Type AutomationParameter conflict

Similar Questions

• Is it possible to type ApplicationMessage conflict?

  I'm a bit confused of some methods of ApplicationMessageFolderRegistry:

  void registerMessageIcon(int type, int status, ApplicationIcon icon) 
  Taking into account registers an icon for message type and status

  void registerMessageMenuItems(int type, int status, ApplicationMenuItem[] menuItems) 
  Records of the menu items for given message type and State.

  I wonder if my app saves message message icon type 0x1 and Status.INCOMING and then some another app it will record own icon message type 0 x 1 and status Status.INCOMING? How BlackBerry OS is responsible for this case? Will be another app overide my setting? It depends on the application startup command?

  Thank you

  Dima Kornilov - developer.

  each applicationmessagefolder is integrated separately, there may be several applications by registering at the same time.

  as you fill in the messageList you have total control over everything.

• error: conflicting types for 'myFunctionOne '.

  Hello

  The help page of LabWindows/CVI 2013 for C language Extensions seems to show the functions of overloading is supported in C99 extensions:

  ' Function overloading in C | Yes '.

  The same thing in the table in the following link:

  http://digital.NI.com/public.nsf/allkb/73AEAD30C8AF681A86257BBB0054A26B

  I tried to compile a source file with the following definitions of the function overloaded with C99 extensions enabled in the compilation Options:

  void myFunctionOne (double d) {}
  printf ("value = %f\n", d ");
  }

  void myFunctionOne (int d) {}
  printf ("value = %d\n", d ");
  }

  and I get the error:

  "types of conflict for"myFunctionOne"

  Overloading of functions is based really, and if so, how you allow it?

  Thank you
  Mark B.

  Hello Mark,

  You must add __attribute__ ((overloadable)) in the definitions of the functions you want to overload.

  Sub __attribute__ ((overloadable)) myFunctionOne (double d) {}
  
    printf ("value = %f\n", d ");
  
  }
  
  __attribute__ ((overloadable)) void myFunctionOne (int d) {}
  
    printf ("value = %d\n", d ");
  
  }

  You can see an example of extensions clang here.

  Constantin

• Resolve the conflict of data type of TestStand pragmatically in CVI

  Hello

  I'm porting a UI for the 2010 ICB/TestStand.  My problem with the badly planned spread data types defined custom.  While I can handle the MyTypes.ini and StationGlobals definitions, sequences that we are loading are originally the dialog box 'Type to the Type of conflict'.  The sequences that are loading have been created in previous versions of TestStand (3.1 and 4.0 for the most part).  The main reason why a 'conflict' is detected because the data types of the sequences can either have different indicators (for example, "modified") or updated dates.  The structure of the types are ALWAYS the same, so there is no danger by choosing the "wrong" data type  However, given that the "currently loaded" Type is one that "must" always be used, it would be great if the resolution could be resolved so that the operator never has to see the dialog box.  In our environment of manufacturing of these dialog boxes are considered errors.

  There are hundreds of files in sequence that could be affected.  The process to go through each of them individually and setting data types would be impractical (really, out of the question).

  I use TSUI_ApplicationMgrOpenSequenceFile() to open the sequence and can not find a way to settle the conflict resolution to automatically choose the "currently loaded.  Please let me know if there is a way to do it, and if so, provide an example.  Any other suggestions you might have would be welcome.

  Thank you

  JF

  (Either by the way - I meant "programmatically", not "pragmatic" in the subject heading)

  I tried your suggestion and I still get the dialog box when

• type definition and reference

  Hello

  When I look at the 'Use' in the opinion of Types column, I am fair to assume that the first location given for a type whose type is defined, all the others where it is referenced?

  Example:

  Use of Version of Type name

  OMS_StdQueueInput container, Type definition 0.0.0.4 OMS_Types.ini; OMS_LocalTypes.ini; OMSStart.seq no comment

  So here I guess, the type OMS_StdQueueInput is defined in OMS_Types.ini and used/referenced in OMS_LocalTypes.ini and OMSStart.seq. Is this correct?

  Kind regards

  Peter

  INI file do you mean a Palette Type TestStand file?

  A new feature has been added to TestStand (4.1, I think that Yes do it) which allows control of automatic conflict resolution cases (choose the most recent version of a type in silence). The setting is located under the tab file from the dialog box Options of Station and is called "allow automatic Type Conflict Resolution." In general, I recommend to change for a bit more restrictive setting 'Only if a Type Palette File a higher Version' because that will get rid of the possibility of automatic fix of conflict at the opening of two files in sequence with different versions of a type when the type does not exist in a file of type palette. But if your type will always be in a file of pallet type then the default is fine.

