Two-sided printing does not

Similar Questions

• HP 2549: HP 2549 and Mac OS x: double-sided printing does not work

  Hello!

  I just installed this printer on my Macbook Air and I cannot print double-sided. I tried by USB / wireless (in the case where there is a difference between the two) but no luck.

  I followed the advice in this post: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/two-sided-printing-no-longer-availble-...

  but I did not tab "driver". I only have "Général", "Levels of power" and "utility." I tried to delete the printer and then add it with HP 2359 and AirPrint not but that does not change.

  When I print a pdf document, double-sided printed is greyed out and I cannot change.

  What should I do? I already reinstalled the drivers on the HP Web site, I selected all the things that I can install it, but that has not changed anything.

  Thank you.

  Hi @blablaalf,

  Welcome to the HP Forums!

  I see that two-sided printing does not work with your printer HP 2549 on Mac OS X 10.10. I'm happy to help with this problem!

  I assume that your printer is a HP Deskjet 2549, otherwise please reply with the exact type of printer you have. To find product/model number of your printer follow the instructions in this link. Find your model number of the HP product.

  Otherwise, if the type of printer you have. According to this guide, print on both sides of the paper (duplex printing). He said: this printer is not an automatic duplex unit integrated, you can always print on both sides of the page to manually reload paper in the paper after printing tray first to print on both sides of the paper.

  This is the reason why this option is grayed out.

  If you print on letterhead, pre-printed paper or paper with watermarks and pre-drilled holes, the printer prints first the front of the document. Load the paper with the top edge first and the side to be printed facing downwards.

• What would cause two-sided printing is not working properly in Acrobat Pro and InDesign?

  I need help with a problem of double-sided printing that occurs only with a document created in InDesign, and then turned into a PDF Acrobat file. It is a simple single page 3, paper 8.5 x 11 with nothing weighs on the marges.5. I went to print it out on my Epson Stylus 7620 duplex, but it does not print correctly. It is printing page 1 on a single sheet of paper without even attempting to add the second page. Then it prints the third AND second double-sided pages. I looked to make sure that there is no box "print separate cover page" checked. I also made sure 'normal pages order' has been selected and not reversed. I checked to make sure that nothing was hanged on the page which may cause the printer to that there is an additional page between pages 1 and 2. I turned the document to Adobe PDF (for InDesign), but the PDF did the same thing. It prints 2-3 as a double-sided pages and page 1 on one page on a single sheet of paper. Obviously, I want 1-2 pages to print double-sided and 3 of the page into a single page. I called Epson, but they said that because other documents are printing correctly, it is not a printer problem, but Adobe software / printer box question, very probably in the InDesign document. I can't find. Has anyone else encountered this problem? Can someone help me with this?

  Using Acrobat Pro and InDesign in creative cloud. MacBook Pro running 10.11.4

  You'd better ask this question in the InDesign forum where more people we'll see.

• Want to 5532:2 - sided printing does not work - want 5532

  I try to print a document 2 print sides.

  Checked the box 2 faces, went to the layout and choose binding on the long edge. Then print and only one print at a time, no double-sided.

  Had a HP printer before (who died) and with the exception of check 2 box sides, had nothing to do.

  Bougth this printer precisely because it is supposed to print double-sided.

  Help!

  Subsequently resorted to call HP support for the United Kingdom.

  Thanks for your help!

• Photosmart 7525 does not as advertised two-sided printing

  I just bought a printer Photosmart 7525, partly because my upgrade to Maverick on my MAC is my 3200 Series obsolete and she was acting strangely.  The new printer has taken longer to implement than I expected (not exactly an intuitive process and he had not provided all the guidance documents). I managed to get more work, but there is no option to select two-sided printing when you print directly from Word. I had to go through 3 non-intuitive screens to find the print options for the pages even / odd - it's much easier to save in pdf format and get rid of Acrobat.  But I still do not think the double-sided printing option that is promised in the product documentation.  I find some online reviews maybe I need an accessory, but I thought that the product has come with the ability.

  Please notify.

