    Hi all
    two questions:

    (1) I understand that if I want SP1 on my machine, I have to install manually, because it is not included in the automatic update routines?

    (2) my machine failed yesterday, I received a message "unable to start Windows. A recent hardware of software change might be the cause. "The only thing I can think is that before turning off the previous time, I inserted a USB hard drive to copy the files on it. But I continued to work normally on the machine. Another unusual event, it is the day before, it was very slow to start, so afer it finished start, I restarted.

    When the system could not start, I tried several times, automatic procedures that always ended with "windows cannot resolve the issue automatically,
    Contact your service provider. In the last attack, I also clicked on a 'Advanced tab' and restored the system, but it does not solve the problem. Then, this morning I turned on the machine again to write the exact error I have, and message instead, unexpectedly (and rather willingly), the machine starts normally. So, what could happen? Should I get my machine (which is less than one month) verified?
    Thank you!

    Paola

    Hi polla.

    (1) Yes, Yes. You must download and install SP1 manually.

    (2) No, I'm Don t think that you should check. I would say: work with it and if the error appears, back up all your data and restore complete your system, so you can exclude any type of software problem...

    Welcome them

  • I forgot my answers to the two questions iTunes how can I reset it please

    I forgot my answers to the two questions iTunes how can I reset it please

    You have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

    (139632)

  • two questions about the scattered images secure

    I created an image that is secure and encrypted for sensitive documents.

    I have two questions:

    1. when I use the disk (if it is up, open and available), and I want to add something to it, I usually drag the file everywhere where it is currently in its destination folder in the sparse image control.  But it automatically makes a copy - with the same name (not with a '-1' ever, not with a suffix 'copying' or 'alias').  Which defeats the purpose and makes things complicated - I find myself comparing what is in each location to make sure it's in the sparse image and then it makes me nervous to delete the original.  Why it does this and how can I change such as dragging a file in a secure location gives there is not that a second copy of it left in an UNsecure location?

    2. I'm using Time Machine backup drive sitting on my desk (and a separate utility for monthly clones on a different backup disk).  Automatically makes Time Machine backup the content of the rare picture even if the safe drive is not mounted, open and available?  I hope not, because that would undermine the usefulness of having a backup disk on my desktop running of ordinary Time Machine backups, but find it me just that all the steps I take of course I do not lose any data may be so overprotective I have thought/hoped.

    Sous_forme_d' addendum, I'll check my clone, but as I put this out there, I wonder if SuperDuper!, my application of cloning is cloning automatically secure disk content, so... like the thoughts of anyone about it if it's an application that they use).

    FYI: I'm running 10.11.2

    Thank you.

    (1) by default, OS X makes a copy with the overcoming of the limits of volume and moves when in the same volume.

    You can reverse this behavior by holding down the command key when you drop. You will see the insignia of the icon changes (green + for copy, empty for move).

    (2) Time Machine will return to the top of the image 'file', but only when it is unmounted. I do not think that it automatically includes the volume mounted, but I would like to check and add to the exclusion list.

  • Satellite M70-192: two questions on battery

    I bought a satellite M70-192 and have two question about it;
    1. when the battery is fully charged, I can leave the Ac adapter connected and power the computer on the sector or remove the battery to avoid overloading?
    battery 2-How long should power the computer if it is fully charged? (Approximately)

    Hello

    1. you must not remove the battery. Your device is the latest standard and batteries cannot be overloaded. It is recommended to occasionally work with battery power and pay.
    2. it depends on the use of the laptop. Usually, you should be able to use about 2 hours.

  • Two questions on Satellite L500D-00F

    Well, I have two questions.

    On my hard drive of diving, there are 4 existing partitions, and I want to create a new one for a dual boot of Windows XP. I currently have Windows 7.
    I can create a new, but when I try to format it, it says that there is too much existing partitions. 4 partitions are a recovery 1.46 GB, 435GB C drive, 17.86 GB and a GB 10.60.
    What are the 17 and the 10 GB ones for? Is it safe to delete them to make room?

    My other question is where can I find the drivers for my laptop?

    I don't know where you bought your laptop model and the structure of the partitions is not known to me.
    Googling around, I found some info and assume you have the Canadian cell phone model. Can you confirm this?

