Two sites, each site UC520

If I have two sites (main & distance - in the same city), both with a UC520 at each site, can I use the SIP trunks on the main site for incoming and outgoing calls to the remote site?  In other words, I have 2 DIDs.  I would like to assign a DID to ring located on the site main and second DID to ring located at the remote site.  Is this possible with dial peers custom and profiles of translation?

IPsec VPN will be established between the two sites.  I'll give you two sites with POTS as a backup in case of failure SIP or VPN.

Is there any sample configs that I can refer?


Well Yes, you can do it.  You go just to have a dial-peer that designates in the remote MAN at the CME HQ for PSTN numbers.  And conversely, you'll dial-peers on HW to repoint DIDs from the remote site to this device.

Tags: Cisco Support

Similar Questions

  • Web videos on two sites do not play

    I tried to watch videos on and ( has no problem), but have had no success on each site. On, I get a request to disable Ad-Block; I do, but I always get the request. On, the videos don't load not yet. When I contacted' technical assistance, they suggested to switch to Chrome. I can see the videos of these two sites with no problems, but I prefer not to have to switch browsers just to watch videos. Someone else has encountered this problem, and if so, what solution did you find. Note: one of the posts I read recommended to download and install a package of Microsoft; I tried half a dozen times, but could not get the package to download.

    The CBS and ABC use Flash. The notification plugin icon on the address bar? If this is not the case, some relevant websites can be blocked by NoScript. If you get the icon and Flash is allowed by you do not get the pre roll ads, the question could be NoScript or HTTPS Everywhere is perhaps not secure items are involved.

  • Replication between two sites with essential Kit more

    Hi all

    can anyone confirm that the following scenario is possible?

    A basic Kit Plus - replication - another essential Kit Plus
    3 Hosts                                                                      Other 3 Hosts

    In other words: is it possible to replicate virtual machines between two sites, each managed by a single essential Kit Plus (outside the bounds of the CV)?

    I'm sure that is correct, but I want to be sure.

    Thank you guys!


    Yes, you can use replication between vCenters thus vSphere. To do that you would like to devices VR is deployed to each vCenter and then connect them. How to do this is described in the VR installation and config and administrative documents.

    BTW, my name is GS.

    See you soon!

  • The development of two sites on a single machine

    I am fairly new to dreamweaver and Web design, and this problem came. I have two basic being development-mine sites and someone elses. Ive set the machine up as a test apache, php and mysql server.

    Y at - it a simple way to keep separate files and still be able to test them. If the two sites use php files, it seems that I have the mixed in the same root folder.

    I know developers full time must have a few construction sites at a time if wonderd what would be the solution.



    Monday, April 17, 2006 13:42:54-0400, "Murray * ACE."

    > Site 1 - Local folder = folder1, test = htdocs/Folder1, remote server
    > site = everything which
    > Site 2 - Local folder = folder2, test = htdocs/folder2, remote server
    > site = everything which

    Bah! What about include files that need links site root? Trust
    me on this one. Set up a virtual host for each site. See here for
    instructions on how to do it:


  • Two sites disappear as soon as they load into 32.0.3

    These two sites work well on previous versions of FF, IE and Safari. This a goes to an error message on the website saying to try again later. I did it several times. This a disappears about a second after it is loaded. Other sites seem to work OK on 32.0.3.

    Hi jackyhood, I agree that the software works in mysterious ways.

    When you run uninstall from Firefox, it asks if you want to remove data personal, which includes the historical record of parameters with bookmarks, etc.. Good thing you kept, otherwise there would be a lot of rebuilding to do. But if you had removed your personal information during this process, then when you have reinstalled Firefox, it would have been as a new user sees.

  • Two sites that I go to every day are not in a format of Web page on the screen.

    After the latest Mozilla update, there are two sites that I go to every day. These sites are not formatted in Web page format. For example, a site is my century e-mail account link. I can connect on e-mail, but the page that is displayed indicates and looks like a Microsoft Word document. The other Web site is my online banking Web site. No other site don't give me wrong.

