Typo in the management of yoba for Y580

Similar Questions

• Explorer Windows doesn't do not work when left clicked in the taskbar. Explorer.exe is running in the Manager of tasks for only a few seconds then cuts.

  I have a problem with the Windows Explorer. When I left click on the taskbar Task Manager indicates that explorer.exe is running, but deletes then after a few seconds. I can right-click in windows Explorer and select any file frequent or pinned and who opens, okay, right click in windows explore does not work. I clicked the windows Explorer and checked the properties that appear to be identical to my second PC that is also running windows 7 and works very well. I also open the location of the files and tried to launch explorer.exe in c:\windows which gives the same result. Can someone help me please.

  Hello
  Welcome to the Microsoft answers forum.
   
  I suggest you perform the clean boot.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps:

  1. click on start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  When you are prompted, click on restart.
  After the computer starts, start the program or game and see if the problem is resolved.
   http://support.Microsoft.com/kb/331796

  You can also perform a full scan of your computer, please visit this link:

  http://OneCare.live.com/site/en-us/default.htm

  You can also try running sfc scan, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions
     http://support.Microsoft.com/kb/254649

  You can also check in safe mode, please visit this link:

  http://windowshelp.Microsoft.com/Windows/en-us/help/d063548a-3fc9-4723-99f3-b12a0c4354a81033.mspx

  Thank you and best regards,
  Azam - Microsoft Support

• Firefox does not start. After starting the browser, it shows that it is running in the Manager of tasks for a while, but then it disappears.

  It works in mode safe mode with networking however.

  Thank you very much for the event log display, I could tell by the bold part.

  Failing application name: firefox.exe, version: 22.0.0.4917, timestamp: 0x51c06b1b name of the failing module: trf.dll, version: 3.5.1208.44, time stamp: 0x51e583c1 Exception code: 0xc0000005 fault offset: 0x00003f26 id of the failed process: 0xff4 Faulting application start time: path 0x01ce93605432e11b of the failing application: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe path of the Faulting module: C:\Program Files (x86)\Trusteer\Rapport\bin\trf.dll report Id : 94132cc5-ff53-11e2-b2ee-00262298267f

• where the Manager of power for windows 8.1 (Z510)

  Why lenovo? Please define the type for download

  
  

• Using the Manager of synchronization for exe OI LabVIEW and TestStand

  We would like our operator LabVIEW executable Interface send data via a queue of TestStand to a sequence of logging.  The SyncManager API looks like a slick way to do this because it allows access to the synchronization objects other processes outside TestStand TS.  I created an experimental sequence of trying the concept.  The sequence creates a queue with a step of queue TestStand, up a point to another TS not queue, then uses calls to ActiveX in the SyncManager API to add another element to the queue of waiting.  That all works.

  When I added a LabVIEW VI to place another element through similar calls to ActiveX in the SyncManager API, the VI is not a valid reference to the queue and so it cannot place the element.

  I read on the forum that TS queue name must start with * in order to be accessed by separate processes on the same computer.  When I add a * on my queue name, queue TS operations continue to operate, but step that uses a call of ActiveX in the SyncManager API to get a reference to the queue returns one null ref so the next step of enqueue ActiveX returns an error.  In addition, the LabVIEW VI still does not receive a valid reference to the queue either.

  Ideas and suggestions welcome!  The sequence and LabVIEW VI are attached. Using LV and TS 2012, obtained similar results in 2013SP1.

  Thank you!
  Hans

  The queue API expects a PropertyObject not a string for the newElementPropObj parameter (not sure why LabVIEW similarly let you thread a string). To create a new PropertyObject, you can do something similar to the following:

  myProperty = engine. NewPropertyObject (PropValType_String, false, "", 0);

  myProperty.SetValString ("", 0, theActualString);

  Enqueue it.

  Close the ref to myProperty after you're done with it (i.e. after the queue it) in order to avoid leaking.

  -Doug

• I cannot select Add a credential to windows of the Manager of passwords for your network logon

  I have a broken drive on my home wireless network. I'm on windows vista home Premium, I tried to add a credential of your network manager on the left panel of user accounts.  Yes, there are two types of credentials, but only 'A credential to Windows logon' name is grey, I can't choose a website or the credentials of the program.  but the point is that I tried to add windows credentials not Web site.  So please, could someone help me with this, how to take off the point greyed so that I can select credential window.

