typedef and strict typedef control server vi LV 2011 reference number

Similar Questions

• TypeDef/control of the load of a road fixed

  Hi all

  I tried to search but could not find this topic. But I doubt if it has not already, examined in the forum of LabVIEW.

  In my application, I used custom controls. The application has several "pieces" and each of them uses "similar" (but not necessary even) TypeDef controls that I customized to sequel of the game.

  Good feature of LabVIEW is that even if the control file is moved to a different path, he finds and charge it, with a warning. However, in my case, I need to disable this feature for some control files. Is this possible?

  I use files from control with the same name, but they are planned for different screws 'call' If this is not a good practice, I can change the names of each control file, adding a prefix/suffix to the name of the calling application. Each control file becomes unique.

  But still, this will remain a question. Due to small and appropriate names, I often prefer them with a 'typical' name I would give for such control. As in every application, we have a program of 'hand '. And what I faced, the problem is when I loaded a VI, he 'used' automatically control (bearing the same name as one who waits for this VI) which is already loaded (in a way) by an already open another VI, even if the intended control exist in the expected location. He showed a warning, but did not ask "do you want to load the original, or use the one in the memory?

  My question is, is it possible to have a "projected" pathname to be fixed and does not have the VI load the 'recently' opened 'namesake' control under his control expected?

  The feature is good, but in some cases, can shut down us or not?

  Vaibhav says:

  Thanks for the comment Mark!

  Yes, it's true.

  But what about stop unwanted connections of messsing upward in the first place the program? I mean, before you build a project.

  Moreover, if we open a program via the Project Explorer, it would still not allow to open a file whose twin brother is already in the memory. But will it scream before assuming a new connection on its own?

  No, the projects work like libraries. Once you have the screw in a project of his name is modified internally, or least how to locate the disk which allows you to open both projects at the same time. The trick here is to get the job done through projects rather than opening the screw directly. As long as you work through the projects themselves, you can use two screws or different typedefs bearing the same name located in different directories at the same time. It's as long as each of them is a member of another project.

• Cannot display all of the databases in SQL Server 2012 when using CONTROL SERVER permission on user

  Hello

  I'm testing the implementation of a user who has the CONTROL SERVER permission.

  I created a database MYDB with my sysadmn account.

  I have the connection with another say TESTUSER user account (this is a SQL login) who received the CONTROL SERVER permission only.

  The TESTUSER can see the MYDB database in SSMS.

  The TESTUSER Gets a message when you try to view the tables in the MYDB pressing the sign +. :

  "The MYDB database is not accessible.

  If I try to do a right-click on the MYDB database, I get the following:

  'User has not authorized to perform this action... ". Error 297 "

  Even if I GRANT the ALTER ANY DATABASE the TESUSER permission TESTUSER still gets this error?

  I thought that CONTROL SERVER permission would allow a user to see all databases even those that the user does not have?

  So does the same for the ALTER ANY DATABASE permission?

  Is this a bug or am I missing something?

  Thank you

  DOM

  DOM

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Access control server - CASE

  Access control server - CASE

  Hi people,

  I have my doubts on the access control server and NAC - clean access server.

  The CASE of the NAC can do the job of the ACS?

  In my scenario, it acts as VMPS server, AAA server, or RADIUS server.

  Can someone help me?

  Thank you!

  Hi friend

  ACS is entirely different than the clean access server. See the below url for more details.

  http://www.Cisco.com/en/us/products/ps6128/products_qanda_item0900aecd803be813.shtml

  If it helps, please note or answering another question.

  Kind regards

  Rafael Lanna

• Installation of database 12.1.0.1 and EM Cloud Control

  Hello

  I installed Oracle 12.1.0.1 for Windows 64. Database and the work of the MS Express. Next i tried to install the cloud EM 12.1.0.1 control, but there are errors during the installation process on the repository. EM 12.1.0.1 not does support Oracle Database 12.1.0.1?