    You can attach a screenshot?

    Use a type of compressed as PNG or JPG image to save the screenshot.

    Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

    • Hold SHIFT and click reload.
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (MAC)

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

    Also, make sure that your security (firewalls, anti-virus) software is blocking the files or modify response headers causing Firefox to get the pages as text/plain instead of text/html.

    You can check that in tools > Page Info > general and in the net Web Console log (Web Developer > Web Console;) CTRL + SHIFT + K).

  • Why two sites that I always go to load do not all of a sudden on one of my computers or web browsers!

    I live in the United States (Missouri) and I have: Chrome, Firefox and internet explore. The main browser I use is Chrome, not recently but earlier, two sites I want to go to ALL the time suddenly stopped working for me, so I asked a question on yahoo answers before, asking if the sites were working for someone else, they all said that the websites worked perfectly for them! Then someone gave me a link to a website called "down for everyone or just me? I typed in the two sites I tried to access it in the search bar, and of course he said "it's just you, the site is up" when I try to load these pages on google chrome, I get an error message exactly like this: "Oops!" "Google Chrome did not Try reloading: additional suggestions: access a copy cached Google search:" here is the other site: "Oops!" "Google Chrome did not Try reloading: additional suggestions: access a copy cached Google search:" and when I click on the grey globe on the left of the address bar, I get 3 notifications saying: 1: "the identity of this Web site has not been verified" 2: "your connection to the site is not encrypted" 3 : "You've never visited this site before today" how these 3 problems? That's what I get when I try to access the sites on Firefox now: server not found Firefox can't find the server at (Same message on fox trying to visit Check the address for typing errors, such as instead of if you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. When I click on the yellow triangle with an exclamation point in the Middle located in the browser search bar, it's notification it reads: "this website does not provide identity information" "your connection to this Web site is not encrypted" I know as I type these sites properly as I typed it in like a thousand times before! Y at - there anyone out there who can tell me what the * is going on with my sites? The work of course sites! I need these sites to work for me! I am trying to learn Japanese, and these sites are essential. More info: I recently restored my computer to factory settings (these problems two site began to arrive before that I have in mind the factory settings get you, even on the desktop these websites do not work.) Once I reset my laptop to factory settings, natures sites don't work! I have 60 days of protection antivirus Norton Anti (came with the factory restore), recently scanned, so I know I have no viruses. I already deleted my cache, re-installed Google chrome and firefox. Both sites still do not work. I use an HP laptop. Running Vista Home premium 32-bit. HP Desktop running windows 7 with windows or microsoft security databases (the one that it is supposed to be) not load not these two sites either. All other sites are working perfectly, there is no other site that I know, who does not work for me with the exception of these two sites. I also have a Linkys modem which I already reset. Can someone tell me what is happening and how to fix this please! I posted on the google forums and other places not always some answers! I tried firefox and internet Explorer, browsers still nothing with these two sites. And I think that it is on this subject, someone please get back to me as soon as possible! It totally sucks: \.


    • What version of Internet Explorer you are using?

    If you use Internet Explorer, you can check this link:

    Can't access some Web sites in Internet Explorer

  • Problem set up RV connection between two sites

    Dear all,

    I'm putting a replication for some virtual machines from the production site to a recovery site. The two sites are on ESXi with vCenter 5.5 5.5 with their own AD domains. The connection between them is done with customer VPN Cisco of DR site in Production site.

    I installed SRM 5.5.1 on two places and I was able to successfully combine the two sites. The State of them is CONNECTED on both sites. On both environments, I deployed unit of replication vsphere and that they are properly registered on the two vCenters.

    The problem is that when I try to configure the connection of VR, I get the following error:

    VRM Server generic error. Please see the documentation for troubleshooting information. The detailed exception is: '"HmsServiceInstance" thrown an unexpected exception "' with message '' when calling method of managed objects' getContent".

    I get this error from two different points.