    Anyway, Canadian download page, you will find under http://209.167.114.38/support/Download/ln_bymodel.asp

  • My new Thinkpad S1 Yoga has two questions

    I got myself a Thinkpad S1 Yoga (20cd) and I have two questions;

    (1) the wireless lan driver fails and booting. (Dual band AC 7260)

    (2) the trackpad acts as a simple mouse. (ultranav driver is installed)

    I am running Windows 8.1pro (x 64). All the drivers are updated and updated the BIOS.

    Driver wireless lan starts normally when I disable the USB3 support in the bios or disable it "Intel (r) USB 3.0 eXtensible Host Controller - 0100 (Microsoft)" in Device Manager of.

    When I enable and disable the driver lan wireless driver again operating normally.

    The trackpad does not support actions such as scrolling.

    Kind regards

    Roberto

    Well the ultrapads issue is resolved. I uninstalled the ultrapads driver and the driver synaptics windows. After the reboot, the pavement was a standard ps/2 mouse to the microsoft driver. Change install the latest driver from ultrapads I have a thinkpad tab in the mouse control panel.

  • Two questions in table "While loop"

    Hello

    I have two questions about creating tables in while loops. I'm using LabView 8.5.1.

    In its simplest form, my current while loop (delay set to 0, 2 s) has 3 variables that have been changed by moving a slider. They are each sent to a line in a block of 'Building the table' (data type is DBL 1 d) - this table is then written to a spreadsheet file, such as the three values are written to a new line (one value per column) whenever the while loop runs.

    Question 1

    How can I add a column 'Time' in this worksheet? In other words, get at the present time the loop works since then, from 0 seconds in the spreadsheet, via the table block building.

    I can think of how to do this with a loop For, but given that the While loop runs through an unknown number of iterations, I can't figure out how to get the counter to work.

    Question 2

    How can I text column headings on the worksheet?

    Thanks for the help and if you need anything anyone stating, please let me know

    To answer question 1:

    There is a function of 'Elapsed Time' you can put as the first colum of the data.

    This then reformatted your spreadsheet as
    Time Data1 Data2 Data3

    Time Data1 Data2 Data3

    Time Data1 Data2 Data3

    etc...

    To answer question 2:

    Build a table of positions, then write this table in the file only once, outside the loop.

    Your table with the data and time will write inside the loop.

  • Two questions on the HP Envy 700-230ea before you buy

    I am looking to buy a HP Envy 700-230ea of PC World.  The plug that I saw didn't quite answer two questions that I have to solve before committing myself.

    1. the operating system is Windows 8.1 installed the 64 bit version (I need it to be)

    2. the machine is supplied with a 2 TB HARD drive.  But I need to add a second 2 TB HDD.  Is it possible to do it in the machine?

    On your HP UK Site, I would say that it comes with 8.1 / 64 bit and it has 3 internal hard drive bays; 2 external optical drive bays.

    Link http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#! % 3Dspecs tab

    Be forewarned of desktop computers HP ENVY do not come with a manual, just quick pictorial international owners set up guides, and there are no available records. The Windows 8.1 operating system can control, but for the computer itself no manual, it's like buying a new car, try to understand all the switches, levers and lights. Most are easy to understand, but some are not but I would like to contact PC World and make sure he has the 64 bit OS.

    Link http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#! % 3Dspecs tab

  • Can someone help me with two questions regarding my PowerShot SX540HS?

    I'm generally pretty tech savy, but I'm having problems with two very basic functions on my PowerShot SX540HS.  I downloaded the complete operating manual and followed the instructions to the two questions, but I am unable to answer these questions after a lot of testing with the camera settings.

    1. is it possible to force the flash to the position, but keep any AUTO value? (I need an additional light on the African-American faces when shooting outdoors).  The manual States that there should be a setting IT for flash, but all I see is auto flash or disabled.  I don't see a setting IT allows me to force the flash fires.

    2. I need help with how to set up the camera to focus on how to features of landscapes in the background (such as a mountain range) instead of focus on something more about that appears in the frame, perhaps some leaves from a nearby tree.  When I tried testing the manual focus by following the instructions in the manual and set the focus to infinity, ISO camera settings went haywire and I got a completely overexposed photo.

    I'd appreciate any help.  I thank you very much.

    Your welcome!

