TypeDef/control of the load of a road fixed
Hi all
I tried to search but could not find this topic. But I doubt if it has not already, examined in the forum of LabVIEW.
In my application, I used custom controls. The application has several "pieces" and each of them uses "similar" (but not necessary even) TypeDef controls that I customized to sequel of the game.
Good feature of LabVIEW is that even if the control file is moved to a different path, he finds and charge it, with a warning. However, in my case, I need to disable this feature for some control files. Is this possible?
I use files from control with the same name, but they are planned for different screws 'call' If this is not a good practice, I can change the names of each control file, adding a prefix/suffix to the name of the calling application. Each control file becomes unique.
But still, this will remain a question. Due to small and appropriate names, I often prefer them with a 'typical' name I would give for such control. As in every application, we have a program of 'hand '. And what I faced, the problem is when I loaded a VI, he 'used' automatically control (bearing the same name as one who waits for this VI) which is already loaded (in a way) by an already open another VI, even if the intended control exist in the expected location. He showed a warning, but did not ask "do you want to load the original, or use the one in the memory?
My question is, is it possible to have a "projected" pathname to be fixed and does not have the VI load the 'recently' opened 'namesake' control under his control expected?
The feature is good, but in some cases, can shut down us or not?
Vaibhav says:
Thanks for the comment Mark!
Yes, it's true.
But what about stop unwanted connections of messsing upward in the first place the program? I mean, before you build a project.
Moreover, if we open a program via the Project Explorer, it would still not allow to open a file whose twin brother is already in the memory. But will it scream before assuming a new connection on its own?
No, the projects work like libraries. Once you have the screw in a project of his name is modified internally, or least how to locate the disk which allows you to open both projects at the same time. The trick here is to get the job done through projects rather than opening the screw directly. As long as you work through the projects themselves, you can use two screws or different typedefs bearing the same name located in different directories at the same time. It's as long as each of them is a member of another project.
Tags: NI Software
Similar Questions
-
Hi all
I am loading a swf into another SWF, I want to controll loaded swf such as play and pause the swf. The loaded swf file is an animation file, all animations are kept in a movieclip, then please tell me how I can control the animation.
In your first assignment, you tell the animation is present in a movieclip. If this movieclip is in the loaded swf file you will probably need to target this movieclip to tell him to play rather than the SWF itself, as in...
currentSWF.movieclipName.play ();
where movieclipName is replaced with the name of the instance of movieclip in the loaded swf file.
-
How to control the video swf loaded in the loading component?
I have an external swf file loaded into the loading component. The external swf loaded into the component loading stops at departure. I want to play by a button outside the loading component that is located in the main swf movie. CAN SOMEONE HELP ME CONTROL THE VIDEO SWF LOADED INTO THE COMPONENT OF LOADING EXTERNAL?
You can target the SWF via the content property of the UILoader. If the name of the instance the UILoader is ldr...
MovieClip (ldr.content) .play ();
-
loadClip and loadmovie - control of the clip after it is loaded!
Hey, just can't get it is as simple as it should be.
I'm trying to learn more about loading movies so I can create a structure for an e-learning course.
I have read so many things, but nothing explains why it does not work.
I have 2 clips on my main timeline. One is an animation that I have just a ball backwards
back and forth. The other is just a blue box converted to a clip.
The bluebox is called cc, its instance name is cc1
the animated film is called insiderMovieClip and its instance name is insiderMovieClip1
Here the code that I wrote.
--------------------------------------------------------
insiderMovieClip1.onRollOver = function() {}
This.Play ();
}insiderMovieClip1.onRollOut = function() {}
This.Stop ();
}
CC1.loadMovie("01-VOM_Meters_INTRODUCTION.swf");
Cc1._width = 50;
Cc1._height = 50;trace ("CC1 =" + cc);
Cc1.onRollOver = function() {}
This.Play ();
}Cc1.onRollOut = function() {}
This.Stop ();
}-------------------------------------------
The film that I load is an entertainment box that moves just a little black box back.
So when I run, I can right-click the insiderMovieClip1, and he begins to animate.
The clip of cc1 reacts anycode I give at all. (for example cc1.stop ();)
Its as if I have loaded into the shell of cc1, but I have no control in there...