    I can't do a ping on the two sites using the FULL domain name and I've tried the following article:

    VMware KB: Configuration to connect to the VR in VMware vCenter Site Recovery Manager server reports the error:' managed objectives...

    Could you please help me solve this problem.

    Thank you

    Aleksandar Aleksandrov


    In fact the two devices needs a connection between them as they periodically exchange messages for the two sites must be able to connect to vCenter Server port 80.

    Thank you


  • Why are there two sites Adobe Muse by Adobe?

    Why Adobe has two large Muse following Web sites:

    I spent the last month trying to find resources, help, all stuck extended tutorial in site 1 above. Just today, I found the second site above and it is with the help of google to search of muse... What's worse, is that there is no link to everything I could find between the two site. Web site 2 above seems to have much more info on Muse than site 1 above. They both seem to be managed by Adobe.

    I've always had difficulties to navigate the Adobe website and now I find stuff like above. Very frustrating. I can't conceive a reason why Adobe still do this. Nor have links with Adobe TV with muse tutorials... who knows what other pages of Adobe, under the aegis of Adobe, with help/tutorials/resources for Muse and other applications are 'hidden' where you have to use google to find web pages.

    I wish that Adobe affineraient their Web site... I love the apps, but the site looks such a mess and a hodgepodge of pages whose half seems that all break the link, but with the same information to the application.

    The Adobe website uses the same structure for all the product pages. With Muse being a relatively new product in the area of web design, the Muse team themselves have added their own website where they can add as many resources as they wish. It is not possible to add these resources on the main site.

    The second site is one you should use to Muse that the first is just the basic selling stuff.

  • After you rename a folder full of files using LR CC, I now have two of each DNG file with consecutive numbers providing unique names!

    After you rename a folder full of .dng and. MOV files using LR CC, I now have two of each file DNG image with consecutive numbers providing unique names. . MOV files are not affected. Activated with "Bridge" and found it said one is one Mac Application, either in the form of windows. I have Lightroom on Mac and Windows PC with local catalogues which are clouds synchronized (but never on at the same time). Could be the cause of this problem? It is possible that differ from the Mac and Windows version catalogs and their creative together via the Cloud technology synchronization can cause this duplication is obvious when all files are renamed by using a number of automatic sequence?

    Yes, my default sort criteria is by file name as my beginning of file names with a reverse date followed by a sequence number. I think at some stage I must have reproduced all the files on the Windows PC and saved with a different range of sequence numbers after the element of date filenames outside of LR. Sometime later I have imported in the Lightroom. When I decided to rename all of them using this naming convention, I discovered the duplication hiding behind different file names. This turns out to be a lesson on the practices of workflow systems.

  • You can import data field twice - need two of each person

    I'm a member of a club card. They want two cards by excellent field. So, if the line is John Smith, I need 2 cards with the news of John Smith, Jane Doe 2 and so on. I have 119 names and eventually need 238 merged fields. And before you tell me two print side up, it goes to a specialized card printer and they specified a file with 238 merged cards. Any advice appreciated on getting the data merge to do two of each row of data (name, your member number, active/inactive member). Thank you.

    Make sure you have facing pages not controlled in the document format.

  • Connectivity between two site to site VPN

    I have two remote sites that each connect to our main office using a site to site VPN. Remote offices have 831 routers. The main office has a PIX 515.

    A remote office is 192.168.15.X and the other is 192.168.100.X. The main office is on a 10.X.X.X network.

    Each remote office can contact the office with no problems. However, they cannot communicate with each other at all and I need this to work. I just want to be able to access the network 192.168.100.X network 192.168.15.X through the VPN tunnel that is already set up between each remote desktop.

    I tried to add the other network to the ACL for the tunnel, but that did not work. I feel I'm missing something simple.

    For example, the following ACL initially.

    Note access-list 103 IPSec rule

    access-list 103 allow ip

    I added this line to this LIST.

    access-list 103 allow ip

    But that did not help.

    Thanks in advance.


    What code are you running on the Pix. Talk to talk IPSEC connectivity is supported only in version 7.0 and higher.