    The brightness problem is your camera set to have the i-contrast on Auto? If this is not the case, try this to fix the bightness of images that you have taken or will take.

    You can of course put the ISO and shutter speed manually too in P mode for pictures where I contrast does not work well for you.

    P mode is basically the Auto mode, but it allows you to make changes where you want.

  • Stream flow 11: 11 cards SD - two questions

    Just bought a HP Stram SKU K3Y85UA #TBA 11. I guess that's a d011, but that does not appear on the label, it shows as AU58Y3K model number, which I cannot find in any of the manuals - maybe I'm looiing in the wrong place? In any case, I have two questions about SD cards:

    1. (both parties question) what is the speed of the interface of SD card? A class 10 card will provide a benefit or a card low speed will be just as fast because of the limitations of the interface?

    2. has anyone successfully used an SDXC card with this laptop? I know that he is apparently not supported. Linux not is not supported either, but works very well. I hope to be able to use a 64 GB card in the slot.

    RockDoctor wrote:

    Just bought a HP Stram SKU K3Y85UA #TBA 11. I guess that's a d011, but that does not appear on the label, it shows as AU58Y3K model number, which I cannot find in any of the manuals - maybe I'm looiing in the wrong place? In any case, I have two questions about SD cards:

    1. (both parties question) what is the speed of the interface of SD card? A class 10 card will provide a benefit or a card low speed will be just as fast because of the limitations of the interface?

    2. has anyone successfully used an SDXC card with this laptop? I know that he is apparently not supported. Linux not is not supported either, but works very well. I hope to be able to use a 64 GB card in the slot.

    Something similar but read this...

    http://h30434.www3.HP.com/T5/other-notebook-PC-questions/HP-envy-13-d008na-can-it-use-a-SDXC-cards-printed/m-p/5359100#M134760

  • two questions about apps headless

    Hi gang,.

    I have received the approval of _sys_headless_nostop (yay!) and started to refactor my app to be headless.

    I'm having a little difficulty and could use a couple pointers.  Two questions to begin:

    1.) once I receive permission, I have to do something special?  I updated my token, created a new certificate and generated new tokens of debugging, but when I look at the details for the debug token, I do not have permission to _sys_headless_nostop listed.

    2.) I found a few threads which implies that the only way to debug the part without the app is using instructions qDebug().  Looks like you can not attach a debugger or profiler.  is this true?  How are you supposed to make sure the party stays within the limits of resources imposed on applications without a head if you cannot debug, diagnose and profile headless?

    (3.) the page of stunts on apps without head said to remove the bar - descriptor.xml draft without a head, but some discussion in the forums show examples of how to set up the bar - descriptor.xml for the part without the app.  the headless part requires a bar - descriptor.xml or not?

    (ok, that's three questions!

    Thank you!

    J

    1. your permissions without head non-stop remains on BlackBerry Signing Server. When you export your app, IDE will contact Signing Server to sign your application.

    2. I can't use qDebug to debug, I connect my own debugging string in the HUB

    3. headless part has no need of bar - descriptor.xml, I guess it's useless there.

  • Custom menu item at the request of Message: two questions

    I try to add a custom menu to the Blackberry message request and get two questions:

    1. When you click the custom menu, the "Application.getApplication () .requestForeground (); method call does not call the main() method of my application "DemoMI".
    2. If I changed the method of

    Application.getApplication () .requestForeground)

    TO

    ApplicationManager.getApplicationManager () .runApplication (app); Where app is the "DemoMI" application descriptor

    Will be called the main() method. However, how can I make the subject of the Message around in the method "run" for the application "com.demo.DemoApp"?  I tried to use a static variable 'mi ContactsDemoMenuItem', but I've always had "null" value when the "main()" is called.