  I use EM 12.1.0.3 with database 12.1.0.1 instead? What combination works for Windows?

  Is a virtual machine, including 12 c database and EM Cloud Control available for download?

  Best regards

  Eli

  Hi Eli,

  Monitoring is done by plugins (on the side of the agent). You can download in EM Cloud Control, (if the server can connect to Oracle if not you can use the method in offline mode) and deploy the necessary plugin (plugin 12.1.0.4 database) to the agent.

  See Enterprise Manager Cloud control 12 c: deploy a Plugin - YouTube

  and http://docs.oracle.com/cd/E24628_01/relnotes.121/e39348/toc.htm (DB 12.1.0.4 plugin release notes)

  On the virtual machine: I think it's a race (so compleet) VM, meaning that it is a CMS and a repository. You could add targets yourself. This can be one on another virtual machine, but it is to you what you want to do.

  Eric

• RoboHelp6 and TFS Version control - how to load and records local syncronize team members

  My team is using RoboHelp6 and Version control on TFS (Microsoft Visual Studio 2008 Team Explorer and Source Control Explorer).  We are looking for the right way to load a new project and the right way to get the team in harmony with the project. The process we have used to date is as follows:

  The head of the team takes the existing project and load into a local folder that is the local folder to be used by the control of Source of TFS. The head of the team opens the project through RoboHelp and then made a backup of all and generates a main page layout. The Leqader team uses then add it to Source code control option to add the project of TFS Source control. The members of the team and then create a local folder for use with the control of Source of TFS and team leader sends a complete project of its local folder and which is copied to the local folder. Member of the team then open RoboHelp and using Version control options to bind TFS (Team Foundation Server) and the Source code control folder where the project is located. The team members should now be able to edit the project.

  If I missed a step or a step added by mistake, please advise.

  Bob (no relation to John)

  Hi Bob.

  With RSC, there are a couple of tweaks to the procedure, as follows. TFS may work the same way.

  Before the authors try to open the project, they should make their initial connection to the db by RSC. All they need do is open the RSC Explorer, connect to the project and then close RSC. After that, they should be able to simply open the project in HR and have it connect on its own. (When they start with a copy of the project files, it does this a little simpler words. The project will immediately try to make the connection to source control).

  G

• & quot; Click here to activate and use this control & quot;

  I have a few animated flash buttons on my web page and they used to work properly. However, recently I am getting an error of Explorer 6 sp 2. When I rollover the text, I get a rectangle around the text, and a message that says "click to activate and use this control". I don't get the same error with Firefox. I mucked with the security settings, but if anyone knows just--I'm tired and want the answer.
  Signed,
  Stay - home-mother who used to be a geek!

  It is not strictly an error message. This is the new feature of IE
  (presented in the Update April 2006 for IE6) to comply with a decision
  against the Microsoft patent infringement.

  It is raised by the

• MBP and Hercules DJ Control Air with El Capitan

  My son has this Panel DJ Hercules, which he uses when children have a part here at home. He has used successfully in the past on the MBP with the Mavericks, Yosemite, and he wants to work again with his next birthday. I have not yet found anything ito compatibility or incompatibility with El Capitan.

  Before this specific MBP is updated to El Capitan, I would be grateful if anyone has had experience with the combination configured as such.

  Leo

  MBP 8 6.2 GB RAM 256GB SSD with OS X 10.10.5 and Hercules DJ Control AIR

  Hello Leopardus,

  Thank you for using communities of Apple Support.

  According to the pilot of the Hercules DJControl Air download page, they currently support the latest version of OS X, 10.11.

  https://support.Hercules.com/en/product/djcontrolair-en/

  If you have further questions about this product, then I suggest that get you in contact with their support team.

  https://support.Hercules.com/en/contact-en/?p=DJControl%20AIR

  Take care.