I tried several variants of the loadmovide and loadclip. Everything else I can get loaded.
but can't seem to stop or start the movie on my mandate. (actually I can't do anything
but load)
My goal is to load several movies at once, allowing the user to the page between them, but I did not
WAN to start until I say. I want to write it so it pulls a table, then the range
can be dynamic. (IE page 10, page 300, etc...)
Why is loadclip and loadmovie such pain?
[Thanks in advance for your kind help...:]
I can't really follow what you are trying to do, but I'll offer that if you want to control a movie loaded, you must wait until it has loaded before trying to act with her. From what I see of your code, you don't do that. You really want to use loadClip to load the film rather than loadMovie. The reason loadClip supports having an event listeners that you can use to detect when the file is finished loading and then take some steps you plan with the event handler function.
If you search for MovieClipLoader.addListener in the Flash help documents, there is an example that is complete enough for what you need to configure. The main difference being that you would use the onLoadComplete rather than the onLoadInit event.
-
Even after the removal of the string "count to five: a 2 3 4.» 5."since the control of the chain and its replacement by another string, the original string returns after that the VI has been saved then reopened. Whence this string of data? I have attached a copy of the library feature. In my application, I was able to work around the problem by replacing the chain with a constant string control. But I'm still curious to know what is happening.
Thank you
ChuckChuck,
Chain drive was scheduled by default with the string you see. To change it, enter the new string, right-click on the control and select
Operations on the data > default font of the current value
Now, save your vi.
-
How can I control the transparency of the loaded movie?
I used a loader to play a swf file, and I was able to resize it like I want it-now, I would like it to fade in and out. How do I do that? Here's the as3 script I use:
var loader: Loader = new Loader();
loader.contentLoaderInfo.addEventListener (Event.COMPLETE, f);
Loader.Load (new URLRequest ("BldgBanner_r3an.swf"));
addChild (loader);
function f(e:Event):void {}
loader.scaleX =. 80;
loader.scaleY =. 80;
}First set the alpha of the loader to 0. Use then interpolation code to manage the appeasement after loading is complete. If you are not familiar with the actionscript tweening, you can put decomplicate enroute by simply using the Tween class for beginners (see the help documentation). When you have a comfort level, working with code of the tween, or if you are familiar with the installation of new classes and use, then you can consider move to third party classes such as TweenMax tweening / Lite... classes would have been much more efficient than the class Tween.
-
the loading time of the mc control
I'm creating a game that will take care of mangoes with numbers on it... i'm using numbers 08:51
I want to set the time of each mango to load... for example: mango #2 load every second of 48 and 15 at the time, mango 5 load every second 38th, 15th, 3rd time left... How do I code?
I have a code that loads the mangoes in random x position... but when the caught character mango, it still does not load...
Here is a jpg of what I'm doing...
This is the code I use: this code is attached to the mango-(2)
onClipEvent (load) {}
If (_root.time == 50) {-> I tried to put an if statementto determine the loading time but does not work}
function reset() {}
This._x = Random (550);
This ._y =-250;
_root. SPEEDB =-5;
}
Reset();
//}
}
onClipEvent (enterFrame) {}
If (_root.time == 50) {-> I also tried to put here but does not work too...}
This ._y = _root.speedb;
If {(FLF > 380)
Reset();
}
If (_root.mango_mc.inMango_mc.hitTest (_root.caloy_LR.caloy_Right.inBaske t_mc) |) _root.mango_mc.inMango_mc. HitTest (mc _root.caloy_LR.caloy_Left.inBasket_). _root.mango_mc.inMango_mc. HitTest (mc _root.caloy_LR.caloy_stop.inBasket_)) {}
_parent.mango_mc.gotoAndPlay (2);
_root. Score-= 2;
}
//}
}
I hope you guys could help... Thank you!