  Hi Happiejuan,

  You can follow the steps given by Michael Murphy, see the link below that relates to a similar question

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/c86d346a-2d8e-44A6-9c81-f528b9941db7

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite C660-1J2 - the screen goes black for a second

  Hey everybody.

  I recently changed my HARD drive and did a reinstall fresh, as previous was damaged. What is happening now is that whenever I have connect or disconnect the cable the screen goes black for a second. There is no real consequence of this, I'd rather just if there was an option to make it happen.

  Then, give a shout someone if you know how to deal with this.

  Hello

  > I have recently changed my HARD drive and did a reinstall of fees
  You have installed Windows from Toshiba normal Microsoft Windows disk or recovery disk?

  To me it sounds like that, you forgot to install the display driver. Also check the Manager of devices for the yellow exclamation points or unknown devices.
  Make sure that correct display driver is installed. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Reusing the same tile VMs for the iterative test - is - this supported?  Get errors on the second sleeve

  I configured a single partial tile, leaving aside the day before virtual machine and the virtual Microsoft Exchange computer.

  I had a successful run from start to finish on this tile.

  I then re-directed the harness again (note, between the virtual machines have been turned off so I could clone them to start doing additional tiles).

  The second time, I started the harness, and it stops at the VMmark installation phase:

  -Could not Ping the following machines: OlioDB0

  Since the first customer, I ping OlioDB0 and got a successful response

  The command would be "staf OlioDB0 ping ping" from a windows command prompt.

  You can look in the Manager of tasks for STAFproc.exe.

  If this is not the case, you can connect to your DS2DB0 via ssh and run the following two commands: (note the time and space)

  . /usr/local/STAF/STAFEnv.sh

  / usr/local/SCOTT/bin/STAFProc

• Is there a file management utility availabe for transfer files from Iphone to PC using the USB connection or wifi? Thank you

  Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you

  You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.

• Where the Manager of power supply for Thinkpad E440 8.1 on windows

  Hello, is there any manager of power for thinkpad E440 8.1 on windows, I have already installed the driver for power management since the lenovo support site, but I think I need to install the power manager. is it good?

  If so, are there no power manager for thinkpad E440 8.1 so far on windows?

  so, how can I manage the threshold for the load?

  Good day and welcome to the community.

  ThinkVantage Power Manager has not been supported since Win7. It is reported in the community members apparently makes it work, but it is not sanctioned. There are also discussions on loading of the thresholds through registry changes. Please be careful if you choose to pursue it.

  Kind regards.

• do I need to use the product for the management of the recovery key to refresh the window 8.1?

  do I need to use the product for the management of the recovery key to refresh the window 8.1?

  No, the product key will be automatically read from the BIOS.

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• Attachment Manager will work for the e-mail Client?

  Hello

  In my application, I work with mail attachments. So I used for this requirement, Custom Attachment Manager. But in the messages application, what that is the post is there, for those who work only Attachment Manager. So I have different e-mail accounts like gmail, yahoo mail. For those, the menu option is displayed, but it won't start my application. Because it's reching for the run method:

  public void run(Message m, SupportedAttachmentPart p)
  {
  
  }
  

  But as it isn't the Message application, it is not able to open the application. In the documentation, they mentioned that: 'the system calls this method on the thread of the application event Messages'.

  So I would like to know, whether the emails from another application is possible to open? Is there another way?

  And for parts joined, without prefix of x-rimdevice, why it doesn't work?

  If someone gives alternatives, it will be a very useful to me...

  Thank you...

  I merged your son so I can answer in one place.

  AttachmentHandler is able to access the content of attachments that have the file name prefixed with x-rimdevice and for the types that are not natively supported on the device.  This means that you cannot use this approach for .txt files, but you can create a new extension for your attachments, so they are delivered.

  Note that unless the x-rimdevice is preceded by an attachment, it is issued to the device.  The accessory remains on the box to the user mailbox and can be retrieved later by the user or by using AttachmentDownloadManager.  This was done to save bandwidth wireless.  The same process is true for you transfer messages.  When a user sends a message, attachments on the original e-mail are not sent from the device.  They pick up on the side server of the mailbox of the user.  If a user connects to a new file locally on the device, then of course that one would need to be sent from the device.  So if you read a sent, transmitted the message the accessory itself does not exist on the device.