  First of all, some basic information.

  Type automatic conflict resolution - this occurs when a file is opened, whose type is different from the version already loaded into memory, and the auto resolution criteria is met (i.e. the station allows it, or verison of the type is marked as modified, and versions of the type as the different version numbers). In case of automatic fix TestStand automatically selects the version of the type with the higher version number.

  I would like to know if you want to explain otherwise.

  What I recommend for the management of the types:

  (1) create a palette file type for your standard types. Make sure all efforts and development systems are using the / load this file type of pallet. If you need more information on how to do it please let us know.

  (2) control updates to these types by using a source code control system to control the update of the files palette type. Ideally, one person should be modifying a palette file type at a time. Source code control systems can be used to enforce this.

  (3) let your developers know that they must only edit types in the type palette files and not in the files of each sequence.

  (4) try to make any changes to your types and substep code backward compatible so that the old sequences will continue to work with newer versions of the types. If you break backward compatibility, consider instead to create a new type and use the new type in the future, but the old guy to let backwards compatibility (you can use flags to hide the old version of the types in the Insert menu, if necessary).

  If you are using a palette file type in this way, I think you'll get something close to what you're asking. The default setting for "allow automatic Type Conflict Resolution ', if all your systems of TestStand charge your standard type palette files then you will get the version in the type palette file or your will get a dialogue of the type of conflict if the version in the movie file is more recent. There will be no possibility of silently using one version other than the one in the type palette file. Is it enough for your needs, or you are looking for something different. If you are looking for something different, please let us know the specific behavior that you need.

  Hope this helps,

  -Doug

• Deployment w / Type custom (CommonResults)

  OK, first of all, I admit I'm not an expert when it comes to Types or even their deployment... where the issue. I'm looking for a recommended way to handle the situation I have.

  Situation: I have test sequences with a change to CommonResults. We put a Boolean variable to 'IncludeInProductionLog '. I expect to see this property on all steps in the sequence. I have the sequence initially registered in TS 4.1 / LV 8.6 and now I'm upgraded to TS 2013 SP1 / LV 2013 SP1. It seems that, before developers (not me) had replaced the pallets of Type on our development machine as this type was standard on the computer. Now, when I open it on a new machine, I get a Type conflict (no surprise here). I have the option to use the Type of the sequence (the one that I want) or use the Type currently loaded into memory (by default installed w / TS).

  So I select load the Type from the file in the sequence. Cool, looks good, but my ParallelModel.seq / NI_DatabaseTypes.ini / NI_FlowControl.ini /.../NI_Types.ini all have the sign (*) next to them as if they have been updated and should be saved. Of course, I get that I changed the types in memory and therefore these pallets Type / ProcessModel everyone thinks that they have been updated. More on that later.

  I plan on deployment (Deployment TestStand) my sequence of about 10 machines, all new w / TS new installs. I don't want to go through and update all the pallets of Type / type of conflict dialog boxes that come with this. I'm looking for how to deploy either my Type Palletes, save this CommonResults in MyTypes.ini or something that I can just deploy the CommonResult Type updated and I can't go through all the headaches of type conflicts.

  I tried the things:

  I've been good analysis that the documentation (I try to RTFM when I can) and he talks about versioning of Types and have it select the latest version. Updated my type of sequence to 5.2.0.0 (old version was 5.1.0.0) but I still get the same type conflict.

  I know that the Type of TestStand differ is there, but once again, without really understanding what I'm doing and eager to have this "get" just with my deployment, I'm looking for other options.

  What I need:

  It is quite simple, just do not have the conflicts of Type, don't want the user to have to save all Types or ProcessModel and I don't care even to maintain the types of origin on these systems. I'm happy to just replace. Just want to make sure I'm on the subject with "best practices" in mind.

  Sorry for the long post... any recommendations would be useful. Thanks in advance!

  I recommend that you update all files of type palette to have the latest version of your type of CommonResults and re-record the (you may need to run teststand "as Administrator" when you do this because the files are in the directory program files and therefore are not writable by default on newer operating systems). You must then make sure you install those in the \Components\TypePalettes directory on your target computers, overwriting those installed there by default. Which will get rid of type conflicts, you see.