  Thank you

  Hi hybridgeek,

  Thanks for keeping me posted. Unlike programs preinstalled, Mac print options two sides is hidden in settings. If you open the print dialog box, click on the area of lowest selection - Copies & Pages, select from the drop down.

  Set the duplex option as the binding Edge Long (Portrait) or binding Long Edge (landscape). You can save the settings for later use by clicking preset > save current settings as a preset and naming.

  Source: Post Re the ShlomiL: how to double face printed word when NO option for "2 Facer" when printing on HP

  Please let me know if that fixes the problem, thank you

• How to enable two-sided printing on MacBook Pro with Canon MX490 printer

  Hello

  I have the MacBook Pro (retina, 13-inch, early 2013) and OS X version 10.11.4 (15E65) and Printer series Canon MX490.

  When I try to make a double-sided, the printer settings printing does not allow me activate two-sided printing.

  

  Also when I go into the settings of the printer, there is no option for me to select this option to enable printing double-sided or duplex printing etc..

  

  When I try to print with TextEdit settings, I still get the same printer settings and it does not allow me to enable two-sided printing.

  I couldn't find answers online, and frankly it's frustrating. I would appreciate if anyone can help with the problem.

  Thank you very much!

  This is the screenshot of the settings under the printer to textedit. Sorry I don't tie with the original message earlier.

  

• Need help with the issue of two-sided printing

  We have a printer D1350.  It is directly connected to a PC and shared with other computers on our network.  In the past I printed two-sided with binding on the long edge with no problems at any one of the computers.  Recently he began to ignore my settings and print double-sided copies with link short edge no matter how I said to print from a PC.  All other PCs are able to print correctly.

  All PC's had Windows 7 OS when the problem started.

  We have upgraded to Windows 10 and the printer does not at all, we uninstalled the printer drivers and then re-installed both and it will not print correctly from a PC.

  I checked for updated drivers, still will not print properly with a PC.

  What arrangement could have changed on this PC it's ruin?

  Help!

  This is not a Canon support site. Its a forum of the users in charge.

  Give Canon a call at 1-800-OK-CANON.

• OfficeJet Pro 8000 double-sided printing will not respond to the control software #2

  Win XP Pro SP3

  OfficeJet Pro 8000 Wireless

  Does anyone know why Officejet Pro 8000 had control of double-sided printing, removed from the spec software?

  Does anyone know if there is a printer of this type which will respond to such control?

  UPDATE!

  ----------

  This printer is now works very well with total control on duplex printing. But how did this happen...?

  Two things have changed - well, maybe three.

  But first of all to mention another very annoying problem: wireless printer to my network connection always collapsed which was a double nuisance (23/06/2016 see also installing the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0)

  The road to happiness... I've finally updated my PC to a laptop HP Win7 (there is a problem with the laptop, but that's another story...)

  During the process of setting up laptop, I had to set up the network and add the printer. In between aid was a FAQ something like "the wirless connection drops regularly." What interested me.

  The fix was so simple - mychosen IP address has always been in the DNS range which was probably not very smart, but I didn't know any different. No one had ever mentioned before.

  The idea is to select an address in the static range IE outside the DNS. So I took a number x.x.x.249 and bingo!, a solid and reliable connection that is always there.

  Given the new laptop for download the drivers again. What went well and of course, the new machine is much faster.

  Anyway after a few tries, much to my delight I discovered that two-sided printing worked with auto rotation if I check the box. Printing a document like that I would see in portrate (horizontal spine) and read down the two pages, turn to the next page and the same thing at the end of the document. Or, if you use the rotation of non - normal mode - the printing orientation is 'normal '.

  It's a shame that it was necessary to buy a new laptop with a new o/s just to discover the problem by chance...

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Want 5530: Printer does not print in black ink

  I recently updated my HP 8.1 Windows of Windows 10 laptop.  I have the same type of printer (Envy 5530) installed at my other House and updated my desktop computer for Windows 10 and had no problem with printing, but now I'm with the laptop.  I try to print documents now and the printer does not print anything using black ink.  Color ink prints, black ink just not. The two jets of ink are filled.  I did all the "try these patches" suggested Windows and HP Print doctor.  I uninstalled and reinstalled the printer twice.  I rebooted the computer several times.  I'm no tech person by any means and have no one to help me or ask what else to do. Can someone help me understand this please?  Thank you!

