Two screens DVI on Port Replicator II with Tecra S10-160

Hello to all 2!

Right now I'm working with two external 19 "TFT screens connected to the Port Replicator II (Tecra S10-160 inside with closed screen). A display is connected to the DVI port available, the other is connected on the available on the Port Replicator II VGA port.
A single display (DVI) is used as the main office, the other (VGA) is used as office improved (both show different content).

My problem is the poor quality of the VGA signal and the problem, my two new screens are only supported DVI.

Is it possible to connect two DVI displays to the DVI - D Port Replicator II? I already checked several DVI-Y-cables, but I'm still looking for a solution connect two displays via DVI with the function to get two split screens and not the same content on both screens.

Hope you got my point and have information or ideas for products for me.
Thanks in advance.

Hello

Have you already tested a VGA to DVI? So, you can use the VGA connector on the port replicator and your monitor's DVI port.

I mean such a cable like this

Such an adapter you can always use the function to get two split screens and not the same content on both screens. :)

Tags: Toshiba

Similar Questions

  • Use of DVI port on Port Replicator II with Tecra S11 - 11G

    Hello together,

    I use a Toshiba Tecra S11 - 11G with port replicator.
    I use an external monitor L1950, it is connectetd with VGA cable.

    Now, I want to use the DVI Port of port replicator, but the monitor did not detect the signal.
    Is it possible to use the DVI connection?

    Kind regards

    Michael

    Hello

    Your Tecra A11 does not support DVI port
    The Replicator replicates the ports available for laptop. But if the mobile phone does not support a certain port, then the port replicator is not able to reproduce such interface so I guess that's the reason why DVI ports could not be detected using port replicator.

    PS: did you install the driver provided with USB 2.0 Port Replicator II package

  • Portege M200: big screen via the port replicator

    I have a Portege M200 with APR III. I realized that the DVI Jack does not work with it, even if for some reason any, even though they are not supposed to all other ports don't. EACH of them!

    What I'm asking today is how the hell can I get the laptop out on the big screen through the APR? I tried everything, it has the chipset nVidia go 5200 FX (which is able to output DVI according to nVidia)

    I just got a Philips 20 "widescreen TFT and got tired of watching her in the stretched standard resolutions.

    One of my friends has also Tosh lappy, but it's a Tecra 9100, which will be released on the big screen without any questions whatever it is standard, it appears as an option in the Billboard settins. In addition, nVidia say that this chipset is capable of custom resolutions, but I can't find it in the updated anywhere driver.

    Can anyone help?

    Hello

    Well the Tecra9100 is not a Portege M200. Are completely different books.
    The M200 protected does not support these interfaces.
    This is a technical limitation, that the port of mouse PS/2 keyboard PS/2 port, serial port, I Link (Firewire) port and DVI port
    will be not supported on the Advanced Port Replicator III, if a protected M200 is moored.

    The following ports are supported and can be used:
    Line-in Jack, taken Line-out, USB port, port external monitor, parallel port, taken Modem, LAN jack, DC IN 15V, housing for security lock, locking the computer.
    In the documentation for the Advanced Port Replicator III is a 'fact sheet for III Advanced Port Replicator"sheet where this limitation is descripted.

  • Express Port Replicator II and Tecra A10 - 12Z - only the power and LAN

    Since my Toshiba T3600CT I received with docking station, I discovered that I have a docking station. In the meantime, I had a small Sony who had no docking station, for which I got one of the first USB docking station and since then I've seen always to get laptops with docking station.

    But this time something went really wrong, the Toshiba Express Port Replicator II PA3680E-2PRP provides only power and LAN. There is no power in the USB ports, so no serial port or the sound, and DVI and VGA are also disabled.

    All these ports work fine on the Tecra A10, but not on the docking station.

    Of course, it is nice to have the power and LAN, but not when I expected too much of everything.
    So I was wondering if anyone has had a similar problem, it is like upgrading the BIOS for me who have not installed all the necessary software, or is it a fuse or something I could fix myself or is it a faulty docking that shouldn't have left the factory?

    Hello

    What's your Tecra pre-installed with original recovery image?

    When the laptop is preinstalled with recovery image simply connect compatible laptop Toshiba docking station and all the devices connected to the docking station will be recognized correctly and all available ports should work fine.
    Is that a Port Replicator basically "replica" ports on the laptop.