    Enhanced support has spoke-to-Spoke VPN

    Version 7.0 (1) improving support communications a spoke-to-spoke (customer-to-customer) VPN, providing the ability to traffic to enter and exit the same interface. In addition, remote access to splitting tunnel connections can be completed on the external interface of the security apparatus, enabling traffic destined to the Internet for remote user VPN tunnels to leave on the same interface as it happened (after that the firewall rules have been applied).

    The same-security-traffic command permits traffic to enter and exit the same interface when it is used with the keyword a spoke-to-spoke VPN using intra-interface. For more information, see the section "Allows Intra-Interface traffic" in the in the command line Configuration Guide Cisco Security Appliance.

    Example of Configuration:

    Let me know if it helps.

    Kind regards


    * Please note all useful messages *.

  • Communication between two Sites


    I need help on this particular question.

    I have a client that wants to connect two rooms by a conference of Cisco, he already has tv monitors so he does not want to invest on the screens of Cisco, but he needs the codec with the camera for video meeting with the other site.

    He already has the CUCM, my question is:

    (1) do I need a license to add codecs to the CUCM?

    (2) is licensed for each necessary codec?

    Thanks in advance,

    Hi Andres,

    (1) Yes, you need to license telepresence room to add the codec.

    (2) each Codec would require licensed telepresence room.

    For example: in your case if you go with the SX10, you will need two license like you it will be deployed in the two rooms.

    Please note so useful.

    Kind regards

    Adarsh Chauhan

  • Two sites of finance not only loading login pages

    Before the latest updates Firefox loaded two Web sites without problems. Now site Colonial First State does not display a login page and the readings I have to update my browser. The Commonwealth Bank site lets connect me but will not open any account information. The Commonwealth bank helpdesk told me to use Google Chrome. I did and it works very well with both sites.


    Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

    (If you use it, switch to the default theme).

    • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

    Once you get the pop-up, simply select "" boot mode safe. "

    If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. It might help others who have the same problem.

    Thank you.

  • Can we have two site protected with unique restoration site?

    I have vCenter running in my site HQ (protected Site) and I have an another vCenter that is running the site of DR (Recovery Site),.

    I did my installation of SR in both sites and everything works without any problem,

    We have a new branch with a new vCenter and we want to protect this site, how can achieve us? We need to have a new installation of MIS on both Sites?

    In another can word you have 3 scenario SRM sites? or it will be a new SRM facility?

    Yes, you can have 2 protected sites and a unique restoration site. You will need a SRM server so many protected sites and 2 servers RS (one for each remote site).


    Site Recovery Manager 6.0 Documentation Center

    h ttp://

    If you are interested other topologies you can also see:

    Does that answer your questions?

Maybe you are looking for

  • iPhone 5 s backup using icloud

    I have a 5 s and want backiup to icloud. I am attached using my iphone for wifi friends.  As soon as I told backp now, it gives me a message that it can't back up now

  • How can I remove the links visited regularly, when I right click on Firefox in the taskbar?

    After you have installed the version that Firefox, I noticed that there are several new features.One of them opens up when you right click on a browser in the taskbar. You get a few options to open a new tab or new browsers. And a list of the regular

  • Alarm dialer in Toshiba\PCDiag\devlist.exe

    Hello I get an alert for the file C:\Program Files\TOSHIBA\PCDiag\devlist.exe (November 8, 2006, 17:29:06; 77824 bytes) This is a regular file toshiba or do I have to remove? Thanks a lot for all the answers

  • Turn on the video output TV 183 M70?

    My M70-183 has an ATI graphics card.I connect trough intakes the S - video TV, enter the ATI Setup screen, turn on the TV as a second video camera. I see on TV the background color of my office.When I click on 'identification' of the screen of the la

  • Compaq Presario CQ61 problem

    Good day to all, I have a problem with my compaq presario cq61. My unit does not start with the battery or even the power supply is connected. > I don't know that my diet is in good condition. The LED is on and it's output voltage. > I noticed someth