  Hi @KKLfromIA,

  Welcome to the HP Forums!

  I understand that you can not print in black with your printer to HP Envy 5530 on Windows 10. And I'm happy to help you!

  You use genuine HP cartridges or refills?

  One of your ink cartridges, low or empty?

  In the meantime, try the following solutions:

  Solution: remove the black print cartridge

• 7510 Photosmart HP printer does not print

  I have problems with my printer does not print.  I printed a report successfully, but when I go to print from Photoshop, printing that says "print page 1, 0% complete" and nothing never goes out.  I turned off the printer and restarted the computer, and then he turned his back.  I unplugged the power cord to the printer and the wall, has waited more than 15 seconds, plugged everything back in and nothing has changed.  I have requed the print job whenever I did these things to solve problem above, but nothing has changed.

  I used to be able to easily print wireless from my Mac.  Then one day it stopped working.  Then I connected the USB cord to connect it to my Mac, now it does not work.  All boards with one or two printing problems would be greatly appreciated!

  OK, check the router firmware is updated.

  Then download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-96959-2&cc=us&dlc=en&lc=en&os=219&product=5070121&sw_lang=

• I have a Dell (Dell V305) printer that is only a year. He has been guaranteed. What was happenning, is that the printer does not print up what I uninstall/reinstall.

  I'm having a problem with my printer does not print.  What I do I uninstall the printer and reinstall then it works very well for a week or two and then the problem starts again until I have reinstall the printer again.  The printer has ink, so it's not the problem. That's how I know it does not print: when I try to print a cartridge level page show empty and I can't print.  Yet once, when I uninstall/reinstall the printer, then the catridge levels show complete and then I can print.  I thought that maybe it could be that some issue that when I uninstall the printer that not all components are removed.  I uninstall not uninstall printer functionality and not the Add/Remove Control Panel.  Uninstall from the control panel would solve this problem?  Please notify.  Thank you, John

  Hi sockers,.

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  4. you receive an error message when printing?

  I suggest you run the fixit tool available in the link when you are unable to print on the computer and check if it helps below.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  If the previous step fails then I would suggest that you uninstall the software from the printer to the computer using the method mentioned in the link below and then install drivers from the Dell site.

  Uninstall Dell V305

  Drivers & downloads for printer V305/V305w AIO inkjet

• Laser jet 1018 HP printer does not

  Original title: Laser jet 1018 HP printer does not

  I have a Laser jet HP 1018 and lost the disc printer if I can get any computer to be able to communicate with him. I downloaded the software that I thought I was able to run the printer, but nothing works. What else can I do to get the two to talk so I can print?

  Hello

  ·         You get the error message?

  ·         Did you install the printer without any problem drivers?

  ·         Were there recent changes made on the computer before the show?

  Step 1:

  Follow the form of measures troubleshooting article and check if that helps.

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Step 2:

  Try to remove old drivers and reinstall the most recent drivers from the HP website and check if it helps.

   

  Add or remove a printer

   

  Find and install printer drivers

  HP LaserJet 1018 printer support site about the installation, see also:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=1814094&LC=en&cc=us&DLC=en&lang=en&cc=us

• HP Deskjet 2540: The printer does not work.

  My printer does not print the page, I am sinking.  Instead it tries to download a page that I tried to download a few days ago and he has yet to recognize the page.  It was an image of the Liberty Bell, so I assumed it was copyrighted and would allow me to print and I rejected the page.  Apparently he is stuck somewhere in the printer and it does not load and therefore does not allow me to print the page that I need now.  How can I get this thing off my storage or my printer?  I watched everything I know to review and check in the printer itself.  I do not know how to remove the application printing the page because I can't find in the computer anywhere.

  If you can help me, I would be very grateful

  Thank you

  Linda Schwartz

  Hi @lindaschwartz,

  Thank you for joining the HP Forums!

  I noticed your post on how you can not print with your printer HP Deskjet 2540. I'm happy to help you!

  Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this will solve your problem!

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think