Here's how to create two mangoes, mango12 and mango 13:
var tl:MovieClip =;
var dep:Number = 0;
tl.attachMovie ("mango12", "mango_" + dep, dep ++);tl.attachMovie ("mango13", "mango_" + dep, dep ++);
var mangoI12 = setInterval(mangoF12,30000); If I remember this, all the mangoes will load every 30 seconds? -No, only mango12
var mangoI13 = setInterval(mangoF13,45000); mango13 is created every 45 seconds
function mangoF12() {}
tl.attachMovie ("mango12", "mango_" + dep, dep ++);
}function mangoF13() {}
tl.attachMovie ("mango13", "mango_" + dep, dep ++);
}
-
I tried update my Adobe Flash Player and in the process, got a number of ads applied to almost all the websites I visit. It seems that the software is think clear and the ads all say ClearThink ads. the software cannot be deleted, as it says that I don't have administrator rights. Norton was blocking but we must remove the software before something worse
It is possible that some other malicious software 'protect' ClearThink to make it more difficult to remove. In some cases, you may need to use one of the special modes of Windows, such as Windows Safe Mode to disable the protection.
But first you might try clearing all other elements installed the same day where she can be part of the same group. I suggest starting here:
Open the Control Panel, uninstall a program. After the loading of the list, click on the column heading "installed on" to group infections, I mean additions by date. This can help the undisclosed items bundle smoker who snuck out with some software, you have agreed to install. Out as much garbage as possible here.
You can "absorb" remain problems with scanning/cleaning suggested in this article of support tools: Troubleshooting Firefox problems caused by malware.
Finally, open Firefox page modules using either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions.
Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.
Clarify that?
-
Implementation of a transfer without control and the Simulation Toolkit function
Hello people,
I'm working on the implementation of a control system for a thermal cycler. And for that, I need a regulatory PID feedback loop and a feedforward controller that reduces the load on the feedback control loop. We were able to implement the PID loop without the box tool (using shift registers and others) but I don't know how to implement a controller feedback whose transfer function I [(35s+1) /(0.0001s+1)].
Can I use a formula node and to implement with a C code? I don't know how to do this in c either.
Any help is appreciated!
Thank you!
sirius18
Hi sirius18,
You can use the formula node to perform the calculations that you mentioned, but it is not C code run. However, the syntax is similar. Here is some information on put a formula into a knot of the formula:
Formula node (help documentation) - http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/formula_nodes/
Example - http://zone.ni.com/devzone/cda/epd/p/id/3058
For those who prefer C, we can write their code, create a DLL and then call their C function using a knot of library function call:
Call library function node (help documentation) - http://zone.ni.com/reference/en-XX/help/371361H-01/glang/call_library_function/
Tutorial (presentation) - http://www.ni.com/white-paper/3009/en
Example - http://zone.ni.com/devzone/cda/epd/p/id/1513
I hope this helps!
Kind regards
-
I have a new 5 lb load cell, I want to replace the old one with. The former load cell had previously been calibrated to the program and was located in the drop down menu, as well as several other cells. So far all I've done is went to edit items in the menu properties ring and add in the name of load cell - I did in all references to the program. There are several references to the cell of support throughout the program, but most is a case of event "loadcell scale" that passes across the cell to the variable global-loadcell scale and a cell nationally for initialization. I have attached a manual for the program I work with (the cell for initialization is not displayed). I have never calibrated a scale before and do not know the appropriate measures, so any advice will be appreciated. I have to do something to the MAX?
as a side question what are and when do you use the stringsand values of the nodes property.
Thank you
Hello
Here are two links about calibration with our software. It is usually done through MAX and step by step instructions can be found in the links.
http://digital.NI.com/public.nsf/allkb/D22B70F72C3FB23286256F15005C2575?OpenDocument
http://zone.NI.com/DevZone/CDA/tut/p/ID/4845
As to when to use property nodes, they are used whenever you want to programmatically set some properties or attributes. For example, if you want to programmatically change the color of the text in a control that is based on what is displayed or channel indicator or resize the control or the indicator.
-
After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything
Hello
1. what operating system is installed on your computer?
2. is it works much earlier?
3. don't you make changes before the problem?Check if the game is compatible with Windows 7 Compatibility Web site. The game mentioned above is not listed in the compatibility Web site, it may or may not be compatible with Windows 7.
I suggest that you follow these steps and check if the problem persists.
Step 1:
Update of your display drivers and check if the problem persists.