• touch events for several fields in the Manager of several

  In my application... I have a vertical field (VFM) Manager in the screen.

  In this optimization of resources, I inserted 3 manaagers:

  (1) District Manager hfmHeader horizontal (in which I added 1 label (NON_FOCUSABLE) and 1-2 Btns according to the conidtion (tuochEvent FOCUSABLE and overrried all in initlilsing it).)

  (2) District Manager vertical ListField container or TextField or LabelField vfmManager in accordance with the condition.

  ((3) District Manager horizontal hfmButtons containing 6 btns... all tuochEvent FOCUSABLE and overrried initlilsing while the).

  public int getFieldAtLocation (int x, int y)
  {
  XYRect rect = new XYRect();
  int index = getFieldCount()-1;
  While (index > = 0)
  {
  getField (index) .getExtent (rect);
  If (rect.contains (x, y))
  break;
  -the index;
  }
  return to index.
  }

  Second, the click event try something like:

  protected boolean touchEvent(TouchEvent event)
  {
     switch( event.getEvent()  )
     {
          case TouchEvent.CLICK:
            int index = getFieldAtLocation(event.getX(1),
                                           event.getY(1));
            // Ignore click events outside any fields
            if (index == -1)return true;
            Field field = getField(index);
            if(field.equals(bitmapField))
            {
              System.out.println("Bitmap Clicked");
            }
          return true;
     }
     return super.touchEvent(event);
  }
  

  Even when I am using above solution, can't scroll. and click event of the hfmButtons buttons aren't the gt performed.

  Second... If I don't stand... I am able to scroll and executed at least the first 3 buttons click event.

  How can I implement for each button click event in any Manager? Is this possible...

  Can someone please help in this regard. Any suggestion or if possible code snippet will be appreciable.

  Thank you

  Use the snippet for each manager of...

  case TouchEvent.CLICK:
  India = getFieldAtLocation (event.getX (1),)
  event.getY (1));
  If (India! = - 1) {}
  Field fm = getField (India);
  {if (FM. Equals (vfmMain))}
  int index1 = vfmMain.getFieldAtLocation (event.getX (1),)
  event.getY (1));

  If (index1 >-1) {}

  Field = vfmMain.getField (index1);

  check field is instance of the field you want

  {if (Field.Equals (footerManager))}
  Container.isFooterManager = true;
  int index2 = footerManager.getFieldAtLocation (event.getX (1), event.getY (1));

  Search fields in the Manager of this...

  } ElseIf... {

  go on the same cehcking

  } ElseIf {}

  ... like this, go to the control...

  }

  }

• [Q] how to build and install an SSL certificate signed for the management of a Cisco 5508 WLC?

  Our security policy requires that all web pages admin must be signed by our CA business. I have successfully implemented a SSL certificate 3rd party Auth Web our WLAN of comments, but I need to install a self-signed certificate for the management of the WLC himself. I followed the instructions here:

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

  but it was more useful for Web auth. I can't find a specific document explaining how it should be done for the management interface.

  Any help much appreciated.

  (1) Please use a password. Empty passwords regularly give problems.

  (2) you don't recombine the key with the certificate before you download to the WLC:

  Combine the CA.pem certificate with the private key, and then convert the file to a .pem file.

  Type this command in the OpenSSL application:

  openssl>pkcs12 -export -in CA.pem -inkey mykey.pem -out CA.p12 -clcerts
  
      -passin pass:check123 -passout pass:check123
  
      
  
      !--- This command should be on one line.
  
  
      openssl>pkcs12 -in CA.p12 -out final.pem -passin pass:check123 -passout pass:check123
  
      

  Note: In this command, you must enter a password for the parameters -passin' and -passout . The password is set to the setting -passout must match the setting SubscriptionId is configured on the WLC. In this example, the password is configured at the time the -passin' and settings -passout is check123. Step 4 of the procedure in the section download the WLC third certificate of this document deals with the configuration of the SubscriptionId parameter.

  The final.pem is the file that is transferred via TFTP to the Cisco WLC.

  Now that you have the certificate of the third-party CA, you must download the certificate to the WLC.