  When you open files from existing sequence they will be marked as modified if they were not already using your version of CommonResults, but you don't necessarily have to resave all since they get converted back to use your CommonResults type whenever they are responsible since the type is in the type palette files, but if you want to get rid of the brand of change you need to re-register the. You can use the tool "Sequence update files... "in the sequence editor to re-record them all at once.

  In the future, you can consider using the 'Other results' feature more recent, or adding an attribute to the result object of a step use CommonResults instead. They have not the same problems with the type of conflict and change file because they have now a custom data type used by all the steps.

  Hope this helps,

  -Doug

• Problems with typedef uInt32 and NI Vision

  Hello

  I'm having a small problem my request against the headers provided by NI Vision acquisition 15.0 and CVI 2012SP1 of construction.  The problem seems to be contradictory typedefs in the files of headers associated with the types of 'SESSION_ID' and 'uInt32 '.  In NIIMAQdx.h, it is the following:

  #ifndef _NI_uInt32_DEFINED_
  #define _NI_uInt32_DEFINED_
  #if defined (_MSC_VER)
  typedef unsigned long uInt32;
  #else
  typedef unsigned int uInt32;
  #endif
  #endif

  Now, _MSC_VER is not defined, so we get defined as an unsigned int uInt32.  In niimaq.h there is:

  #ifndef _NI_uInt32_DEFINED_
  #define _NI_uInt32_DEFINED_
  #if defined (_MSC_VER)
  typedef unsigned long uInt32;
  #elif __GNUC__
  #if __x86_64__
  typedef unsigned int uInt32;
  #else
  typedef unsigned long uInt32;
  #endif
  #endif
  #endif

  Which neither _MSC_VER or __GNUC__ being defined, does nothing except set _NI_uInt32_DEFINED_ who prevernts to be set by another heading.  niimaq.h also has this in it:

  typedef uInt32 id_interface;
  typedef uInt32 SESSION_ID;
  typedef uInt32 EVENT_ID.
  typedef uInt32 PULSE_ID;
  typedef uInt32 BUFLIST_ID;
  typedef Int32 IMG_ERR;
  typedef uInt16 IMG_SYNC;
  typedef uInt32 GUIHNDL;

  This means that, by itself, a module which includes niimaq.h build because uInt32 never gets defined.  You can include NIIMAQdx.h in front of her then she cand defrine uInt32 (as an unsigned int), that works, except that nivision.h has this line int he:

  typedef unsigned long SESSION_ID;

  Yet once they do compile due to the conflicting types (unsigned int versus long unsigned).  It seems that there is no way to include niimaq.h, nivision.h and NIIMAQdx.h in the same .c file, regardless of the order, without certain types of conflicts or unknown.  Comparison of return to an older version (3.9.1), I see in NIMAQdx.h,

  #ifndef _NI_uInt32_DEFINED_
  #define _NI_uInt32_DEFINED_
  typedef unsigned long uInt32;
  #endif

  Which is nice and simple.  niimaq.h also has the same code in it too much OR-IMAQ 4.6.1.  Does this mean that I can "fix" it by defining _MSC_VER, indeed put

  #define _MSC_VER 1300

  At the top of my .c file gets in effect of things to build, but I'm wary to do this because I know there are other things that seem out of it.

  Any ideas or is the solution to restore an older version of the Acquisition of the Vision?  Thank you.

  Hi Tanner!, thanks for the reply.  I use the Debug, not 32-bit mode.  The code example you provided does not build in my configuration.  The problem is this code in niimaq.h

  typedef uInt32 id_interface;
  typedef uInt32 SESSION_ID;
  typedef uInt32 EVENT_ID.
  typedef uInt32 PULSE_ID;
  typedef uInt32 BUFLIST_ID;
  typedef Int32 IMG_ERR;
  typedef uInt16 IMG_SYNC;
  typedef uInt32 GUIHNDL;

  And the reason is that an Int32 and uInt32 are not defined (although uInt16 is defined).  On another PC with NI Vision 2009 installed it relies very well, but it does not work on this PC with IMAQ 15.0.

  Play with it, I think the problem is that CVI 2012 SP1 isn't definition _MSC_VER or __GNUC__, whereas CVI 2013SP1 __GNUC__ defined as 4 (and indefinite _MSC_VER leaves).  As __GNUC__ is defined, then in niimaq.h, uInt32 is defined as unsigned long (for 32 bit), and all is happy with CVI 2013, so the problem seems to be related to the combination of the ICB 2012 and versions more recent the IMAQ.

• Display driver igfx has stopped responding, but has recovered, blue screen with a Bcc Code of 117.

