TX2-1020us digitizer cursor gets stuck 1cmx1cm of the upper left corner
I have a tx2-1020us
Sometimes, the stylus cursor takes over and gets stuck about 1cmx1cm from the upper left corner of the screen if the screen is 90 degrees or to move away it from the keyboard when you use it as a laptop. If less than 90 degrees, when this happens, it's somewhat usable but the slider still jumps at the skylight at random.
I've known as a locking of the keyboard once but removing the power and the battery it is resolved.
To troubleshoot, I ran the HP and N-trig utilities and they found no problem so even the question that happens. I downloaded the latest drivers from this site and install, I searched on Google and Asus seems to have a similar problem but I don't know if this applies. Sometimes, when I reboot it goes far, other times it is not. Deactivation of the first N-Trig driver stop the question but then of course, do not work the key features.
I installed the software (for most, MS Office, Corel PSP and NeatWorks) and installed a scanner NeatWorks and GPS MS on it since I bought it last Friday (not connected when it is the case).
Has anyone else seen this, they are of a resolution, I would stay before 15 days runs out?
Problem solved!
Turns, I have a desk lamp fluorescent light about 15 cm from the laptop.
When the lamp is on and the laptop is plugged in, it does the cursor thing erased. Unplug the laptop or move the lamp 25cm and everything works perfectly. Go figure.
Tags: Notebooks
Similar Questions
-
I wonder how do I get my status in lightroom to change mobile trial to be truly permanent. the lightroom icon 4 is always next to my lightroom icon 6 in doc. I bought the upgrade and did all the necessary steps as told to me by adobe.
Mobile Lightroom is a separate application that can be installed on your IOS or Android. This will allow you to create collections that can be shared in the cloud and edited on the mobile device. Lightroom Mobile is offered as a trial in Lightroom 6. You have 30 days to evaluate if he is a valuable asset for you. Your Mobile with Lightroom access will be terminated at the end of 30 days. It is only available for those who subscribe to the creative cloud. It has nothing to do with the program of office of Lightroom. If you are sure that you are not interested in using Lightroom Mobile you can click the identity plate and make a pause this feature, and I think that notification of the trial will stop at the display.
-
When I turn on my computer everything that happens is that I get a message on the upper left corner saying THAT NTLDR is missing, press control, alt, Delet to restart
Hi maryo'carroll.
· What is the full error message that you receive?
· Do you remember all the recent changes on the computer before the show?
· What is the number and the model of the computer?
· What is the service pack installed on the computer?
You can check the links below: year NTLDR or NTDETECT.COM not found error: http://support.microsoft.com/kb/555304
Windows may not start and you may receive an error message "NTLDR is missing" If Windows is not up-to-date and there are too many files in the root folder: http://support.microsoft.com/kb/320397
With regard to:
Samhrutha G S - Microsoft technical support.
-
My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.
have you tried to change the batteries in the mouse?
-
I have a Pavilion Notebook and recently caught the virus from file recovery. I bought and ran the disc of Trend Micro Titanium Maximum Security. Now, I get a black screen with a flashing cursor in the upper left corner of the screen. All tests ran for memory, hard disk, etc. are OK. Now I have a recovery disk, but have not backed up my files. Any suggestions?
Download your backed up files, then you can boot from your recovery disks to reinstall Windows.Several options to do so.
Remove the hard drive and attach it to one > USB adapter . Plug it into another computer via usb port and copy files off the power.
You can use > Ubuntu Live CD to boot from and backup files.
OR ->Kaspersky CD has the ability to back up files.
-
Need help! Does not start. Only get '_' in the upper left corner.
Hi, have the following computer:
HP-Pavilion model: KZ849AV-ABA s3500Z
Running: win 8.1 (32B) 2G ram
Have not had any problems I know, so far.
Run norton regularly, no problem.
Stop the machine to get out. Returned, tuned back on and now will not start.
It lights up, passes in front of the screen for "F9" "F11", etc.
Then crashes on startup with a single "_" in the upper left corner.
No beeps or error messages.
Have you tried several attempts to diff power off, unplug, etc.. Same results.
Have tried to interrupt the boot to make "diags", see the boot menu. Everything seems fine, from what I can tell.
Don't know what else to do.
As mentioned, saw no problem before that to my knowledge.
It helps the tight connections and no keyboard activity.
Possible victory 8.1 automatic update when the last stop arrived.
Recovery disks, I did several months ago when I upgraded to OS to win 8.1
But I don't want to go down that path and reload everything.
Any ideas how to check the boot sectors, chkdsk, etc.. ???
Thanks in advance,
Hi guys, thanks for all your comments.
I managed to understand.
I used the 'flash' player who made victory - 8.1 you create during the installation of win - 8.1 fresh.
It's like a recovery disk.
I started off of him and was able to use Diagnostics out of it to check the hard drive.
He said it was to fix hard drive errors, then restarted. Got the same new cursor. Then run this process again.