• Satellite X 200 - 15 K and problem remote control

  I installed windows 7 x 64 on my x 200-15 k and the remote control does not work.
  I installed a few irda drivers found on the download page of Toshiba X 200, but still nothing, and it does not show any device irda in device manager...

  Is - this remote controller only for windows Vista (originally on my computer when I bought)?

  Thank you
  Milos

  > I installed some drivers irda...
  Sorry, but you cannot use some drivers and later wonder if the remote control will not work correctly.
  I checked the Toshiba download page and drivers Win7 for Satellite X 200 PSPB9E are not available.

  So when you have appropriate Win7 drivers, we can discuss about the functionality of remote under Win7.
  All you can do now is to test it with the drivers for the 64 bit version of Vista and hope it will work...

• Satellite A300D and ExpressCard Remote control

  Hello guys,.

  I own a Satellite A300D-135, y at - it an available for this model remote control? I'm looking for a remote control that fits in ExpressCard location as some HP models have.
  I looked at several Dutch hardware well known, but I can't find a remote that fits the ExpressCard location.
  I give many presentations and therefore use my laptop a lot. I would like to have a remote control that fits in ExpressCard location because that saves space and a remote control of such a size is easy to "hide" in your hand.

  Kind regards
  Hunterseaker

  As much as I know Toshiba doesn t offers remote control for this model of laptop. The question is whether a third party product is available on the market.
  To be honest I have no interest in something like that, but I just want to recommend you to visit the web page of Logitech. They have so many products for PCs and laptops. Maybe they have a solution for the remote control that you can use with your laptop.

  If you can find some interesting product please post the link.

  Good luck!

• Fingerprints and the remote control supported on Satellite P100-387

  P100-387 has a fingerprint and the remote? Please, someone answer me.
  Thank you.

  Hello

  To my knowledge, the Satellite P100-387 does not support the fingerprint reader and is not supplied with the remote control.
  But you're right.
  The fingerprints and the remote control are optional and some laptops in the P100 series support fingerprint reader and are delivered with command remotely.

  I also found this site with P100-387 material specifications:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=120514#0

• LabVIEW TCP/IP Client and server, I need to send commands and receive comments side server from the client regarding the command sent.

  Hi all

  I can configure my two PCs, one as a client and a server very well. I am able to send commands from the server to the client. However, I am trying to determine how I can get feedback from the client to the server that something has changed, or a CQI that the command has been received. How I can do this in LabVIEW with the box to TCP/IP tools, or is there a better way to do it?

  Thanks for your help!

  Best regards

  -Gmac

  Once the connection is established, TCP does not care which end is the 'server' and the 'customer '. Data can be sent in both directions using the same read and write functions. So, if you are already able to send data to the client and read on the server, you should be able to do the same to send data from the server to the client, using the same TCP connection.

  If this is not clear, please your postal code so that we can provide more specific advice.

• What is the interaction between appellant VIs and subVIs using VI Server?

  I am student at the CLAD and one of the lines in the document preparation or here is the following:

  What is the interaction between appellant VIs and subVIs using VI Server?

  I know how to use the function "Call for reference" to call a VI, but not necessarily a Subvi. I thought a Subvi is always loaded with the calling VI and has nothing to do with the server of VI. What Miss me?

  Hi Bmihura,

  I think that this article will clear up how the VI Server works with subVIs called statically or dynamically.

  Call a VI by reference

  Best regards

• How to restore the network icons and properties on Windows server 2008

  Original title: network properties

  What is the best way to restore the network icons and properties on Windows server 2008.  The properties of network share folder is empty and the internet icon is missing as well.

  Hi Mitch,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.

• Expiration date and time in SQL server 2008 Enterprise Edition

  Please tell me the exact expiration Date and time in SQL Server 2008 Enterprise, and 2008R2 edition?

  Please tell me the exact expiration Date and time in SQL Server 2008 Enterprise, and 2008R2 edition?

  Hello

  Please post this question in the SQL Server forum.

  Category of the SQL Server:

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Concerning