    On this virtual path, we cannot say that this port is 100% OK. What can you say about it? you bought is used a?

  • Reference number for the Port Replicator for Toshiba Tecra A10 - 11I necessary

    Hello

    I hope my question short and precise to get a short response and precise.

    To search for the product mentioned on the Internet, I would need the model number Toshiba Replicator port for Tecra A10 - 11I. I am sure that such a product is, I think I saw somewhere.

    Thank you

    bwprius

    Hello

    I think you could use the Express Port Replicator Docking Station PA3508E-1PRP

    It should be compatible with the Tecra A10 series.

    Search in google for this part number and you should find some nice offers

  • Advanced Port Replicator III and Tecra M5 - compatibility issue

    Hi all

    Had a brief search, but could not find a similar position.

    Is the Advanced Port Replicator III PA3314E-1PRP compatible with a laptop Tecra M5?

    Thanks in advance and amicably.

    James

    Yes, it is compatible, I can confirm this info above
    If you wish, you can consult the Web of Toshiba Europe site Options & accessories.
    You will find this info useful

  • Procedure for undocking of Port Replicator III on Tecra

    I don't have a manual for my docking station. What is the procedure of disconnection from my Tecra laptop, please? I see a button on the right side of the dock next to a green LED and the 'Sign-out' icon appears in the start menu. If I loose, is my LAN connection automatically restored when I snaps again?

    Thank you very much

    Hi Jasper

    I also use Tecra with docking station and please always do it on this path:

    When you want to remove it from the docking station laptop, click START > DISCONNECT the COMPUTER (close to Log off and close button). If you press it a little window to disconnect the computer occur. The option eject the PC chose and wait a second.
    The connection is interrupted and you can remove it using small hand gear on the delicate side.

    If you put the laptop in a docking station so that the connection to the local network will be established automatically just after a few seconds.

    Good bye

  • Connection of two screens on the PA3508E-1PRP Port Replicator

    Hello

    Anyone know if you can connect two screens on the port replicator? and use it with the option "extend my desktop" in Windows?

    Thank you

    Concerning

    It seems that you're talking about the Toshiba Express Port Replikator for Portege M400.
    In my view, the Port Replikator Express supports simultaneous use RGB & DVI only if the portable computer system unit itself also supports the simultaneous use of RGB & DVI.

  • LT2323z - connect to the USB 3.0 Port Replicator

    I just bought the LT2323z monitor to go with a X carbon 1 and connect via the USB 3.0 port replicator.
    However the LT2323z has displayport digital connections and the DVI-d port replicator. Any ideas how to connect to their place? Here are the flagship of Lenovo products, bought directly with Lenovo, but they do not seem to be compatible. I'm missing something until I send them all back for my money!

    The LT2323z, take the VGA connection, which takes care of your USB docking station 3.0 with the adapter DVI to VGA, which is included in the box. But the quality of the video connection is not terrible.

    There is no solution from docking station USB supported displayport. If you need to connect to the screen, you must use a direct miniDP to DP cable connector (which is unfortunate).

  • Socket DVI - d / port seems to have blown

    Hi all

    I have 2 monitors.  The 'blue' connector, using the other uses the 'white' plug  It seems that the white plug has blown (dvi - d) with power outage due to storms in Brisbane this weekend.  Both monitors will work using the blue plug, it's not the monitor.  But no monitor works with the dvi - d connector / white.

    Question: is it likely to be a failure at the end of the cable screen (IE port), or at the end of the laptop cable IE port)? I'm mobile of thought, given that both monitors are working ok with blue Cap.

    I can't decide if I'm going to need new monitors or a new laptop!

    Manda moo.

    Test two monitor DVI - D ports, using a different cable, DVI - D and, hopefully, another computer.

  • Tecra A10 - poor display through the port replicator

    I have an error with one of my clients, they have 3 x Tecra A10 is bought in the last three months, the last time being last week.

    I get a very poor screen through the port replicator, lines running through the screen almost like the lines of scanning, or RF interference. It happens on all three laptop configurations.
    We have new Phillips 19 "wide and 22" widescreen, I also tried a HP 19 "wide where else in the company. also having the same problem. These monitors are working 100% if hooked up to a computer or DIRECTLY into the laptop A10, as soon as you plug them into the cradle we get lines through the screen.

    I'm learning to communicate with the provider in order to replace it, because I have three already do the same thing, I'm pretty sure that I will receive a fourth with the same error.