Step 2:
Reduce hardware acceleration and check.a. click the Start button, Control Panel.b. now, select appearance and personalization. under display, select adjust screen resolution.c. now, select adjust the resolution.d. click Advanced settings.e. now, click the Troubleshooting tab, and select the change settings button.f. in the Security dialog box, click on continue.g. move the hardware acceleration slider to the third notch.h. click OK.i. restart Windows.Step 3:
If the game worked fine in the earlier version of the operating system, I suggest you run the game in compatibility mode.
-
Original title: loading windows live messenger.
Can I sign OK, but the Messenger pop up again a loading circle constantly on. I have no control over the Messenger at all. I HAV done a shoot of disorder and he just incompatible application. can someone tell me how to fix here
Hi stevethe,.
In dealing with the problem with Windows Live Messenger, I recommend you post your question in Windows Live Solution Center for assistance.
Hope the helps of information.
-
Difficulty with returns control to the parents program after call asynchronous Subvi
I'm trying to set up a directory of context-sensitive help for one of my programs. This is the first time I tried an asynchronous call and I can't seem to make it work properly.
The attached HelpDir.vi is the parent program that gives the user different help files to choose. When the user selects a help file, its Subvi should appear. I would like the user able to let this help file upwards and close the help directory or select another help file to upsimulataneously, if they wish.
The strange thing is that, currently, this vi works exactly as I want if I stress execution on, but works normally, the HelpDir.vi becomes unresponsive when we help files was loaded and becomes sensitive again once the help file has been left.
I set up the parent program with a structure of the event running asynchronous call and forget everything as in the example of the expedition to the France so I do not know why the program parent is not recover control after the launch of the Subvi. Please take a look and let me know if you see what I'm missing.
PS, You may need to update both static references. I don't know if they break when you send the code this way.
Thank you
Tim
Change your dialogues float instead of Modal. Modal windows will always be on top. In the changing Floating, then you can access the window of your main VI as well.
Performance highlight should substitute somehow the disorder of modal window.
-
"the service cannot accept messages of control at the moment."
Cannot download and install all files. I get this response, "the service cannot accept messages of control at the moment."
Hi Frank St.
What web browser do you use? This happens on a particular Web site or any web sites?
Please provide the complete error message you receive.
Let us know which files you are trying to download for a better understanding of the issue.
The problem may be temporary. Wait a few minutes and then retry your operation.
If the problem persists,
Step 1: Run Internet Explorer in "no Add-ons" mode and test
To determine if the error is caused by an add-on, run Internet Explorer in "no Add-ons" mode To do this, follow these steps:
1. click Startand type Internet Explorer in the box start the search .
2. click on Internet Explorer (No Add-ons). Internet Explorer opens without Add-ons, toolbars, or plug-ins.
3. test Internet Explorer to verify that it works correctly. If problems occur always, try step 2
If no error occurs, the problem is caused by one of the Add-ons that typically load with Internet Explorer. In this case, follow the steps mentioned in the link to determine which add-on is causing the problem
Optimize internet Explorer
http://support.Microsoft.com/kb/936213
(See method 3-2 in the link)
Let us know if it works
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Fix there work and corrected updates, but updates the load upwards and will not be installed. Error 'WindowsUpdate0000057A' 'Windows update_dt000' on control spent installs almost all office 2003, Excel, Word etc failed sine 5/12 2012.
See if this helps: http://support.microsoft.com/kb/906602
Maybe you are looking for
-
What Apple Cinema Display Monitor for my mid 2010 iMac 27
Thinking of getting a 22 to 24 "Cinema Display to my iMac 27. Looking for the matte screen. What should I look for?
-
How do I authorize my computer WIndows 10 to play my music?
Desktop computer Windows 10 using iTunes for several years. Just added a new HP screen. iTunes now refuses to play my music because "this computer is not authorized" to play! What has changed? Where it allow?
-
Is it possible to use a Tablet digiitizer (as a unit of Wacom) to create or diagrams to draw freehand; If so, how to set it up? Chuck C
-
My HP Photosmart C5180 gives me - error Oxc19a0021 ink system failure
How can I fix this or do I have to get a new printer?
-
from scratch I had to pull the battery on my dell p.c.Now I need to reset everything on the machine. I can handle most of it, but I don't ' know not the initial settings for bios and other initial set up details.» My screen there "list of questions a