  Original title: igfx display driver

  I keep getting a message "the igfx display driver has stopped responding but has recovered.  A few times, it goes to a blue screen.  I'm not playing games when that happens.  My history of problem says it is a LiveKernelEvent with a Bcc Code of 117.  It began in May 2010 and continues.  I checked my driver and it is updated, or so it is said.  There must be some type of conflict.  All solutions?

  This might work, keep in mind this is a templete response

  Problem: something which called TDR auditor monitors for computer hardware, particularly the GPU, is tell the GPU constantly meet with computer for 2 seconds checker TDR restarts the driver. The TDR auditor has been good on paper but does not work in the real world. as a gpu may stop responding when he works hard.

  Issue since the time of vista, this is why this problem virually never happened on XP

  Here is the solution
  Exit all Windows-based programs.
  Click Start, type regedit in the search box, and then double-click regedit.exe from the above results. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002 (sometimes called ControlSet001) \Control\GraphicsDrivers

  On the Edit menu, click New, and then select the following registry value in the menu drop-down specific to your version of Windows (32-bit or 64-bit):

  For 32-bit Windows
  Select DWORD (32-bit) value.
  Type TdrDelay as the name, and then press ENTER.
  Double-click on TdrDelay and add 8 to the value data and click OK.

  For 64-bit Windows

  Select QWORD (64-bit) value.
  Type TdrDelay as the name, and then press ENTER.
  Double-click on TdrDelay and add 8 to the value data and click OK.

  Close the registry editor, and then restart your computer for the changes to take effect.

  This puts a delay on the auditor of tdr of 8 seconds, so the gpu may stop responding for 10 seconds, this usually fixes the problem, if you are still suffering from this problem (after a reinstall of the drivers or updates, you know this annoying driver stuff)
  To do this, do the same thing but instead of the 'TdrDelay' 'TdrLevel' type, enter the value data as 0 (it is on natively, but check) and then delete the TdrDelay.

  Restart

  Which turns off completely Tdr checker, so windows now 7/vista/8 now works more like windows XP

  Share the info XD

• Wi - Fi and network suddenly stopped... Local only (Vista).

  I basically solved my problem. I'm writing this in case someone else has this problem.  (I was without any networking capability for about a month after a failure and request Windows update several uninstals due to a malfunction stopped responding - don't know if any of these are related?)  The computer couldn't even * is * on the network.

  First, I eliminated material as being the cause.  My suspicion is that a firewall was still in force, even if I completely uninstalled my Antivirus and disabled the Windows Firewall already.  Then I tried to disable the Base filtering engine (the "Services"), and * voila! * all returned.  I immediately installed a temporary, caught up firewall on Windows Update and reinstalled my Antivirus.  Everything's fine now, as long as I keep the Base filtering engine.  Rebooting it stops all the networks again.  I don't know if there are risks to let off, but for now, I'm happy.

  ******************************************************************

  Sorry if it's verbose.  I was no longer able to use networks of any type for about 3 weeks on my laptop Vista Home Basic.  Are wired and wireless down (I use different routers to a cable and Wi - Fi), while my Office XP continues work as a champion using a router.

  Everything had been working fine for a year or more until what all of a sudden stop.

  I also can't connect to the network wirelessly at my school more (it is a laptop).

  (Note that I am not currently under any additional firewall beyond the Windows Firewall).

  Three concurrent problems occurred at the time of the failure which could be related.

  (1) I tried an uninstall of the interface software LegoMindstorms NXT after a school project.  Uninstalling shifted on for about an hour and has stopped responding.  I did a system restore and repeated the uninstall.

  (2) I noticed the 'auto-protect active"icon of Symantec AV was changed to"disabled", even if I was not disabled it and my license is up to date.  In the settings menu, I unchecked and recontroler the auto-protect of selection, but it didn't fix it.  I tried to uninstall it, and it stopped responding as well.  I did a restore and another attempt to uninstall succeeded.  Windows Firewall and defender will have to do for now.  (I'll be reinstalling my AV soon and will get updates when I am able to connect again).

  (3) I reviewed my recent Windows updates installed and found the last (KB982536) has a status marked "failed".  I uninstalled that before that failed just to see if she had caused the next update not working, but it does not solve the problem.

  * I tried several system restores, but none have set.