    Someone else has the same problem?
    According to me, this issue has been raised on another forum, but was not answered. Does anyone have a solution?

    Please can you tell us which port replicator you use and which port replicator port?
    BTW: you are an authorized service provider?

  • Tecra A11 for PA3508E-PRP1 (Express Port Replicator)?

    The Express Port Replicator PA3508E PRP1 can be used with Tecra A11? Given all that I have read the answer would be no, or Advanced Port Replicator or Express Port Replicator II would be necessary. But the port replicators are very similar on the upper side (connectors). Perhaps it is an old item that no one it lists as compatible more precisely?

    is that you must use compatible devices only with laptop Tecra yout and according to specification for your Tecra A11, you can use Express Port Replicator II with PA3680E-1PRP part number.

    This port replicator is designed for latest Tecra and Portege laptop models.

  • Tecra A11 - Compatible to express port replicator?

    Hey people, does anyone know if a Tecra A11 can be used with version PA3508E of the Express duplicator?

    Cannot afford the new while I'm between jobs, and I saw one of these 2nd hand on ebay.

    Hey

    Replicator Port Express is not compatible Tecra A11 and Tecra A11, you use the Port Replicator II with PA3680E-1PRP part number specifications.

    The second version of this port replicator is designed for these new models such as the Tecra A11 :)

  • Toshiba PX1173E - 1PRP USB 2.0 Port Replicator II windows 7 drivers

    Hello, I can, t find windows7x64 drivers for my Toshiba PX1173E - 1PRP USB 2.0 Port Replicator II. I find the driver for win vistax32, but it's not work.

    Hi Michel,.

    The point is that 32-bit drivers will not work on a 64 bit OS and you can get all the drivers on the Toshiba page:
    http://EU.computers.Toshiba-Europe.com

    But it seems that there is no 64-bit available driver and you can use t Port Replicator II with 64-bit so far :(
    Maybe Toshiba going 64-bit in the near future

  • Radio Frequency Interference on external monitor with Tecra M10

    I have a Tecra M10 that seems to emit RFI, causing lines of interference on the external VGA monitor and audible interference on its speakers.
    I was worried that this might be a hard drive in trouble, but before the call to support, decided to continue the investigation.

    First I tried unplugging all USB devices; the intervention was still there, so I tried to unplug the PC from the Express Port Replicator.
    As I moved forward, the noise has been reduced, and this led me to check the power supply.
    The unit is a 5 amp unit, PA3378-3AC3, and that seems to be the source of the DDR.

    Port replicator came with a spare unit 5 amp, PA2521E-2AC3, but there is too little noise from it.

    So I checked the two supplies with and without the duplicator.
    Noise each time.

    Suggestions - is something wrong or it is to be expected with the Tecra M10 RFI?

    Hello

    Have you checked if the same question would be displayed using the laptop with the own plugged AC adapter.
    Someone had very similar problem and it was a problem to the ground using a power cable 3 pins for different could solve this problem.

    But of course the question could be also related to the monitor cable external doggy.
    The user in this thread has this issue.
    The replacement of the power cable supplied with the monitor helped.

    It s worth a try check it out...

Maybe you are looking for

  • Once I refreshed, when I go to pull down to a previous visit, it loads the address bar, but will not go on the site.

    Everything was going well until I refreshed Firefox. Since then, the address bar does not work. If I type in a website or attempt to use the drop-down menu to access a previous site, the site loads but does not "join the service or go the arrow." It

  • read the multiple analog inputs at the same time

    Hi all I use USB-6001 and want to develop an application to multiple tasks in C++. I try to read several analog inputs at the same time, but got some errors. To put it simply, I copy one of the sample code to read in analog data in a channel, and the

  • Outlook update problem

    Please see this thread for message regarding an update to Outlook that causes an error and requires the latter to drag / and slow down considerably.  Uninstallation of the update fix the problem.  You must fix this. http://social.technet.Microsoft.co

  • convert xm recorded in wmp

    How can I change the format to convert the recorded XM Helix recorder media to Windows Media Player?

  • G7-1310US processor upgrade

    With popular that this thing seems to be, I am surprised that I have not found any information about it... I have a G7-1310us I want to upgrade the CPU for. Currently I have a G2 i3 - 2350M @2.30 GHz, Socket 988 B rPGA (information from CPU - Z). My