Got mesg diff on the correction of hard disk errors, please wait.
It restarted again and is came fine.
Several reboots confirm the problem disappeared.
I think that probably the hard drive boot sector becomes corrupted.
I'll keep and eye to it and document, we had this problem with the machine.
Will chose to replace the hard drive or buy a new machine. Which ever option the woman wants to take (his machine).
Thanks for your comments.
PS You forgot to mention that I disassembled the machine and cleaned carefully. Back together and restart with the same problem. Then I did the above stuff.
-
There is a little tab on the upper left corner of my browser window that says Firefox. I used to be able to hit that and have quick access to history, print etc. rather than working from the menu on the left three lines. How can I get that back?
Thank youIt has been replaced by the 3 lines on the side button. You can either use that (it's actually faster to access your frequently used objects) or customize Firefox How to make the new look of Firefox as the old Firefox
-
F 23 has a tab box in the upper left corner. I made the change of url to empty, but it's still there. How can I get rid of it for good? W7 Ultimate. There was no box in another version of FF.
Hello, apparently this option has been removed intentionally in preparation for a redesign of the browser which will land in firefox later this year. You can use the following extensions to work around this issue if: https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/
-
I lost this Firefox orange rectangular button that used to be in the upper left corner of my screen? How can I get that back?)
Most likely, you are showing the menu bar. Right-click on the toolbar area and uncheck the Menu bar - the Firefox button should appear. You can switch from one to the other.
-
How can I get rid of a printer name in the upper left corner of each page to print?
Hello
1 how long have you been faced with this problem?
2. What is the brand and model of the printer?
3. facing this problem even when printing via Notepad?I suggest you look for a setting in the printer software to solve this problem. or you can check the settings of the printer in order to remove the 'name of the printer.
Choose printing options
http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-optionsThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
I have a grid of cube on top of my document with a cube icon in the upper left corner, I can't access. How can I get rid of these?
With the help of the new CC Illustrator
Thank you.
Command shift I - Mac
Shift Ctrl I - Win
-
I'm having a problem with my lightroom. When I arrived to develop fashion a screen in white lettering appears in the upper left corner of my screen. I can't get out. It appears on each photo and file developing fashion but does not appear in the library mode. I can't make my pictures with that it helps...
Press the letter I have a couple of times. You can either have the displayed file permanently, temporarily displayed information or displays do not at all.
-
How can I get rid of the file name, date and size of the photo in the upper left corner of the module develop when I'm not working on the photos?
All shortcuts are listed on the view > menu Info Magnifier.
-
Get the position of the upper left corner?
Hey guys,.
by geometricBounds [1] and geometricBounds [0], I can get the starting positions of my objects.
In my case I need the position of the upper left corner. When you rotate an object, the geometricBounds always reflect a bounding box so that I can not get the desired coordinates.
How can I get the properties of the "points of departure" (the upper left corner of my object)?
Thank you very much!
You have entered the field coordination complex spaces here.
In short, you can use resolve() to find the anchor points on one
object. But you have to decide in what coordinate space to get the
results.
Your best bet is probably to use spread coordinates. The point 0,0
who is in the middle of spread.
So, given a pageItem i, try:
i.Resolve (AnchorPoint.TOP_LEFT_ANCHOR, CoordinateSpaces.SPREAD_COORDINATES);
If you want to deepen this topic, Marc Autret has a good guide PDF
on that.
Ariel
-
Today when I opened Firefox tab in the upper left menu was missing. ???
How to print without menu tab? How to restore the menu tab?See this - https://support.mozilla.org/en-US/kb/how-do-i-get-firefox-button
Maybe you are looking for
-
How about an app or a menu item to block annoying Reroute?
I continue to divert to a Web page asking me to install an upgrade to my flash drive. I know it it's a malware Distributor. How can I block this site! It's reactiveplayer.com. He wants to automatically load a malware program that is supposed to be ad
-
Controller USB is missing in the Device Manager list - how do I get it back?
After a recent update, I found that I could not see my USB/wrtieto. On the investigation, I found that the Universal Serial Bus controller does not appear in Device Manager. I tried to reinstall the system drivers, without success. I have nothin
-
What does the error code 0 x 80040154?
under w vista premium on a laptop Toshiba T5800 SP2. I can not back to work and I did remove it and restart more services.msc to start the VSS service and backup w and still no recovery. Also I am not able to download anything consequences. It goes r
-
Network sharing - cannot access local share of localhost on public IP - wrong password
Hello. I have a PC that has a shared folder. This PC (A) a public static IP 192.168.1.1. This (A) PC, I try to access \\192.168.1.1 and it works fine. This PC (A) has a public IP 1.2.3.4 (roads of firewall on the router on 192.168.1.1 points). I can
-
Salve a tutti Ho no problema con the stampante Che da some giorno per stampare una semplice page above to get a tempo di sacco Stampa molto molto lentamente my Cosa devo fare? Grazie in pre-empted