    My environment:

    • JDE: 4.2.0
    • Feature: Pearl 8100 with OS 4.2.0
    import net.rim.device.api.system.*;
    import net.rim.device.api.ui.component.Dialog.*;
    import net.rim.blackberry.api.menuitem.*;
    import net.rim.blackberry.api.pdap.*;
    import javax.microedition.pim.*;
    import net.rim.blackberry.api.mail.Message;
    import net.rim.device.api.ui.UiApplication;
    import net.rim.device.api.ui.*;
    import net.rim.device.api.ui.component.*;
    import net.rim.device.api.ui.container.*;
    
    public final class DemoMI extends Application
    {
        private static final String ARG_LAUNCH_CONTACT_DEMO = "1";
        private static  ContactsDemoMenuItem mi;
        public static void main(String[] args)
        {
            if(args == null || args.length == 0)
            {
                DemoMI app = new DemoMI();
                app.enterEventDispatcher();
            }else
            {
                String appToLaunch = args[0];
                if(ARG_LAUNCH_CONTACT_DEMO.equals(appToLaunch))
                {
                   new com.demo.DemoApp(mi.getMessage()).enterEventDispatcher();
                }
            }
        }
    
        DemoMI()
        {
            long locationToAddMenuItem = ApplicationMenuItemRepository.MENUITEM_EMAIL_VIEW ;
            ApplicationMenuItemRepository amir = ApplicationMenuItemRepository.getInstance();
            ApplicationDescriptor app = ApplicationDescriptor.currentApplicationDescriptor();
    
            app = new ApplicationDescriptor(app, new String[]{ARG_LAUNCH_CONTACT_DEMO});
            mi = new ContactsDemoMenuItem(app);
            amir.addMenuItem(locationToAddMenuItem, mi);
            System.exit(0);
        }
    
        private static class ContactsDemoMenuItem extends ApplicationMenuItem
        {
            ApplicationDescriptor app;
            Message msg;
            ContactsDemoMenuItem(ApplicationDescriptor app)
            {
                super(20);
                this.app = app;
            }
    
            public String toString()
            {
                return "My Menu Item";
            }
    
            public Message getMessage()
            {
                return msg;
            }      
    
            public Object run(Object context)
            {
                if ( context instanceof Message )
                {
                    msg = (Message)context;
                    try
                    {
    
                        Application.getApplication.requestForeground();
                        //ApplicationManager.getApplicationManager().runApplication(app);
                    }catch(Exception e)
                    {
                        e.printStackTrace();
                    }
    
                 } else
                 {
                    throw new IllegalStateException( "Context is null, expected a Contact instance");
                 }
                 return null;
            }
        }
    }
    

    What you see is the expected behavior.  The ApplicationMenuItem runs in a different process where your application was run.  You have two options.

    You can store the subject of the Message in the RuntimeStore when the ApplicationMenuItem is called.  Your application you are undertaking could then read the subject of the Message of the RuntimeStore.

    Or you can create an application based on the drawing below:

    How to allow - a listener in the background to detect and update a GUI application
    Article number: DB-00406

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800783/How_To _...

  • Two questions on MapField (GPS permissions) and the map display

    Hello world

    I have two questions about the use of the Mapfield (for OS 5.0):

    First of all, it is possible to invoke the Permission of GPS is fast at the start of the application rather than the first time, you open the card and use the GPS?

    Second, I use a MapField in my application, and the map that appears on the device is only to show a green background with diagonal black lines and circles white - as if there were no card information to show. I tried to load many different places, and I get the same result. On the Simulator, I get the most actual plan information.  Does anyone know why this might be happening?

    Thank you!

    regarding your first question:

    use an applicationpermissionsrequest for that object.

Maybe you are looking for

  • Notegorical app?  IOS 10 support?

    Hello - I was using Notegorical app to track very important info.  However, as I downloaded iOS 10, I can only see the notes I made, I can not add or copy/paste into another application.  Can someone tell me how to solve this problem or move my info

  • clip + will not play through the car usb connection

    I just bought a clip + to play in a car I just got.  The car has a USB connector that allows radio control to the player.  I loaded songs, all mp.3 off, on the 8 GB drive and tried to play through the car.  He plays for a few seconds then stops and f

  • Wallpaper Windows 7 stuck on "stretch"!

    Hello world I know it is an extremely important issue, but it seems that no matter how many different ways I try to toggle the settings of my wallpaper of "stretch" to "adjust" or "mosaic" or any other option, it always comes back to the back to stre

  • Windows have built in Spam Blocker?

    Windows have built in Spam Blocker?  I received mail addressed to other people.

  • How to manually remove a program

    Hello I got a program installed, but when pressing remove in Add/Remove Programs, it asked me to locate the uninstall.exe on some discs, I've ever had. I want to remove, so I deleted the program files, and that more som reg keys, for example the prog