  I also did the following:

  tried another ethernet cable
  * removed wired and wireless cards from the Device Manager, rebooted and (allowed them to reinstall)
  * updated to the latest version of the NETWORK adapter driver by using my other computer (XP) and the copy of the USB
  * sfc/scannow
  * checking memory
  * chkdsk
  * netsh int ip reset
  * netsh int ip reset c:\resetlog.txt
  * netsh int Reinitialis
  * netsh winsock reset
  * netsh winsock reset catalog
  * netsh interface tcp set global autotuninglevel = disabled
  * ipconfig/flushdns
  * nbstat - r
  * nbstat - rr
  * Microsoft Fixit "Dotnet" cleaning tool for Vista (copied from USB)
  * Micorsoft Fixit "50357: cannot get an IP addy" (copied from USB) - has attempted but * is not * run
  Tried to IPv6 without commitment, but has not helped - I finally put back it

  ---------------------------------
  Results of the ipconfig/all command
  ---------------------------------

  Windows IP configuration

  Name of the host...: Ethos
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8139/810 x Family Fast Ethernet NIC
  Physical address.... : 00-16-D4-A5-9B-7E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::815e:ad3e:e462:4e77% 17 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.78.119 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 452990676
  DHCPv6 DUID customer...: 00-01-00-01-0D-71-D8-8B-00-16-D4-A5-9B-7E
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Wireless Network Connection 2 wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 802. 11b / g WLAN #2
  Physical address.... : 00-1A-73-0F-EB-C9
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::2e:baf9:726c:defb % 15 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.222.251 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 268442227
  DHCPv6 DUID customer...: 00-01-00-01-0D-71-D8-8B-00-16-D4-A5-9B-7E
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {6A632B82-93D2-45ED-8829-3B6C5DF2C50F}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {5ECD7A6B-D36C-4179-9928-D56EFA36F365}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 10:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Card 6TO4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  ---------------------------------

  (An upgrade to Windows 7 can solve the problem, but this isn't an option I will consider for now.)

  Your settings do not look correct to me.  There is no default gateway (which alone explains why you can't connect).  Good number of other entries look right either (they are different, that I'm used to seeing).

  I suggest you remove all your network connections (remove them all) and start from scratch.  Configuration of the LAN connection, and when you get this work then set up the internet connection and get this to work.  Do not re - install connections, you do not need more (it seems that you have a good number of people).  You have tried to repair these connections and there may be something wrong with them which cannot be repaired (they can be corrupted or some type of conflict or other).  Starting with a network connection fees registration with nothing (not wired or wireless) and do everything as if it was a new machine can solve the problem.  Make sure you know the correct settings before deleting the current connections (and make sure that they are correct even if you need to contact your ISP for confirmation).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Slow scan by Windows Defender

  Information system: Intel Core Duo CPU E6750 @ 2.66 GHz, 4 GB Ram

  2 HDD to 500 GB to 1.5 (1.0 + 500 GB) to empty, 32-bit of Windows Vista untimate

  ...............................................................................................................................

  Windows Defender has been scanning hard drives for more than 29 hours, verification of objects a little less of 2 mio. It is not yet ready with the scan. Is this normal?  How can I speed up the pocess?  No other CPU intense application were aired at the same time. Said passerby-supported CPU is 0 to 5% and Ram-occupation is 65%

  Windows Defender adds security in combination with Zone Alarm Extreme Security, or do I stop using Defender?

  Thanks for any helpful input

  Can I Defender takes MUCH too long - this is not normal in any way.  I would cancel the scan, reboot and then try again.  Try to do a HARD drive at a time and I would like to disable ZoneAlarm in the analysis to ensure that the delay is not a type of conflict between programs (maybe the other was a scan at the same time).

  If the same thing happens again, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Zone Alarm according to literature what do advocate; As he did not disable Defender during installation, however, there is no reason to disable Defender yourself.  It will provide an extra layer of protection.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista keeps close unexpectedly.

  original title: Vista keeps stop unexpectedly. Have reinstalled Vista, checked for viruses and malware/spyware and reinstall the memory, still no luck.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: have reinstalled Vista, checked for virus and malware/spyware and reinstall the memory, still no luck

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you reinstalled Vista, chances are good, that it is not a software but a hardware problem.  It could be overheating (any part of the computer is too hot to the touch for a long time) caused by the fan doesn't work does not correctly or clogged inlet and/or exhaust - you should check it and clean if it's a problem with a can air or possibly replacement fan or power set.  It could be also problems with the hard drive, motherboard, processor (too much, it can overheat and they sell small fans for them which can sometimes fix this), perhaps, but probably not RAM or even another device that causes some type of conflict - perhaps even something as simple as a bad connection tight so check connections to make sure that they are all well know a lot about.  The following can help you diagnose a hardware problem:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  If you have spare parts that work from another computer trying to Exchange out them to see if you can identify the source of the problem (but be sure to check that they are compatible and that you install the appropriate drivers for them - otherwise you may cause more damage that may already exist).

  If this does not help or if this level of troubleshooting is out of your reach (these skills require experience, education, or not many people are trained and you do not want to cause any damage by guessing or trying things where you don't know what you're doing), then I recommend you take the system at a reputable computer repair workshop (NO Geek Squad or anywhere like that but one true professional) or return it to the manufacturer for repair, repair or replacement.  Compare costs, guarantees, reputations, parts availability, timing, effort required on your part, and any other factor consider you important and make your choice.  I recommend a full backup before sending or bringing as there is a good chance the drive will be wiped clean during their troubleshooting process.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• OfficeJet 6700 problem - impossible double-sided A5

  Hello

  I bought a HP OfficeJet 6700 Premium and I want A5 double sided cards but I can't do.

  If I put the page by default A5 and nec print on both sides, either short or long the coast, I get an error on 'conflicting settings. Print on both sides works no problem for A4.

  I had a quick glance in the manual and it says it does duplex for A5. I installed the latest all-in-one driver and firmware.

  Is there something obvious that I'm missing? Do I need a specific tray (just take the bac A4) or duplexer?

  Any help appreciated,

  Patrick

  Patrick, I've reproduced that you do it myself and found that you have reason, manual, in this case has incorrect information. I'll be sure that information is shared with the appropriate people to verify this. For A5 paper, with duplex, the only right now available option is manual.

  However, I will also check the regional settings and see if the metric of this document type of conflict with the region including the printer is zoned for. As a follow-up, where was the printer purchased and where are you now?

  Let me know!

• Only 1.6 GB of RAM comes in the "usable" name, the rest is "system reserved."

  I'm working on a Compaq Presario CQ57 laptop. I chose to move the RAM from 2 GB to 4 and it shows more than 1.6 GB as "usable". Before the upgrade, I just put the .4GB up to the shared video memory or something, but being not not be able to use more than half of what I installed is just ridiculous. I checked that box to a check in 'msconfig' is unchecked and also checked that there are no parameters pertaining to it in the ill-defined and also updated BIOS update BIOS, but I'm still having the same problem.

  Any ideas?

  Thank you.

  AHA! I thought about it. In a ditch last attempt to repair the computer, I have reset the BIOS settings and that fixed the problem immediately. I swear to you that I have sifted through these settings more that once and never saw all the options type of conflict, but it works now. Good luck to anyone else having this problem. ::

• Remote Desktop error

  I get the error "the remote session was disconnected because the client access license remote desktop has been changed" stored on this computer when you try to connect to a computer server 2003.  I am running Windows 7, but have no problem connecting to two other computers on Server 2003 or XP.  He seems to have some type of conflict with this specific computer and Windows 7.  I can connect to this server from XP machine.

  Hi Russ,

  First, I suggest to create a system manually, Restore Point so that in this case, a problem occurs when executing these steps, you can always perform a system restore and go back.

  Normally we get this error message if the TS License on your computer is damaged or corrupted, you may need to remove the TS client. The license is stored in the registry of the client.

  1. click on start
  2. in the start search box type REGEDIT and press to enter.
  3. in the Registry Editor go to the following key: HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing.

  To clean the client license cache, just delete this key and keys of void. The next time the client connects to the server, it will get another license.

  Registry warning:

  Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow these steps in the KB Article: http://support.microsoft.com/kb/322756/

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 8100 - can't activate the draft Mode.

  Hi, I bought a HP 8100 Pro printer a few weeks ago and I can't try to activate the "Draft" mode with it.

  When I try to activate the draft mode I and get an error of type message conflict.

  I am running Windows 7 and the HP is connected via a USB cable.

  Does anyone know what I need to do in order to print in the project?

  Thank you.

  Rick.

  

  Well, I have not installed the software yet, but after looking at your screenshots that I came up with an idea and the bear with me, after all, it's just an idea, it cannot be the solution.

  We will select plain paper, uncheck the Custom box, choose Project then select Custom and check that the paper is still paper, if it is not try it back. Then try to select the quick project in advanced settings.

  I notice that the parameter that you currently have is best, I wonder if it is maybe what is in conflict with the output quality.

  Let me know weather this fixes the problem or not, if not I'll install the software and get this figured out for you.